JBL CSS8008 SPECIFICATIONS

JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.

JBL CSS8008 REV A

PACKAGE COMPONENT EXPLODED VIEW

01-11

Technical Manual

JB L CSS8008

SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS:

• Nominal Impedance: 8 Ohms

• Driver Power Handling: 15W

• Frequency Range (- 10 dB): Driver/Grille Assembly: 55 Hz - 16 kHz Installed in CSS-BB BACKCAN: 100 Hz - 16 kHz

• Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz):96 dB

SYSTEM COMPONENTS:

• Transducer: 200 mm (8 in) speaker, 25 mm (1 in)

diameter voice coil with a Kapton™ coil-former

• DC Resistance: 7.6 ohm

AURAL SWEEP TEST SPECIFICATIONS:

System Aural Sweep Test:

25V Input (2.5w Tap), 50 Hz to 18 kHz

PHYSICAL SPECIFICATIONS:

• Net Weight (ea): 2.8 lb (1.27 kg.)

WARRANTY INFORMATION:

• Refer to Warranty Statement packed with each product.

• Transformer Taps:

Warranty Card 59660

Instruction Sheet 445681-001

Carton 445684-001

Inner Carton 445683-001

Inside Carton Wrap Liner 455682-001

Main PE Bag 445674-001

Orange Green Gray Yellow Black

25V 0.7W 1.3W 2.5W 5W COM

White Blue Brown Orange Black

70V 0.7W 1.3W 2.5W 5W COM

100V 1.3W 2.5W 5W N/C COM

Screw (2) 882-31910-10 6 x 3/4 PH,WOOD,BLK ZINC

Transformer 444966-001 5W

Nut (6) 445670-001 M4

Washer (4) 445669-001 M4 Non-Slip

Driver 444964-001

Grille 444960-001

Screw (4) 882-31410-40 6 x 2 1/2 PH,WOOD, ZINC

Accessory Bag 445675-001

CSS8008 INSTALLATION INSTRUCTIONS

Commercial Series Ceiling Speaker

1. Install according to diagram.

2. Connect leads according to Tap Wiring chart.

3. Cut off bare portion of unused leads and

Note: Always install in accordance with applicable electrical and building codes.

Tap Wiring:

Orange Green Gray Yellow Black

25V 0.7W 1.3W 2.5W 5W COM

70V 0.7W 1.3W 2.5W 5W COM 100V 1.3W 2.5W 5W N/C COM

terminate with wire nuts.

White

JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.

Blue Brown Orange Black

Tile Rails CSS-TR4/8 (x2)

Secure to ceiling/grids in manner required by local building code.

Back Can CSS-BB8

Back Can / Tile Rail screws (machine screws) M4 x 8 mm (4 places, packaged with back can)

Install screw through thru-hole in back can, and screw into tile rail.

CSS8008 Speaker

Speaker screws (sheet metal screws) M4 x 40 mm (4 places, packaged with speaker)

Install screw through thru-hole in speaker, screw into clip nut in back can

Ceiling Material

CSS8008 Instr 06/10