JBL CSX-F35/64 VTX_F35-64_Specsheet_5119927-00A.pdf

Download

Page 1

VTX SERIES | F35/64

High Performance Dual 15” 3-Way Loudspeaker

HIGHLIGHTS

PERFORMANCE

High output 3-way enclosure featuring the D2 Dual Diaphragm

Dual Voice Coil high-frequency compression driver in a light-

weight trapezoidal enclosure.

JBL TRANSDUCERS

Differential Drive™, Dual Neodymium Magnet, Dual Voice Coil,

Direct Cooled™ MF and LF cone transducers.

VERSATILE

Multiple M10 attachment points facilitate a variety of suspension

options. Rotatable mid-hi waveguide for use in either vertical or

horizontal orientation. Included front-face dolly for easy transpor-

tation.

SPECS

The VTX F35 was designed to address a wide range of applications where high-impact, high-ﬁdelity audio needs to be delivered with the

form factor of a trapezoidal full-range system. The F35 is the go-to choice for customers needing high-power side-ﬁlls, mains speakers,

or a high-performance point-source solution to complement to larger VTX system systems. This system has an exceptional power-to-

weight ratio thanks to its lightweight, Differential Drive 15” and 8” transducers, and beneﬁts from proven JBL technologies, including

a multi-band Progressive Transition Waveguide and the high-performance D2 high-frequency driver. The F35 ships with a detachable

front-face dolly-board as standard and it is available in 60x40 or 90x50 coverage patterns. The cabinet is equally suitable for stackable

and suspendable conﬁgurations thanks to the integrated M10 mounting points. The F35 is acoustically compatible with all other VTX

Series systems, and it’s truly a ﬂexible design that delivers uncompromising performance in a compact package.

KEY MESSAGES

PROGRESSIVE TRANSITION™ (PT) WAVEGUIDES

The F35 Progressive Transition Waveguides provide excellent cover-

age control and are rotatable so the loudspeaker system can be used

in either the vertical or horizontal orientation. The distinctive feature

of PT Waveguides is the lack of a traditional diffraction slot. Instead,

the sidewalls transition smoothly from the driver’s throat through to

the rectangular mounting ﬂange. This translates to optimal frequency

response superbly low distortion. The beamwidth and directivity are

optimal in the horizontal plane while the vertical beamwidth was op-

timized to match with F35 low frequency and midrange transducers.

4-CHANNEL, 3-WAY DESIGN

The VTX F35 features a full 3-way design and utilizing 4-channels of

ampliﬁcation and DSP. The F35 was design to work best with Crown

Audio I-Tech 4x3500HD ampliﬁer and up to three cabinets can be

connected to one ampliﬁer.

DIFFERENTIAL DRIVE® TRANSDUCERS

Differential Drive transducers are using a creative reconﬁgu-

ration of the basic elements of the low-frequency driver. Heat

sinks are integrated into the driver’s cast aluminum frame, and

the neodymium magnets are placed inside the driver’s dual

voice coil assembly, completing the magnetic circuit without

the heavy surrounding steel structure of conventional drivers.

While dramatically reducing driver weight, all critical perfor-

mance parameters are greatly enhanced: frequency response,

power output and distortion. The resulting sound quality is ex-

traordinarily transparent, even at very high SPL, while system

weight and physical footprint can be reduced by as much as

half when compared to conventional speaker systems. JBL’s

Differential Drive technology is now at the core of all VTX Se-

ries loudspeakers from the large format Line Arrays to the VTX

F35 and compact stage monitors.

Page 2

TECHNICAL SPECIFICATIONS

SYSTEM

Frequency Range (-10 dB):

39Hz - 18kHz (Preset: VTX F35/64)

VTX SERIES | F35

SPECS

Coverage Pattern (-6dB)

Horizontal:

Vertical:

System Input Power Rating

LF : MF:

HF:

Maximum Peak Output²:

System Ampliﬁcation:

Required Ampliﬁer Channels:

Number of Cabinets per Circuit:

System Impedance

LF :

MF :

HF :

TRANSDUCERS

Low Frequency :

60 degrees nominal 40 degrees nominal

2 x 800W Continuous (IEC/100 hour) 270W Continuous (IEC/100 hour) 100W Continuous (IEC/100 hour)

143dB (Preset: VTX F35/64)

Crown Audio I-Tech HD (all models) Crown Audio I-Tech 4x3500HD

4-Channels Quad-Amp (LF/LF/MF/HF)

3 x VTX F35

2 x 8 ohms 8 ohms 8 ohms

2 x 2265H, 254 mm (15 in) diameter, dual 76 mm (3 in) diameter voice coil, NDD ®, Direct Cooled ™

Mid Frequency :

High Frequency :

1 x 2169H, 203 mm (8 in) dia., 76mm (3 in) Dual Voice Coil, Neodymium Differential Drive®, Direct Cooled™

1 x D2430H, D2 dual diaphragm, dual 76mm (3 in) diameter voice coil

ENCLOSURE

Construction :

Suspension :

18 mm, 11-ply Baltic birch plywood; black DuraFlex™ ﬁnish; integral recessed handles

Integrated M10 mounting points

Powder Coated 14 gauge hex-perforated steel with acoustically-transparent black cloth backing

Grill :

Connectors

Neutrik® SpeakON® NL-8 (2x)

Type :

Pin Assignments :

Dimensions (H x W x D) :

Pins 1 ± (LF), Pins 2 ± (LF), Pins 3 ± (MF), Pins 4 ± (HF)

1052.8 mm x 596.3 mm x 527.9 mm (41.4 in x 22.4 in x 20.8 in)

Net Weight :

Footnotes:

1: IEC Standard: IEC shaped noise with 6dB crest factor based on nominal impedance and a duration of 100 hours. Continuous is deﬁned as 2x RMS. 2: Peak, unweighted SPL, measured under full-space conditions at 1 meter using broadband pink noise with a 12dB crest factor and speciﬁed preset.

JBL continually engages in research related to product improvement. Some materials, production methods and design reﬁnements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design speciﬁcations unless otherwise stated.

52.6 kg (116 lbs)

Page 3

ACOUSTIC MEASUREMENTS

20 100 1000 10000 20000

110

SPL (dB)

Frequency (Hz)

360

-6 dB Beamwidth (degrees)

FREQUENCY RESPONSE BEAMWIDTH

100

VTX SERIES | F35

SPECS

DIMENSIONS

Horizontal

Vertical

20 100 1000 10000 20000

596.3mm | 22.42” 527.9mm | 20.79”

1052.8mm | 41.45”