Jam s HX-EP320 User Manual

32

HX-EP320

USER GUIDE AND

WARRANTY INFORMATION

11

HEY THERE!

Thank you for purchasing
the JAM TRANSIT EVO
BUDS. Check out the
sections below for all the
important information
about your new earbuds.

You’ve got questions? We’ve got answers.

Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-EP320)

Register your earbuds! Information about where
you bought it and how you’re using it is like
gold for the people who make these earbuds.

www.jamaudio.com/customer-support/product-registration

17

JUST CHARGE IT

Charging the earbuds is so easy you’ve probably figured it out by now, but in case you’ve got two options, you can charge it using
your computer or a wall outlet. The Transit Evo Buds need about 2.5 hours for up to 7 hours of play time.

1. The cord that came with the earbuds — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.

2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell.

2.5h

USA

[e-mail]

1.888.802.0040
8:30am–7:00pm EST M–F

CANADA

[e-mail]

1.888.225.7378
8:30am–5:00pm EST M–F

or

AC adapter not included.

WE’RE HERE TO HELP. CONTACT US!

SHED SOME LIGHT

The LED light on your earbuds let you
know what they’re doing.

Pairing Mode

Connected

Low Battery

BLUETOOTH

Like any amazing couple, this one starts with a connection — one between
your device and the earbud’s Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet, or computer you’re using with the
earbuds has Bluetooth.

2. Turn on the earbuds and look for the little blinking light.

3. Do whatever your device needs you to do on its end.

4. Look for Jam Transit Evo Buds in your device’s Bluetooth list or click YES.

5. Now hit PLAY on your earbuds and crank it up — or down if you’re lame.

The device and Bluetooth will find each other every time, as long as the
earbuds are set to Bluetooth and your device’s Bluetooth is, you know, on.

Charging

Ready

®

CONNECTION — IT’S A SETUP

CONTROL YOUR DESTINY…OR AT LEAST YOUR EARBUDS

1. Play/Pause, press and hold for 3 seconds to
power on

2. Volume down/ Previous Track

3. Volume up/ Next Track

4. Power cord goes here

5. Shed some light on what your earbuds are doing
(see chart to left for details).

3s

4

3

1

2

Bluetooth

Devices

JAM Transit Evo Buds

5

®

on

> 

If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.

Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.

To disable pairing of an existing device and pair a new device, press and hold the
play/pause button for 3 seconds to activate pairing mode.

Note: If you turn on your Transit Evo Buds but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.

2m

COMING CLEAN

A soft, dry towel is all you need to
clean off your earbuds. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it. Remember
to keep the top flap flush with the
earbuds for the best protection.

LITTLE BIT OF SWEAT? NO WORRIES.

Working out? Not a problem. These earbuds are totally sweat resistant! The smart
folks who made these earbuds designed them to keep the party going through just
about any activity (they call it IPX4) But those designers aren't miracle workers.
Doing somethng like going for a swim in the deep end while wearing your earbuds
will eventually fill those holes you need for incredible sound with water. Remember
to keep the top flap flush with the earbuds for the best protection.

LOOK MA, NO HANDS!

When friends call to interrupt your party of one – and you know they will – answer the phone without disconnecting from your
JAM Transit Evo Buds. Yes, that’s right. Your earbuds have hands-free calling too. How amazing is that? Here’s how it works:

1. Make sure your phone and earbuds are connected through Bluetooth.

2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit Evo Buds.

3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Transit Evo Buds for 3 seconds to ignore the call.
THE COOLEST PART: The Transit Evo Buds know when a call is coming in and pause the music before ringing. When you hang up,

the music starts where it left off – and so does the party. If it’s you making the call, just start dialing from your phone, and the Evo
Buds automatically do their hands-free thing. Isn’t it refreshing to know your earbuds get you?

Check out the chart below for a complete guide on handling calls with your Transit Evo Buds.

Situation

st

1

Incoming call

On call

nd

2

Incoming call

Both calls Active

Short Press Play/Pause Button Long Press Play/Pause Button

Pick up call

End call

Call 1 on Hold, Pick-Up call 2

Hang up call 1, Switch to call 2

Move call from earbuds to device

Switch between 1

Reject call

Reject call 2

st

call and 2nd call