JBL CSS8004, CSS8018 User Manual

CSS8004/CSS8008/

100 mm (4 in) and 200 mm (8 in)
Commercial Series Ceiling Speakers for

CSS8018

With CSS-BB4 and CSS-BB8 Backcans and CSS-TR4/8 Tile Rails

Commercial Series

Key Features:

䉴 Affordably priced, high-quality dual-

cone type ceiling speaker.

䉴 Pre-assembled speaker / transformer

/ grille assembly.

䉴 Suitable for most paging or

background music applications,
including retail stores, restaurants,
schools, and other facilities.

䉴 Very high sensitivity provides

maximum sound levels using
minimal amplifier power.

䉴 Quality triple-voltage transformer

(100V, 70V and 25V).

䉴 Packs of six pieces contain

individually packaged speakers for
shipping non-pack quantities to
jobsite.

JBL’s Commercial Series Ceiling
Speakers provide excellent
performance for paging and
background music applications. High
sensitivity across the product line
provides maximum sound level, even
at low tap settings.

Model CSS8004 is a 100 mm (4 in)
speaker with 90 dB sensitivity and a
5-Watt multi-tap transformer.

Model CSS8008 is an 200 mm (8 in)
speaker with high 96 dB sensitivity,
greater bass extension than the
CSS8004, and a 5-Watt multi-tap
transformer.

Model CSS8018 is a higher-power
200 mm (8 in) speaker, with very high
97 dB sensitivity and a larger 10-Watt
multi-tap transformer.

The speaker’s pre-attached triple­voltage transformer provides versatility
by allowing use on 100V, 70V or 25V
distributed loudspeaker lines.

The drivers feature a full 25 mm
(1 in) diameter voice coil with a
Kapton coil-former and high­temperature wire for better power
dissipation and long-term reliability.
For installation convenience, the
speaker grille and transformer are pre­attached to the driver. Grilles are
painted, zinc-plated, cold-rolled steel.
The 200 mm (8 in) models feature a
standard 286 mm (11¼ in) bolt­mounting diameter. Matching CSS
backcans are made of zinc-plated steel
with powder-coated finish. CSS steel
pre-install backcans can be installed,
wired, and inspected prior to
installation of the speaker.

Use with Pre-Install-Type Backcans.

Loudspeaker Assemblies:

Driver Size (dual-cone) 100 mm (4 in) 200 mm (8 in) 200 mm (8 in)

Driver Sensitivity (mid-range) 90 dB 96 dB 97 dB
(1W [2.83V], 1m, 2k – 6k Hz)

Frequency Range (-10 dB)

Driver/Grille Assembly: 85 Hz – 18 kHz 55 Hz – 16 kHz 50 Hz – 17 kHz

Installed in CSS-BB backcan: 130 Hz – 18 kHz 100 Hz – 16 kHz 90 Hz – 17 kHz

Driver Continuous Power Handling

Bolt Mounting Circle to Backcan 4 points on 165 mm 4 points on 286 mm 4 points on 286 mm

1

Continuous Pink Noise Rating (IEC-shaped pink noise with a 6 dB crest factor, for 100 hrs continuously), 2.83V input
level.

JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
exceed the original design specifications unless otherwise stated.

Coverage (2 kHz) 175° 120° 110°

Transformer Insertion Loss 1.5 dB Maximum 1.5 dB Maximum 1.5 dB Maximum

Transformer Connection Bare wire Bare wire Bare wire

Safety Agency Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when

Matching CSS Backcan CSS-BB4 CSS-BB8 (0.15 cu ft) CSS-BB8 (0.15 cu ft)

Other Compatible Backcans n/a MTC-81BB8 (0.26 cu ft) MTC-81BB8 (0.26 cu ft)

Cutout Diameter

In CSS-BB backcan 170 mm (6.7 in) 295 mm (11.7 in) 295 mm (11.7 in)

Depth (behind grille) 94 mm (3.7 in) 71 mm (2.8 in) 73 mm (2.9 in)

Grille Diameter 198 mm (7.8 in) 327 mm (12.9 in) 327 mm (12.9 in)

