JBL PD6322/43 User Manual
PD6322/43
Key Features:
䉴
Two high power 300 mm (12 in)
transducer s in a compact slot-loaded
configuratio n for low frequency extension
to 40 Hz
䉴
High power CMCD™ Cone Midrange
Compression Driver provides high sensitivity and high continuous SPL capability
along with low distortion, extended bandwidth and improved phase coherence
䉴
Large format neodymium high frequency
driver provides clear, intelligible high
frequenc y projection
䉴
Large PT™ Progressive Transition™ waveguides provide consistent 40° x 30° pattern control, low distortion at high SPL
levels and smooth frequency response
䉴
Rotatable mid and high frequency
waveguide s allow either horizontal or
vertica l cabinet orientation
䉴
Sophisticated, steep-slope passive midhigh crossover network with switchable
tri-amp/bi-amp crossover modes
Applications:
䉴
Performing arts facilities / Live theaters
䉴
Auditoriums / Houses of worship
䉴
Dance clubs/ Sports facilities
PD6322/43 is a Precision Directivity™
40° by 30° full range, three-way loudspeaker
designed for use in arrays or singly in
demanding music or speech system applications requiring high output capability with
excellent pattern control and low frequency
extension to 40 Hz.
The low frequency section, two 2206H
300 mm (12 in) VGC™ Vented Gap Cooled
low frequency transducers, offers high
power handling and low power compression for high continuous SPL capability. A
newly designed LF loading plate provides
the highest possible sensitivity, low frequency output and system reliability.
The mid and high frequency sections are
horn-loaded for maximum sensitivity and
pattern control. The CMCD-82H cone
midrange compression driver consists of a
driver/phasing plug assembly providing high
output with low distortion. The design’s
extended response coupled with a small
100 mm (4 in) exit diameter allow for
smoother transition to the high frequency
driver in the magnitude and polar pattern
domains. The integral 200 mm (8 inch)
transducer features a high power Differential
®
Drive
dual voicecoil design. The 2432 H
large format high frequency compression
driver utilizes a neodymium magnet and aluminum diaphragm to deliver clear and intelligible high frequency projection, extended
frequency response, and low distortion at
even the highest drive levels.
High Output Three-Way
Full-Range Loudspeaker
with 2 x 12" LF
Specifications:
Frequency Range1(-10 dB): 41 Hz to 18 kHz
Frequency Response1(±3 dB): 49 Hz to 16 kHz
System Sensitivity (1W @ 1m): Passive Mode: 111 dB-SPL (mid/high section only)
Transducers:
Physical:
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use
(H x W x D in vertical orientation): (39.0 x 26.5 x 35.3 in)
1.
In bi-amp mode, with required active tuning.
2
Resultant engineered acoustical response of crossover network and components.
3
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2
hr rating plus long-term 100 hr rating are specified for low-frequency transducers.
4
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5
Calculated based on power rating and sensitivity, exclusive of power compression.
6
Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
Coverage Pattern: 40° x 30°
Directivity Factor (Q): 24.1
Directivity Index (DI): 16.0 dB
Crossover Modes: Tri-amp/Bi-amp (passive mid-high) switchable
Passive Crossover2: 1.7 kHz
Transducer Power Ratings
Long-Term System Power Bi-amplified Passive Mode: LF: 1200 W (4800 W peak)
Sensitivity6(1W, 1m within 96 dB-SPL
High Frequency Driver: 2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard-
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Rating (IEC)4: M/HF: 300 W (1200 W peak), 100 hrs
Maximum SPL5: Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)
Low Frequency Driver: 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil
Nominal Impedance: 4 ohms (2 x 8 ohms, internally wired in parallel)
operational band):
Mid Frequency Driver: CMCD-82H cone midrange compression driver with integral 200 mm
Nominal Impedance: 8 ohms
Sensitivity6(1W, 1m): 112 dB-SPL
Nominal Impedance: 8 ohms
Sensitivity6(1W @ 1m) 116 dB-SPL
Waveguides:
Enclosure: Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior
Versions: from direct exposure to the elements. WRX for direct exposure or
Input Connectors: Neutrik Speakon®NL8, plus CE-compliant covered barrier strip termi-
Dimensions 991 x 673 x 897 mm
Net Weight: 87.3 kg (192 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
LF: 1600 W (6400 W peak), 2 hrs. 1200 W (4800 W peak), 100 hrs
(AES)3: MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2 hrs
MF: 137 dB-SPL cont avg (143 dB peak)
Passive mode: 136 dB-SPL cont avg (142 dB peak)
(8 in) diameter Differential Drive®dual 75 mm (3 in) voice coil driver
coil
MF: PT-N43MF 600 x 600 mm (24 x 24 in)
HF: PT-H43HF 300 x 300 mm (12 x 12 in)
grade 11-ply Finnish birch plywood.
ware (eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See
WRC/WRX configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
backing (grille cloth backing on white units)
nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.
WRC or WRX.
HF: 135 dB-SPL cont avg (141 dB peak)
897 (35.3)
285 (11.2)
12.5˚
991 (39.0)
673 (26.5)
To p
Front Side Back
䉴 PD6322/43 High Output Three-Way Full-Range Loudspeaker
Beamwidth
360
100
Horizontal
-6 dB Beamwidth (degrees)
Directivity Index, Q
Vertical
10
20 100 1000 10000 20000
20
10
Frequency (Hz)
Directivity Index (DI), dB
0
20 100 1000 10000 20000
Frequency (Hz)
Dimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet
100
10
Directivity Factor (Q)
1
Tri-Amp FIR Frequency Response and Raw Impedance
110 316
100
90
SPL (dB)
80
70
20 100 1000 10000 20000
Horizontal Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
- - - - - - - - - HF
---------------------- MF
---------------------- LF
Frequency (Hz)
Frequency (Hz)
100
31.6
Ohms
10
3.16
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
Vertical Up Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Frequency (Hz)
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
Vertical Down Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Measurements obtained in bi-amp mode using FIR filters. Graphs are from
unaltered measured data.
Frequency (Hz)
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
Loading...