Applications:
c
Live sound reinforcement, speech and
vocals, music playback in entertainment,
A/V, and institutional venues – especially
when ease of use and portability are
important factors.
c
Amplification and monitoring for electronic
musical instruments.
c
Everywhere you need to be heard.
Features:
c
280 watt Powered Speaker System
c
Light Weight. True portability weighing only
15.9 kg (35 lb)
c
Multiple handles for easy transport
c
15" JBL low-frequency driver
c
1" throat diameter next generation JBL
neodymium compression driver
c
Efficient Class-D digital amplifier technology
c
100° H x 60° V asymmetrical wave guide for
uniform audience coverage
c
Line level and direct microphone input
capability
c
Selectable Pre-engineered EQ settings
c
Loop thru signal flow for extended system
application and easy “daisy-chain”
connections
c
Integrated M10 suspension points for easy
rigging
c
Multi angle enclosure for main or monitor
applications
c
Integrated 36 mm pole mount socket with
stabilizing securing screw
c
Highly designed composite enclosures for
durability, lightweight, and acoustic
performance
The EON315 is a 15-inch, two-way,
powered, portable speaker system. It is a
complete self contained sound reinforcement
system, capable of full-bandwidth reproduction
at high levels with the added benefit of a
microphone pre-amp enabling the direct
connection of a dynamic microphone. The
EON315 is comprised of a 380 mm (15 in) JBL
woofer, a 25.4 mm (1 in) neodymium high
frequency compression driver coupled to a
100° H by 60° V waveguide. Both components
are driven by the discrete channels of a 280
watt Class-D integrated power amplifier. The
input section contains all cross-over functions,
protection, and system EQ functionality.
The input panel offers XLR or ¼-inch TRS
phone jack compatibility. Selectable input
sensitivities allow a broad range of devices to
be properly matched, from the output of a
mixer to an mp3 player or a dynamic
microphone. A balanced XLR loop through
output connector enables the simple ‘daisy
chaining’ of additional EON systems if more
coverage and level is required. Pre-engineered
system EQs allow for matching the settings to
the actual source material. In the “cut” position
maximum level can be achieved for speech
reproduction by reducing need to reinforce the
lower frequencies. This is also a typical setting
when using the system as a floor monitor,
reducing low frequency build-up which occurs
naturally when placed on a floor. The “flat”
setting is ideal for live music and the “boost”
for reproducing low level pre-recorded music, delivering extra low and high frequency energy.
The signal present and limit lights indicate performance status.
In addition to acoustic performance the EON315 features three full size deep-well handles,
light weight, and balanced ergonomics. The new generation of EON products offers true
portability and ease of handling. Five standard M10 rigging points and integrated pole mount
socket increase the system’s utility. The extremely rugged copolymer enclosure has been
designed for main and 45° monitor orientation in the left and right hand configuration. A full
screen-backed steel grille offers additional protection for both the woofer and compression
driver components.
Specifications:
System Type: Self powered 15", two-way, bass-reflex design
Frequency Range (-10 dB): 38 Hz - 20 kHz (EQ in ‘Flat’ position)
Frequency Response (±3 dB): 50 Hz - 18 kHz (EQ in ‘Flat’ position)
Coverage Pattern: 100° H x 60° V nominal
Directivity Index (DI): 9 dB
Directivity Factor (Q): 8
Crossover Frequency: 1.8 kHz
System Power Rating: 280 W continuous, 560 W peak
LF Power amp: 220 W continuous at driver impedance
HF Power amp: 60 W continuous at driver impedance
Distortion: Less than 0.1% at rated power
Maximum SPL: 127 dB
Signal indicators: Limit: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Mic/Line: Red LED indicator
Input Gain: Mic position: -Infinity to +40 dB
Line position: -Infinity to +4 dB (+20 dBu Max signal input)
Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
HF +2.5 dB Shelving Filter @ 4 kHz
Low Cut Filter: Preset high pass @ 120 Hz
LF Driver: 1 x M115-2 380 mm (15 in)
HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) polymer diaphragm, neodymium
compression driver
Input connector: Balanced XLR / ¼ inch TRS combo jack.
Output connector: Balanced male XLR, +20 dBu (peak) o/p level
XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Limiting/Protection: Dynamic Limiter
Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
Handles: One left/right side, one on top
Suspension / Mounting: 36 mm pole socket with stabilizing screw, 4 x M10 suspension
points, 1 x M10 pull-back point.
Grille: Powder coated perforated steel with acoustically transparent
black screen backing.
AC input: 120 – 240 V, 50/60 Hz
Dimensions (H x W x D): 685 mm x 438 mm x 366 mm (27 in x 17.3 in x 14.4 in)
Net Weight: 15.9 kg (35 lb)
JBL continually engages in re s e a rch related to product improvement. Some materials, production methods and design
re finements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
Portable Self-Powered
15", Two-Way,
Bass-Reflex Design
Professional Series
E O N 3 1 5
䉴 EON315 Portable Self-Powered 15", Two-Way, Bass-Reflex Design
On Axis Frequency Response
100
90
80
SPL (dB)
70
60
20 100 1000 10000 20000
Frequency (Hz)
Input Panel
Block Diagram
OUT
INPUT
LINE
MIC
LEVEL
MIC
LIMIT
SIGNAL
EQ
BOOST
FLAT
CUT
HPF
LPF
HF
LF
Dimensions
27.0
(685)
17.3
(438)
Dimensions in inches (mm)
14.4
(366)
8.6
(219)
13.5
(343)
7.4
6.8
(188)
(172)
(219)
13.4
(341)
8.6
3.8
(97)
14.5
(367)
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
© Copyright 2008 JBL Professional
www.jblpro.com
6.5
(164)
4.5
(114)
12.8
(324)
17.3
(438)
SSEON315
CRP 5M
09/08
Loading...