JBL CVIW50 User Manual
REMOVING THE GRILLE
If it is necessary to remove the grille after installation, in order to avoid scratching the grille
or frame, you may unfold a paper clip, insert the straight end through one of the holes
in the grille, and gently pull up.
.
NEW CONSTRUCTION
You will need to purchase the CVRIF50 rough-in frame kit.
Detailed installation instructions are supplied with the rough-in kit
SPECIFICATIONS
Plate Size (W X H)
10” X 28-1/8” (254mm X 714mm)
Mounting Cutout Size
(W X H)
8-5/8” X 26-13/16” (219mm X 681mm)
All features and specifications are subject to
change without notice.
OWNER’S GUIDE
PRO DUCT L INE:
JBLCinema Vision
MOD EL:
CVIW50
4
Mounting depth
3-7/8” (98mm)
Weight with CVSAT50
or CVCEN50 attached
12 lbs (5.5 kg)
Declaration of Conformity
We, Harma n Co nsume r In ternation al
2, rou te de Tou rs
72 500 Chate au-d u-Loir
Fr ance
decl are i n ow n res pons ibility t hat the p rodu cts d escr ibed in t his
owne r’s m anua l are in complianc e with te chni cal s tand ards:
EN 6 1000- 6-3: 2001
EN 6 1000- 6-1: 2001
Gary Mar dell
Harman C onsumer I nternatio nal
Chateau- du-Loir, France 4/ 04
PRO SOUND
COMES HOME
JBL Consu mer P rod ucts
250 Cross ways Par k Dr ive, Woodbu ry, N Y 11 797
TM
850 0 Balb oa Bo ule vard , Nor thridg e, CA 913 28
516 .255.4 JBL ( 452 5) W WW.jb l.com
NOTE: For new-con struction a pplica tions, be sure
to pur chase the C VRIF50 roug h-in f rame ki t.
C
2005 H arman Inter national In dusrti es, Inc orporated
JBL is a register ed trademar k of H arman I nternationa l
Indust ries, Incor porated.
Part N o. 4006 - 0 00 - 05200.
A Harm an Internat ional Compa ny
R
TM
JBL CINEMA VISION
CVIW50
INSTALLATION MANUAL
INCLUDED
TM
Template/paint shield
One inwall
adaptor frame
One inwall
adaptor grille
(punch out at perforation).
Self-adhesive JBL logo
for placement on
metal mesh grille
Two speaker
attachment braces
8 small bolts
PAINTING THE CVIW50
FRAME & GRILLE
JBl CVIW50 can be painted
to match any decor. If you wish
to change its color, the satin
finish on the grille and frame
will function as a primer coat.
If CVIW50 is to be painted,
please do it before assembling
a CVSAT50 or CVCEN50
onto this adaptor.
Before painting, install the
paint shield (in the assembly
kit) securely into the recess
in the baffle. This will protect
the speaker components
and baffle from paint residue.
Use a high-quality spray
paint, and apply a thin coat
of color.
ASSEMBLING A CVSAT50 OR
CVCEN50 ONTO CVIW50
5
1
Be certain the grille
perforations remain free
of paint. Filling them
with paint will diminish
the sound quality.
NOTE: Gently remove the
acoustical foam blanket from
the grille before painting.
Reattach the blanket after the
paint has dried.
2
3
7
INSTALLATION
The JBL Cinema Vision in-wall adaptors were designed to be easily installed.
However, if you are unsure of your ability to properly install these assemblies,
please contact your dealer or a qualified installer.
Tools Needed
Pencil
Measuring tape
Phillips #2 screwdriver
Awl
Utility knife
Carpenter’s level
EXISTING CONSTRUCTION
Level
³1/2"
³1/2"
Template
1. Mount CVSAT50 or CVCEN50
loudspeaker to CVIW50
adaptor as instructed earlier
in this installation guide.
4
Determine the correct speaker
location. Note: Remove the inner
template, which is the paint shield,
at the perforation. Also remove the
other perforation from the cardbord
part until you are left with a cardboard frame. Confirm that this cardboard frame comfortably fits on the
back of the CVIW50 frame. This will
be the opening size of your
installation cutout in the drywall.
Although the adaptor may be oriented
either horizontally or vertically, the
installation procedure is the same.
NOTE: always allow at least
one-half inch between a wall
stud and the speaker cutout
or the locking tabs will not be
able to swivel into place.
³1/2"
3
6
5
Note: If the CVIW50 frame and/or grille are to be painted, please do it before
assembling the loudspeaker onto the CVIW50.
4
2. Cut the drywall.
Connect the speaker wires
to the speaker.
Place the frame assembly
in the wall.
1. Place the frame (1) on a flat surface. Use a non abrasive surface as to
not damage the finish of the frame.
2. Position the CVSAT50 or CVCEN50 loudspeaker (2) on the frame (1).
The four pins on the CVIW50 frame (5) should be inserted into the four
grille-pin holes on the loudspeaker baffle.
3. Position each of the two braces (3) on the back of the loudspeaker (2)
enclosure, and securely attach brace (3) to frame (1) using 4 small bolts
(4) per frame.
4. Remove mounting bracket (7) and store bracket and screws for possible
future use.
5. Do not attach grille (6) until after the assembly is installed in a wall.
3. Screw down each of the 8 phillips
head screws. The locking tabs will
swivel into place and will secure the
unit to the rear surface of the drywall.
2
Replace the metal grille. Attach
the JBL logo to the grille to
correspond to vertical or
horizontal installation.
3
Loading...