JBL PD6200/64 User Manual

PD6200/64

Key Features:

䉴

High power 200 mm (8 in) dual-coil CMCD™
Cone Midrange Compression Driver provides
high sensitivity and high continuous SPL
capability along with low distortion, extended
bandwidth and improved phase coherence.

䉴

Large format neodymium HF driver provides
clear, intelligible high frequency projection.

䉴

Large PT™ Progressive Transition™ wave­guides provide consistent 60° x 40° pattern
control, low distortion at high SPL levels and
smooth frequency response.

䉴

Rotatable mid and high frequency wave­guides allow either horizontal or vertical
cabine t orientation.

䉴

Sophisticated, steep-slope passive crossover
network with switchable bi-amp/passive
crossover modes.

Applications:

䉴

Performing arts facilities

䉴

Live theaters

䉴

Auditoriums

䉴

Houses of worship

䉴

Dance clubs

䉴

Sports facilities

PD6200/64 is a Precision Directivity™
60° by 40° mid-high frequency loudspeaker
designed for applications requiring high output
capability with excellent pattern control.

The CMCD-82H cone midrange compression
driver consists of a driver/phasing plug assem­bly providing high output with low distortion.
CMCD-82H’s extended response allows for
smoother transition to the high frequency driver
and the smaller entrance diameter into the
waveguide provides for better pattern control.
The internal 200 mm (8 inch) driver features a
high power Differential Drive
design. The 2432H large format high frequency
compression driver utilizes a neodymium mag­net and aluminum diaphragm to deliver clear
and intelligible high frequency projection,
extended frequency response, and low distor­tion at even the highest drive levels.

Large PT Progressive Transition waveguides
achieve an optimum balance of extremely well
controlled coverage with low distortion, smooth
frequency response, and natural sound charac­ter. The waveguides are rotatable for cabinet
positioning in either horizontal or vertical orien­tation. A high-slope crossover network mini­mizes band overlap and the resulting well-con­trolled off-axis response enhances arrayability.

The loudspeaker can be operated in either bi­amplified or in full passive mode. Input connec­tors include both Speakon
covered barrier strip for hookup versatility. The
cabinet is fitted with twenty M10 threaded sus­pension points, supporting a wide variety of
installation approaches.

PD6200/64 is part of JBL’s broad lineup of
installed sound loudspeakers, complementing
the larger PD700 mid-high cabinets with a more
compact size and supplementing the smaller AE
Series cabinets with higher SPL capability and
larger horns for pattern control to a lower fre­quency.

®

dual voice coil

®

and CE-compliant

High Output Two-Way
Mid/High Frequency
Loudspeaker

Specifications:

Frequency Range1(-10 dB): 200 Hz to 18 kHz

Frequency Response1(±3 dB): 240 Hz to 16 kHz

System Sensitivity (1W @ 1m): Passive Mode: 110 dB-SPL

Transducers:

Physical:

Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use

(H x W x D in vertical orientation): (39.0 x 26.5 x 27.8 in)

1.

In bi-amp mode, with recommended active tuning.

2

Resultant engineered acoustical response of crossover network and components.

3

AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2
hr rating plug long-term 100 hr rating are specified for low-frequency transducers.

4

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

5

Calculated based on power rating and sensitivity, exclusive of power compression.

6

Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.

JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this rea­son, any current JBL product may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.

Coverage Pattern: 60° x 40°

Directivity Factor (Q): 22.4

Directivity Index (DI): 13.5 dB

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover2: 1.5 kHz

Transducer Power Ratings

Long-Term System Power Passive Mode: 300 W (1200 W peak), 100 hrs.

Sensitivity

High Frequency Driver:

Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard-

Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered

Rating (IEC)4:

Maximum SPL

Mid Frequency Driver:

Nominal Impedance: 8 ohms

6

(1W, 1m within 110 dB-SPL

operational band):

Nominal Impedance: 8 ohms

Sensitivity6(1W @ 1m) 116 dB-SPL

Waveguides:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade

Versions: from direct exposure to the elements. WRX for direct exposure or

Input Connectors: Neutrik Speakon

Dimensions 991 x 673 x 706 mm

Net Weight: 58.8 kg (130 lb)

Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.

MF: 350 W (1400 W peak), 100 hrs

(AES)3: HF: 75 W (300 W peak), 2 hrs

5

: Bi-amp mode: MF: 135 dB-SPL cont avg (141 dB peak)

Passive mode: 135 dB-SPL cont avg (141 dB peak)

CMCD–82H cone mid-range compression driver with integral 200 mm
(8 in) diameter Differential Drive®dual voice coil driver

2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in)
voice coil

MF: PT-N64MF-1 600 x 600 mm (24 x 24 in)
HF: PT-H64HF-1 300 x 300 mm (12 x 12 in)

11-ply Finnish birch plywood.

ware (eyebolts NOT included, see optional accessories).

Finish: Black DuraFlex™ finish. White (-WH) available upon request.

extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See
WRC/WRX configuration sheet for details.

Grille: Powder coated 14 gauge perforated steel, acoustically transparent foam

backing (grille cloth backing on white units)

nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.

WRC or WRX.

HF: 135 dB-SPL cont avg (141 dB peak)

®

NL4, plus CE-compliant covered barrier strip termi-

䉴 PD6200/64 High Output Two-Way Mid/High Frequency Loudspeaker

Beamwidth

360

100

Horizontal

-6 dB Beamwidth (degrees)

Directivity Index, Q

Vertical

10

20 100 1000 10000 20000

20

10

Frequency (Hz)

Directivity Index (DI), dB

0

20 100 1000 10000 20000

Frequency (Hz)

Dimensions

Dimensions in mm (in)

For more detailed dimensional information, refer to Application Data Sheet

300 (11.8)

15˚

706 (27.8)

Top

100

10

Directivity Factor (Q)

1

Bi-Amp FIR Frequency Response and Raw Impedance

110 316

100

90

SPL (dB)

80

70

20 100 1000 10000 20000

Horizontal Off-Axis Frequency Response

10

0

-10

Attenuation (dB)

-20

-30
20 100 1000 10000 20000

- - - - - - - - - HF

---------------------- MF

Frequency (Hz)

Frequency (Hz)

100

31.6

Ohms

10

3.16

Vertical Up Off-Axis Frequency Response

10

0

-10

Attenuation (dB)

-20

-30
20 100 1000 10000 20000

Frequency (Hz)

Vertical Down Off-Axis Frequency Response

10

0

-10

Attenuation (dB)

-20

-30
20 100 1000 10000 20000

Measurements obtained in bi-amp mode using FIR filters. Graphs are from
unaltered measured data.

Frequency (Hz)

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

991 (39.0)

673 (26.5)

Front Side Back