JBL PD6212/43 User Manual
PD6212/43
Key Features:
䉴
300 mm (12 in) horn-loaded LF and large
forma t HF driver – high sensitivity design
with high continuou s SPL capability.
䉴
Large PT™ Progressive Transition™ waveguides provide broad band 40° x 30° pattern
control, low distortion at high SPL levels and
smooth frequenc y response.
䉴
Rotatable low and high frequency waveguides allow either horizontal or vertical cabinet orientatio n.
䉴
Sophisticated, steep-slope passive crossover
network with switchable bi-amp/passive
crossover modes.
Applications:
䉴
Performing arts facilities
䉴
Live theaters
䉴
Auditoriums
䉴
Houses of worship
䉴
Dance clubs
䉴
Sports facilities
PD6212/43 is a Precision Directivity™
40° by 30° loudspeake r designed for applications requiring high output capability with
excellent pattern control. PD6212/43 can be utilized alone in music or speech systems where
frequency extension to 80 Hz is adequate or
combined with subwoofers to create extended
bandwidth full-range systems.
The M222-8A 300 mm (12 in) low frequency
transducer features high sensitivity and low
power compression for high continuous SPL
capability. It is horn-loaded for additional sensitivity and improved pattern control. A newly
designed low frequency phasing plug extends
frequency response, providing smoother transition to the high frequency driver. The 2453H
large format high frequency compression driver
utilizes a neodymium magnet and pure titanium
diaphragm to deliver clear and intelligible high
frequency projection, extended frequency
response, and low distortion at even the highest
drive levels.
Large PT Progressive Transition waveguides
achieve an optimum balance of extremely well
controlled coverage with low distortion, smooth
frequency response, and natural sound character. The low and high frequency horns are rotatable for cabinet positioning in either horizontal
or vertical orientation. High-slope crossovers
minimize band overlap and a well-controlled
off-axis response enhances arrayability.
The loudspeaker can be operated in either biamplified or in full passive mode. In either case,
digital signal processing is required in order to
achieve specified performance. Input connectors
include both Speakon
ered barrier strip for hookup versatility. The
cabinet is fitted with twenty M10 threaded suspension points, supporting a wide variety of
installation approaches.
PD6212/43 is part of JBL’s broad lineup of
installed sound loudspeakers, complementing
the larger PD700 mid-high cabinets with a more
compact size and greater low frequency extension, and supplementing the smaller AE Series
cabinets with higher SPL capability and larger
horns for pattern control to a lower frequency.
®
and CE-compliant cov-
High Output Two-Way
Full-Range Loudspeaker
with 1 x 12" LF
Specifications:
Frequency Range1(-10 dB): 80 Hz to 18 kHz
Frequency Response1(±3 dB): 90 Hz to 16 kHz
System Sensitivity (1W @ 1m): Passive Mode: 109 dB-SPL
Transducers:
Physical:
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use
(H x W x D in vertical orientation): (39.0 x 26.5 x 35.3 in)
1.
In bi-amp mode, with required active tuning.
2
Resultant engineered acoustical response of crossover network and components.
3
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2
hr rating plug long-term 100 hr rating are specified for low-frequency transducers.
4
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5
Calculated based on power rating and sensitivity, exclusive of power compression.
6
Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.
Coverage Pattern: 40° x 30°
Directivity Factor (Q): 24.1
Directivity Index (DI): 16.0 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover2: 850 Hz
Transducer Power Ratings
Long-Term System Power Passive Mode: 300 W (1200 W peak), 100 hrs.
Sensitivity
High Frequency Driver:
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard-
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Rating (IEC)4:
Maximum SPL
Low Frequency Driver: M222-8A 300 mm (12 in) driver with 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
6
(1W, 1m within 111 dB-SPL
operational band):
Nominal Impedance: 8 ohms
Sensitivity6(1W @ 1m) 116 dB-SPL
Waveguides:
Enclosure: Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior
Versions: from direct exposure to the elements. WRX for direct exposure or
Input Connectors: Neutrik Speakon
Dimensions 991 x 673 x 897 mm
Net Weight: 79.5 kg (175 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
LF: 400 W (1600 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs
(AES)3: HF: 75 W (300 W peak), 2 hrs
5
: Bi-amp mode: LF: 137 dB-SPL cont avg (143 dB peak)
Passive mode: 134 dB-SPL cont avg (140 dB peak)
2453H, 38 mm (1.5 in) exit compression driver with 100 mm (4 in)
voice coil
LF: PT-N43MF 600 x 600 mm (24 x 24 in)
HF: PT-H43HF 300 x 300 mm (12 x 12 in)
grade 11-ply Finnish birch plywood.
ware (eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See
WRC/WRX configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, acoustically transparent foam
backing (grille cloth backing on white units)
nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.
WRC or WRX.
HF: 135 dB-SPL cont avg (141 dB peak)
®
NL4, plus CE-compliant covered barrier strip termi-
䉴 PD6212/43 High Output Two-Way Full-Range Loudspeaker
Beamwidth
360
100
Horizontal
-6 dB Beamwidth (degrees)
Directivity Index, Q
Vertical
10
20 100 1000 10000 20000
20
10
Frequency (Hz)
Directivity Index (DI), dB
0
20 100 1000 10000 20000
Frequency (Hz)
Dimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet
285 (11.2)
12.5û
897 (35.3)
To p
100
10
Directivity Factor (Q)
1
Bi-Amp FIR Frequency Response and Raw Impedance
110 316
100
90
SPL (dB)
80
70
20 100 1000 10000 20000
Horizontal Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
- - - - - - - - - HF
---------------------- MF
Frequency (Hz)
Frequency (Hz)
100
31.6
Ohms
10
3.16
Vertical Up Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Frequency (Hz)
Vertical Down Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Measurements obtained in bi-amp mode using FIR filters. Graphs are from
unaltered measured data.
Frequency (Hz)
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
991 (39.0)
673 (26.5)
Front Side Back
Loading...