Net Weight (ea) 0.90 kg (1.0 lb) 1.27 kg (2.8 lb) 1.58 kg (3.5 lb)

Shipping Weight (ea) 1.26 kg (2.8 lb) 1.94 kg (4.3 lb) 2.25 kg (5.0 lb)

Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer

1

100V Taps 5W, 2.5W, 1.3W 5W, 2.5W, 1.3W 10W, 5W, 2.5W

70V Taps 5W, 2.5W, 1.3W, 0.7W 5W, 2.5W, 1.3W, 0.7W 10W, 5W, 2.5W, 1.3W
25V Taps 5W, 2.5W, 1.3W, 0.7W 5W, 2.5W, 1.3W, 0.7W 10W, 5W, 2.5W, 1.3W

Motor Mass 200 g (7 oz) 200 g (7 oz) 283 g (10 oz)

Open-back: 125 mm (5.0 in) 216 mm (8.5 in) 216 mm (8.5 in)

CSS8004 CSS8008 CSS8018

15 Watts 15 Watts 20 Watts

installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker.

Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.

MTC-200BB6 (0.5 cu ft) MTC-200BB6 (0.5 cu ft)
MTC-300BB8 (1.0 cu ft) MTC-300BB8 (1.0 cu ft)

(6.5 in) diameter (11.25 in) diameter (11.25 in) diameter

assembly to corresponding backcan.

䉴 CSS8004/CSS8008/CSS8018 Commercial Series Ceiling Speakers

Backcans & Tile Rails

Compatibility CSS-8004 speaker, CSS-8008 and CSS-8018 CSS-BB4 and CSS-BB8

Dimensions 89 deep x 214 diameter mm 108 deep x 334 diameter mm 600 x 36 x 8 mm

Bolt Mount Circle 4 points on 165 mm 4 points on 286 mm n/a

Air Space 1.4 liters (0.05 cu ft) 4.0 liters (0.15 cu ft) n/a

Material Steel, zinc-plated, Steel, zinc-plated, Punched/formed steel,

Conduit Knockouts Five (5) knockouts: Five (5) knockouts: n/a

Attachment Points 4 points on 165 mm (6.5 in) 4 points on 286 mm (11.25 in) 2 points screw onto

Safety Agency Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when

Net Weight (ea) 0.38 kg (0.9 lb) 0.87 kg (2.0 lb) 0.18 kg (0.4 lb)

Shipping Weight (ea) 0.47 kg (1.1 lb) 1.04 kg (2.3 lb) 0.21 kg (0.5 lb)

Included Accessories 4 pcs M4 x 8 mm machine screws for attaching

CSS-BB4 CSS-BB8 CSS-TR4/8

CSS-TR4/8 tile rails speakers, CSS-TR4/8 tile rails backcans

(3.5 x 8.4 in) (4.3 x 13.2 in) (23.6 x 1.4 x 0.3 in)

(6.5 in) diameter (11.25 in) diameter

powder-coated powder-coated zinc-plated

4 on sides spaced at 90° and 4 on sides spaced at 90° and

1 at center of top panel 1 at center of top panel

diameter with clip nuts diameter. Clip nuts for 4 screws. backcan, each rail.

for 4 screws.

installed with corresponding UL Listed loudspeaker, above. S7232/UL Listed, Signaling

Speaker. CUL Listed. In accordance with IEC60849/EN60849.

two tiles rails to backcan

(M4 x 8 mm machine

screws for attaching rails

are packaged with backcans)

Frequency Response & Impedance

Transformer bypassed, 10° off-axis (typical for coverage
area), driver/grille assembly

CSS8004

CSS8008

Connection:

CSS8004 and CSS8008

Orange Green Gray Yellow Black

25V 0.7W 1.3W 2.5W 5W COM

White Blue Brown Orange Black

70V 0.7W 1.3W 2.5W 5W COM
100V 1.3W 2.5W 5W N/C COM

CSS8018

Orange Green Gray Yellow Black

25V 1.3W 2.5W 5W 10W COM

White Blue Brown Orange Black

70V 1.3W 2.5W 5W 10W COM
100V 2.5W 5W 10W N/C COM

CSS8018