JBL PD595 Datasheet
PD595
PRELIMINARY
15” Horn-Loaded Full-Range Loudspeaker System
Features:
380 mm (15”) horn-loaded low-frequency driver
Large PT™ Progressive Transition™ waveguides
provide broad band 90° x 50° pattern control, low
distortion at high SPL levels and smooth frequency
response
Rotatable waveguide allows for either horizontal or
vertical cabinet orientation
Sophisticated, steep-slope passive crossover network
with switchable bi-amp/passive crossover modes
Specications:
Applications:
Sports Facilities
Performance spaces
Auditoriums
Worship facilities
PD595 is a Precision Directivity™ loudspeaker designed
for applications requiring high output capability with
excellent pattern control. PD595 can be utilized in
music or speech systems where frequency extension
to 80 Hz is adequate or combined with subwoofers to
create extended bandwidth fullrange systems.
e 2031H 380 mm (15”) low frequency transducer
features high sensitivity and low power compression for
high continuous SPL capability. It is horn-loaded for
additional sensitivity and improved pattern control. e
2432H 38 mm (1.5”) exit, 75 mm (3”) voice coil high
frequency compression driver utilizes a neodymium
magnet and aluminum diaphragm to deliver clear
and intelligible high frequency projection, extended
frequency response, and low distortion at even the
highest drive levels.
e system is equipped with a large format rotatable PT
waveguide allowing the PD595 to be used in either the
vertical or horizontal orientation.
e loudspeaker can be operated in either biamplied
or in full passive mode. In either case, digital signal
processing is required in order to achieve specied
performance. Input connectivity is achieved via CEcompliant covered barrier strips. e cabinet is tted
with twenty-two M10 threaded suspension points,
supporting a wide variety of installation approaches.
e PD500 Series is part of JBL’s broad lineup of installed
sound loudspeakers, complementing the larger PD6000
Series with a more compact size and supplementing the
smaller AE Series.
Transducers:
Sensitivity (1W, 1m within operational band): 106 dB (avg 300Hz-1.3kHz)
Physical:
Dimensions (H x W x D in vertical orientation): 782.0 x 783.0 x 670.0 mm
Frequency Range¹ (-10 dB):
Frequency Response¹ (±3 dB):
Coverage Pattern:
Directivity Factor (Q): 10
Directivity Index (DI): 10 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover²:
Transducer Power Ratings
System Power Rating (IEC): Passive mode: 500W 2hrs, 300W 100hrs (IEC)
Maximum SPL:
System Sensitivity (1W @ 1m): Passive Mode: 104 dB SPL
Nominal Impedance:
Low Frequency Driver: 2031H 380 mm (15 in) driver with 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm
Nominal Impedance: 8 o hms
Sensitivity (1W @ 1m) 113 dB (avg 1.5k-5kHz)
Waveguide: HF: PT-H95HF-1 300 x 300 mm (12 x 12 in)
Enclosure: Trapezoidal with 10 degree side ang les, 18 mm exterior grade 11-ply
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
Optional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered
Input Connectors: Neutrik Speakon® NL4, plus CE-compliant covered barrier strip termi-
Environmental Specications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use
Net Weight: 69.0 kg (152 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
50Hz to 20kHz
90Hz to 16kHz
90° x 50°
1.3 kHz
LF: 450W 2hrs, 300W 100hrs
(AES):
HF: 75W, 2hrs, 50W 100hrs
Bi-amp: LF: 133 cont (139 peak)
HF: 131 cont (137 peak)
Passive: 131 cont (137 peak)
8 ohms
(3 in) voice coil
Finnish birch plywood.
(eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ nish. White (-WH) available upon request.
from direct exposure to the elements. WRX for direct exposure or
extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See WRC/
WRX conguration sheet for details.
Grille: Powder coated 14 gauge perforated steel, acoustically transparent and
weather resistant cloth backing.
nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.
WRC or WRX.
(30.8 x 30.8 x 26.4 in)
Loading...