Page 1
JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
PACKAGE
WIRING DIAGRAM
Technical Manual
JBL EON515XT/230
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• System Power Rating: 625W (525 + 100)
• Frequency Response: 42 Hz – 18 kHz (± 3 dB)
• Frequency Range: 39 Hz – 20kHz (-10 dB)
• Maximum SPL Output: 132 dB
• Mic Input Gain: -Infinity to +40 dBu
• Line Input Gain -Infinity to +4 dBu (+18 dBu maximum
input level)
• Input Impedance: 14k ohms
• Crossover Frequency: 1.7 kHz
SYSTEM COMPONENTS:
• Baffle/Grille Assembly: 445873-001
• Low Frequency 265F-1 380 mm (15 in) Different-
Transducer: ial Drive®integated woofer with dual
2” voice coils
• DC Resistance: 1.35 ohm ±10%
• High Frequency 2414H 37.5 mm (1 in ) annular poly
mer diaphragm, neodymium com-
Transducer: pression driver
• DC Resistance: 3.60 ohm ± 0.2%
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 0.2V Input, 50 Hz to 20 kHz
B. L.F. Aural Sweep Test: 3.5V Input,10 Hz to 300 Hz
C. H.F. Aural Sweep Test: 0.75V Input, 500 Hz to 1.5 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 673 x 406 x 368 mm D
(26.5 x 16 x 14.5 in D)
• Shipping Weight: 42.5 lbs. (19.2 kg)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Amplifier Assembly
Wire Harness Assembly
364836-001
Driver, High Freq
2414H
(342423-002X)
(SEE SCHEMATIC PAGE)
Driver, Low Freq.
265F-1
(363837-001X)
Cone Repl
C2R265-1
Warranty 59660
Owners Manual
445387-002
-
+
-
+
Filler, Side (2)
445385-001
Fillers, Top & Bottom (2)
44538-001
Bag
322591-001
19 x 16 x 42 LG
Outer Carton
445389-001
Carton
445386-001
Cord, AC, Line CEE 7/7
425-00000-00 120V
425-00000-01 230V
BLU/BLK
BLU
GRN/BLK
GRN
07-14
JBL EON515XT/230 REV F
Page 2
JBL EON515XT/230
JBL EON515XT/230
SCHEMATIC ( Wire Harness)
364836-001
Page 3
COMPONENT EXPLODED VIEW
JBL EON515XT/230
Screw
813-21300-10
M3 .5X 10MM
RND, PH, CLR,
ZINC LCS
Rubber Foot (2)
364802-001
Fly Bolt (4)
364616-001
Nut (4)
838-00800-00
M14,REG,CLR ZINC,RH
Washer (4)
848-00100-02
M14,REG, CLR ZINC
Driver, Low Freq.
265F-1
(363837-001X)
Cone Repl
C2R265-1
Screw (8)
365626-001
M5 PTx25MM
FIL,PH,BLK,ZINC,
Thumbscrew
364983-001
Insert
365433-001
M6 x 12MM,PPB,TYPE
Handle Pocket Assembly (2)
365135-002
Screw (4)
365627-001
M4 X 25MM
FIL,PH,BLK, WASHER HD
Amp Board
140296-6JBL (120/230)
500988 (only for 230V)
Input Module
445548-001
A/C Inlet PCB
365428-001
(includes fuse)
Interface PCB
138927-1_4JBL
Amplifier Gasket (2)
364821-001
Screw (12)
813-41300-15
M3 .5X 15MM
PAN,PH,CLR ZINC,LCS
Wire Harness
364836-001
Heat Sink is par t of
the complee amplfier
assemby (not avail.
seperately)
Input Plate
445279-001
Logo, Heat Sink
364678-001
Cover Badge, Heat Sink
364679-001
Clip, MRX IGBT
138556-1JBL
Clip, EON 515 to -220
140323-1JBL
Silipad, EON515
140324-2JBL
Silipad, EON515 GBT
140326-1JBL
Clip, MRX
138822-1JBL
Sound Dampener (3)
365625-001
Cover,Fly Bolt (2)
364805-001
Upper Handle
364654-001
Enclosure Assembly
EON515XT/230
(Not Available for Sale)
Gasket,Enclosure
364835-001
Driver,High Freq.
2414H
(342423-002X)
Screw (10)
365270-001
M4 x .65
Washer (10)
365156-001
Rubber
Screw (33)
862-41410-10
6 x 5/8
PAN,PH,HIGHLO,
BLK ZINC,LCS
Screw (4)
814-41300-06
M4 x 6MM
PAN,PHILLIPS CLEAR,
ZINC
Screw (2)
365435-001
M4 x 5MM
TREAD CUTTING
Amplifier
Sheild
365107-001
JBL EON515XT/230
Logo Badge
445332-001
(includes the
logo terminal
plate)
Screw (4)
365628-001
(SM Handle)
Cup Plug
365462-001
Logo Terminal
Plate Assembly
365170-001
Stickers (2)
445554-001
EON Hexoganal
Baffle / Grille
Assembly
445873-001
Please note: grille
assembly is not
available seperately
Waher, Transistor output IC
5047029
Loading...