JENN-AIR JED4430WB, JED4430WS, JED4430WR Dimension Guide
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
A
B
I
B
J
E
30" JX3™ ELECTRIC RADIANT DOWNDRAFT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JED4430W – 30" x 183⁄8" x 221⁄8"
PRODUCT DIMENSIONS
MODEL # JED4430W
Overall width
Euro-Style Stainless 30 76.2
A
Floating Glass 293⁄4 75.6
Overall depth
Euro-Style Stainless 221⁄8 56.2
B
Floating Glass 22 55.9
Width of recessed cooktop 281⁄2 72.5
C
Width of blower motor assembly 121⁄2 31.8
D
Height from blower motor to countertop 183⁄8 46.8
E
Height of recessed cooktop 37⁄8 10.0
F
Height from electrical housing to countertop 85⁄8 22.0
G
Height of cooking surface
H
Depth of recessed cooktop 21 53.4
I
Height from plenum to countertop 167⁄8 42.8
J
TOP VIEW
B
A
C
H
F
G
1 of 4
in cm
1
⁄4 0.6
E
FRONT VIEW
B
SIDE VIEW
D
I
J
E
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8557Cd Zw815
JENN-AIR® DETAILED PLANNING DIMENSIONS
Side
Cabinet
J
K
Side
Cabinet
E*
J
F
D
e
A
B
B
v
C
I**
K
H
v
G
C
30" JX3™ ELECTRIC RADIANT DOWNDRAFT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JED4430W – 30" x 183⁄8" x 221⁄8"
2 of 4
OPENING/CLEARANCE DIMENSIONS
A
E*
B
H
G
e
D
FRONT VIEW
C
C
Side
Cabinet
J
v
v
I**
K
MODEL # JED4430W
in cm
Width of combustible area above
A
cooking surface (min.)
Width from cooktop to fixed wall
B
or other combustible material (min.)
Width to center of vent opening option
C
Width to outer edge of outlet
D
Height to bottom of uncovered wood or
E*
metal cabinet above cooking surface (min.)
Height to bottom of uncovered wood
F
F
B
or metal cabinet (min.)
Height to center of vent opening option
G
Height to top edge of outlet (min.)
H
Depth to center of vent opening option
I**
Depth of upper cabinet (recommended)
J
Depth from cutout to wall (min.)
K
Width of cutout
L
Depth of cutout
M
Depth from cutout to front of countertop
N
e
Recommended electrical access location
Recommended venting location –
v
see page 3-4 for ducting information
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
**Based on installation in a 24" (61.0 cm) base cabinet.
30 76.2
21⁄2 6.4
85⁄8 21.9
10 25.4
30 76.2
18 45.7
16 40.6
12 30.5
163⁄4 42.4
13 33.0
11⁄2 3.8
287⁄8 73.4
211⁄8 53.7
2 5.1
ELECTRICAL REQUIREMENTS
240 volt, 60 Hz, AC only, 40-amp fused, electrical circuit is required.
A dedicated circuit is recommended.
VENTING REQUIREMENTS
This cooktop must be exhausted outdoors unless using the duct-free filter
kit (JDA7000WX). Refer to kit instructions for further information.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider than the cutout.
• A minimum clearance of 6" (15.2 cm) is recommended between the side of the
cooktop and side wall for maximum ventilation performance.
• A minimum clearance of 2" (5.1 cm) is recommended between the blower motor
and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for
servicing access.
• An under counter built-in oven cannot be installed under this cooktop.
L
K
M
N
SIDE VIEW TOP VIEW – CUTOUT
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8557Cd Zw815
Loading...