company
a
1
Ceiling aperture
Ø80-130mm
This Converter Plate is used to
cover an existing hole in the
ceiling from a Minimum of
Ø80mm to a Maximum of Ø130mm.
2
Remove Ceiling Spring Clips
from both sides of the fitting.
Ceiling Spring
Clips
3
Attach the replacement Spring
Clips that are supplied with the
Converter Plate.
4
Insert Inner Locator, Silicone
Seal & Intumescent Gasket
into the ceiling hole.
Ceiling
Inner Locator,
Silicone Seal
& Intumescent
Gasket
6
5
7
Wire luminaire to the main supply
and insert into the Inner Locator
fitted in Step 4.
Secure to the ceiling using
Clamps provided.
Ceiling
Ceiling Clamps
Assemble Converter Plate Front
Bezel over the driver & housing
as shown below.
Front Bezel
Front Bezel
Converter Plate
Spring Clips
Please refer to luminaire installation sheet
for wiring guidelines.
9.5
FGLED® Range accessories
Installation Sheet
Please read these instructions before
installation and retain for future reference
Prole & Dimensions
This Converter plate is only suitable for use with
the following products from the FGLED® range
Fire-rated Converter plate
FGLED®3/6/10
JC94180
JC94184*
Fire-rated Tilt Converter plate
This Converter plate is only suitable for use with
the following product from the FGLED® range
FGLED6® Tiltable
78/88*
170
All dimensions in millimetres
RoHS
Compliant
Registered Firm Certicate No. GB 1552
Drg No. JC94180-IS Issue: D - 03.11.15 - RCS
JCC Lighting Products Ltd. Innovation Centre Beeding Close Southern Cross Trading Estate Bognor Regis West Sussex PO22 9TS Technical Support: 01243 838986 Customer Services: 01243 838999
BS EN ISO9001 - 2008
IP65/20*
jcc.co.uk
Loading...