PD6322/66
Key Features:
䉴
Two high power 300 mm (12 in)
transducer s in a compact slot-loaded
configuratio n for low frequency extension
to 40 Hz.
䉴
High power CMCD™ Cone Midrange
Compression Driver provides high sensitivity and high continuous SPL capability
along with low distortion, extended bandwidth and improved phase coherence.
䉴
Large format neodymium HF driver provides clear, intelligible high frequency
projection.
䉴
Large PT™ Progressive Transition™ waveguides provide consistent 60° x 60° pattern control, low distortion at high SPL
levels and smooth frequency response.
䉴
Rotatable mid and high frequency waveguides allow either horizontal or vertical
cabinet orientation.
䉴
Sophisticated, steep-slope passive midhigh crossover network with switchable
tri-amp/bi-amp crossover modes.
Applications:
䉴
Performing arts facilities / Live theaters
䉴
Auditoriums / Houses of worship
䉴
Dance clubs / Sports facilities
PD6322/66 is a Precision Directivity™
60° by 60° full range, three way loudspeaker
designed for use in arrays or singly in
demanding music or speech system applications requiring high output capability with
excellent pattern control and low frequency
extension to 40 Hz.
The low frequency section, two 2206H
300 mm (12 in) VGC™ Vented Gap Cooled
low frequency transducers, offers high
power handling and low power compression for high continuous SPL capability. A
newly designed LF loading plate provides
the highest possible sensitivity, low frequency output and system reliability.
The mid and high frequency sections are
horn-loaded for maximum sensitivity and
pattern control. The CMCD-82H cone
midrange compression driver consists of a
driver/phasing plug assembly providing high
output with low distortion. The design’s
extended response coupled with a small
100 mm (4 in) exit diameter allow for
smoother transition to the high frequency
driver in the magnitude and polar pattern
domains. The integral 200 mm (8 inch) cone
driver features a high power Differential
®
Drive
dual, voice coil design. The 2432H
large format high frequency compression
driver utilizes a neodymium magnet and aluminum diaphragm to deliver clear and intelligible high frequency projection, extended
frequency response, and low distortion at
even the highest drive levels.
High Output Three-Way
Full-Range Loudspeaker
with 2 x 12" LF
Specifications:
Frequency Range1(-10 dB): 41 Hz to 18 kHz
Frequency Response1(±3 dB): 49 Hz to 16 kHz
System Sensitivity6(1W @ 1m): Passive Mode: 110 dB-SPL (mid/high section only)
Transducers:
Physical:
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC
(H x W x D in vertical orientation): (39.0 x 26.5 x 27.8 in)
1.
In bi-amp mode, with recommended active tuning.
2
Resultant engineered acoustical response of crossover network and components.
3
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES
2 hr rating plug long-term 100 hr rating are specified for low-frequency transducers.
4
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5
Calculated based on power rating and sensitivity, exclusive of power compression.
6
Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
Coverage Pattern: 60° x 60°
Directivity Factor (Q): 22.4
Directivity Index (DI): 13.5 dB
Crossover Modes: Tri-amp/Bi-amp (passive mid-high) switchable
Passive Crossover2: 1.75 kHz
Transducer Power Ratings LF: 1600 W (6400 W peak)
Long-Term System Power Bi-amplified Passive Mode: LF: 1200 W (4800 W peak)
Low Frequency Driver: 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil
Nominal Impedance: 4 ohms (2 x 8 ohms, internally wired in parallel)
Sensitivity
Operational Band): 96 dB-SPL
Mid Frequency Driver:
Nominal Impedance: 8 ohms
Sensitivity6(1W @ 1m): 110 dB-SPL
High Frequency Driver:
Nominal Impedance: 8 ohms
Sensitivity6(1W @ 1m): 116 dB-SPL
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Input Connectors: Neutrik Speakon
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
(AES)3: MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2 hrs
Rating (IEC)4: Bi-amplified Passive Mode: M/HF: 300 W (1200 W peak), 100 hrs
Maximum SPL
6
(1W, 1m within
Waveguides:
Dimensions 991 x 673 x 706 mm
Net Weight: 71.4 kg (157.5 lb)
5
: Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)
Passive mode: 135 dB-SPL cont avg (141 dB peak)
CMCD-82H cone midrange compression driver with intergral 200 mm (8 in)
Differential Drive®dual 75 mm (3 in) voice coil driver
2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil
MF: PT-N66MF-1 600 x 600 mm (24 x 24 in)
HF: PT-H66HF-1 300 x 300 mm (12 x 12 in)
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
Versions: from direct exposure to the elements. WRX for direct exposure or
11-ply Finnish birch plywood.
(eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
extreme environments, such as tropical or beach, or in areas with salt air,
extreme high humidity or rapid changes in temperature. See WRC/WRX
configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
backing (grille cloth backing on white units)
Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width
9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loopthrough.
or WRX.
MF: 135 dB-SPL cont avg (141 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
®
, 2 hrs. 1200 W (4800 W peak), 100 hrs
NL8, plus CE-compliant covered barrier strip terminals.
䉴 PD6322/66 High Output Three-Way Full-Range Loudspeaker
Beamwidth
360
100
Horizontal
-6 dB Beamwidth (degrees)
Directivity Index, Q
Vertical
10
20 100 1000 10000 20000
20
10
Frequency (Hz)
Directivity Index (DI), dB
0
20 100 1000 10000 20000
Frequency (Hz)
Dimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet
300 (11.8)
15˚
706 (27.8)
To p
100
10
Directivity Factor (Q)
1
Tri-Amp FIR Frequency Response and Raw Impedance
110 316
100
90
SPL (dB)
80
70
20 100 1000 10000 20000
Horizontal Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
- - - - - - - - - HF
---------------------- MF
---------------------- LF
Frequency (Hz)
Frequency (Hz)
100
31.6
Ohms
10
3.16
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
Vertical Up Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Frequency (Hz)
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
Vertical Down Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Measurements obtained in bi-amp mode using FIR filters. Graphs are from
unaltered measured data.
Frequency (Hz)
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
991 (39.0)
673 (26.5)
Front Side Back