Page 1
Application:
The E-System 15, featuring two EON15 G2 powered speakers, a Soundcraft E8 sound reinforcement mixer, and two AKG D2000S dynamic hypercardioid microphones, is a complete, integrated
sound system intended for a wide range of applications in reinforcement of music and speech.
Key Features:
The E-System 15 is just that–a system. From the
top manufacturers in the pro audio industry, each
component has been selected to support and complement the others.
JBL EON15 G2 Speakers
The second generation of one of the most successful and influential professional speaker systems
ever.
15" Differential Drive™ low-frequency driver
with dual neodymium magnet for light weight
and reduced distortion.
1" (throat diameter) JBL compression driver with
1.75" titanium diaphragm and ferro-fluid cooling.
300 watts low-frequency and 100 watts high-frequency (bi-amplified)–actual power delivered to
the drivers.
Built-in 3-input mixer. One balanced mic/line
input, two balanced ¼" phone line-level inputs.
Two-band equalization.
Balanced loop-through/mix output. “Daisychain” additional EON speakers or send the
mixed output to a mixing console.
60° x 90° (nominal) constant directivity horn.
Thermomaster®Total Thermal Management
System
®
. A single piece, cast-aluminum baffle
integrates woofer frame, horn, and amplifier
heat sink. Air movement in the finned ports dissipates heat–no internal or external cooling fans
are required.
Rugged, light-weight, black co-polymer
enclosure.
Integral 35 mm pole mount receptacle with
securing thumb screw.
Multi-angle enclosure for front of house or stage
monitor application.
Tailored dynamic processing protects amplifiers
and speakers from being over-driven without
producing extreme changes in frequency
response as level varies.
Extended low-frequency performance. Delivers
powerful bass to below 40 Hz.
E8 Mixer
8 mic/line input channels
2 stereo input channels
Three-band channel EQ with variable midfrequency for precise tailoring of the sound
Precision, ultra-linear mic pre-amps
Two auxiliary monitor or effects busses with
pre/post settings
True professional +48V phantom power
Smooth 100 mm faders for precise control of
your mix
Individual channel mute switches so you can
mute an input without disturbing your mix
Internal power supply
Simple rack mounting options (sold separately)
D2000S Microphones
Rounding out the system is a pair of AKG D2000S
handheld, dynamic hypercardioid microphones.
These microphones have been selected to do a
great job in a variety of applications from speech
and vocals to instrument pick up.
Complete
Portable Sound
Reinforcement System
Page 2
E-System 15 Complete Sound Reinforcement System
A complete sound reinforcement system so good
that no one company could build it all. Start wih
the second generation of the speaker that started
the powered-speaker revolution–the JBL EON15
G2. Then add a Soundcraft E8 mixer with that great
British sound and wide range of features. To complete the system, a pair of dynamic, hypercardioid
microphones from AKG–the D2000S. Rounding out
the system are four 25 ft XLR cables to hook it all
together.
JBL EON15 G2
Freq. Range (-10 dB) 39 Hz - 18 kHz
Freq. Response (±3 dB) 42 Hz - 17 kHz
Horz. Coverage (-6 dB) 90° Nominal
Vert.Coverage (-6 dB) 60° Nominal
Rated Maximum SPL 129 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D) 686 mm x 430 mm x 444 mm
(27 in x 17 in x 17.5 in)
Net Weight 21 kg (46 lb)
LF Driver Integral frame with one 15"
(380 mm) driver, neodymium
magnet, 2" Differential Drive
voice coil.
HF Driver JBL 2418H-1 1" (throat diame-
ter) compression driver with
1.75" diameter titanium
diaphragm. Ferro-fluid cooled.
Amplifier Power LF 300 watts @ low-frequency
driver impedance.
Amplifier Power HF 100 watts @ high-frequency
driver impedance.
