Jaypro Sports BBC-SPRTKT User Manual

--- BBC-SPRTKT ---

(Cable Supported Tunnel Kit)

Installation Instructions

Call Jaypro Sports Equipment at 1-800-243-0533 during

regular business hours for technical support.

www.jaypro.com

Rev-B Page 1 of 8

JAYPRO SPORTS

BBC-SPRTKT, INDOOR CABLE SUPPORTED BATTING TUNNEL KIT

IMPORTANT NOTICE:

1) DO NOT SET CAGE OR NET TOO CLOSE TO WALLS, COLUMNS, CEILINGS OR

ANY SOLID OBJECT WHERE BALLS CAN STRIKE AND BOUND BACK. CAGE OR
NET SHOULD BE AT LEAST 4 FEET FROM ALL BYSTANDERS, CEILINGS, WALLS
OR SOLID OBJECTS.

2) SPECTATORS MUST NOT STAND IN BACK OR NEAR SIDES OF CAGE OR NET

WHILE BEING USED FOR BATTING PRACTICE.

3) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE HAZARDOUS

AND RESULT IN INJURY. FOR REPAIR OR REPLACEMENT, CONTACT YOUR
DEALER OR JAYPRO SPORTS.

4) CAUTION: DO NOT OVER TIGHT THE CABLES, AS EXTREME LOADING WILL BE

PLACED ON THE WALL OR END STRUCTURE.

PRODUCT DESCRIPTION:

The BBC-SPRTKT, cable supported batting tunnel kit is designed to attach to your existing building
structure, whether steel I-beam columns or reinforced (blocked) studded walls. 9/16” holes will

need to be drilled for the ½” eyebolts. If attaching to standard CMU block or concrete filled walls it

is recommended that a wood stringer wall mounting kit be used (model number BBC-WLKT), which
can be purchased separately. This kit includes six (6) attractive polyurethane finished 24” long, 2” x

8” stringers and mounting plates that are easy to install and help spread the load across multiple

CMU blocks or other wall types.

The height of the cables should be set about 12” below the height of the netting itself. This will

allow about 12” of netting the lay on the floor to capture the ball. The center cable should be placed

about 6” higher than the outer cables.

To maximize your overhead clearance when the net is out of the way and stored against the wall, a
cable suspension kit is available that will suspend the net up to 20 ft below the support cables (model
number BBC-CSTK).

Rev-B Page 2 of 8

ITEM

DESCRIPTION

BBC-SPRTKT

1

1/4" GALVANIZED AIRCRAFT CABLE x 100 FT

3

2

1/2" x 6" STEEL EYEBOLTS, ZP

6

3

1/2" x 12" GALV. STEEL TURNBUCKLE, JAW TO JAW

3

4

3/8" QUICK LINK

3

5

1/4" THIMBLES

6

6

1/4" CABLE CLAMPS

12

7

1/4" x 2 3/8" SNAP HOOK

213

8

1/2-13 HEX NUT

6

9

1/2 FLAT WASHER

12

10

1/2 ID SPLIT LOCK WASHER

6

QTY

TOOLS REQUIRED:

(1) Nut Driver Set
(1) Box Wrench Set
(1) Electric drill w/ Phillips head
(1) Bolt Cutters
(1 or 2) 16 FT Stepladder(s)

 Unpack all parts and check against parts list to ensure that all have been included.
 Inspect all parts for damage. Report any damages to the trucking company.

ASSEMBLY INSTRUCTIONS

Rev-B Page 3 of 8