Input 1 Sensitivity -44 dBu to -22 dBu for rated
output (Mic/Line switch in
MIC position)
-12 dBu to +20 dBu for rated
output (Mic/Line switch in
LINE position)
Input 2 & 3 Sensitivity -18 dBu to +20 dBu for rated
output
Output Level +20 dBu (peak), Loop/Mix
switch in MIX position
Output Level +26 dBu (peak), Loop/Mix
switch in MIX position
Audio Connectors
Input 1 XLR/F, balanced
Input 2 & 3 ¼" Phone, balanced (TRS)
Loop/Mix Out XLR/M, balanced
EQ High Frequency Shelving,
±15 dB @ 5 Hz
Low Frequency Shelving,
±15 dB @ 120 Hz
Active Crossover Freq. 1.5 kHz
Limiting Low frequency amplifier con-
trolled by dymanic filter to
prevent amplifier overload
under extreme conditions.
AC Input 110 – 230 VAC, 50 – 60 Hz.,
175 watts rating per UL,
detachable IEC power cabl
e.
EON15 G2 Block Diagram
MIC
SIGNAL
INPUT2
INPUT3
INPUT1
OUT
PEAK
INPUT2
INPUT3
W HIGH
EQ
HPF
INPUT1
300W
100W
SUM
OUT
INPUT1
LINE
MIC
INPUT2
INPUT3
MIC
INPUT1
INPUT2
INPUT3
LOOP
MIX
SIGNAL
SUM
EQ
LOLOW HIGH
PEAK
HPF
LPF
DYNAMIC
FILTER
100W
&
300W
Page 3
Soundcraft E8 Mixer
Input Channels 8 Mic/Line, mono
2 Line, stereo
Aux. Sends 2, globally selectable,
pre/post
Noise (22 Hz-22 kHz measurement bandwidth)
Mic EIN @ max gain, 150Ω
source impedance -128 dBu
Mix @ max, faders down <-85 dBu
Crosstalk (typ. @ 1 kHz)
Channel mute >96 dB
Fader cut-off (rel +10 mark) >96 dB
Aux send pot offness >86 dB
Frequency Response
Mic/Line input to any output +/- 0.5 dB 20 Hz -
20 kHz
THD+ Noise
Mic gain 30 dB, -30 dBu input
Mix out, fader max @ 1 kHz <0.007%
Input & Output Impedance
Mic Input 2.4kΩ
Line Input 11kΩ
Stereo Input 100kΩ
Outputs 75Ω
Input & Output Levels
Mic Input (max. level) +17 dBu
Line Input (max. level) >30 dBu
Stereo Input (max. level) >30 dBu
Mix Input (max. level) >20 dBu
Headphones (@200Ω) 300mW
Size
Weight 6.75 kg (14.88 lb)
Dimensions (HxWxD) 87.58 mm x 426.4 mm x
400.10 mm (3.45 in x
16.79 in x 16.33 in)
Rack Mounting Requires Soundcraft
Part#P-S20001D-01
AKG D2000S Microphone
Type Dynamic microphone
Frequency Range 70 - 20,000 Hz
Polar Pattern Hypercardioid
Sensitivity @ 1000 Hz 2.0 mV/Pa (-54 dBV re
1V/Pa)
Equivalent noise level 20 dB(A) to DIN 45412
Maximum SPL for 1% (3%) THD 140 dB SPL (150 dB SPL)
Electrical impedance <500 ohms
Recommended load impedance >1200 ohms
Connector 3-pin male XLR
Finish Matte black enamel
Size
Length : 181 mm (7.13 in)
Ø: 50 mm (1.97 in)
Weight 8.1 oz (0.9 lb)
System Contents
Item Qty
JBL EON15 G2 Speakers 2
Soundcraft E8 Mixer 1
AKG D2000S Microphones 2
25 ft. (7.6m) XLR/M to XLR/F Cables 4
JBL EON15 G2 User Guide 1
Soundcraft E8 User Guide 1
Page 4
SSE-SYSTEM 15
CRP 10M
5/03
E-System 15 Complete Sound Reinforcement System
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
www.jblpro.com
© Copyright 2003 JBL Professional
A Harman International Company
Available Accessories
SS2-BK Tripod Speaker Stand
ESK15 Suspension Kit for EON15" models (except EON1500)
BRK15 Bracket, adapts EON15" models to OmniMount®brackets
EON15 BAG/N-1 Zippered, plush-lined speaker carrying bag with wheels for EON15" models
EON15 BAG-1 Zippered, plush-lined speaker carrying bag for EON15" models
We are constantly improving our products so these specifications are subject to change without notice.
Soundcraft E8 Block Diagram
Loading...