Jam HX-P250 Replay User Manual And Warranty Information

73

70

R28

USER GUIDE AND

CHARGE

WARRANTY INFORMATION

HX-P250

HEY THERE!

Thank you for purchasing
the JAM Replay. Check
out the sections below
for all the important
information about your
new speaker.

You’ve got questions? We’ve got answers.

Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P250)

Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.

To register, visit:

USA: www.jamaudio.com/customer-support/product-registration

CAN: canada.jamaudio.com/product-registration

JUST CHARGE IT

Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Replay needs about 3 hours for up to 5 hours of party time.

1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.

2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.

3h

USA

[e-mail]

1.888.802.0040
8:30am–7:00pm EST M–F

CANADA

[e-mail]

1.888.225.7378
8:30am–5:00pm EST M–F

or

AC adaptor not included.

WE’RE HERE TO HELP. CONTACT US!

CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER

1. Push it to play, push it again to pause

2. Turn the music down (press and hold for 3
seconds to move to the previous track)

3. Turn the music up (press and hold for 3
seconds to skip to the next track)

4. This is the microphone

5. Check out how much juice is in the battery

6. Lets you know when Bluetooth is paired

7. The power cord goes here

8. Here’s where you hook it up old-school

9. This is the power button

BLUETOOTH

Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.

2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.

3. Do whatever your device needs you to do on its end.

4. Look for JAM Replay in your device’s Bluetooth list or click YES.

5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.

Continued on page 2.

®

CONNECTION – IT’S A SETUP

SHED SOME LIGHT

Back:

8

7

AUX

1

2

5

3

4

6

CHARGE

Bottom:

9

3s

The LED lights on your speaker let
you know what it’s doing.

Bluetooth Light Battery Light

Pairing Mode

Connected

Aux-In Mode

Low Battery

Charging

Ready to Party

Bluetooth

Devices

JAM Replay

®

on

>

BLUETOOTH® CONNECTION, CONTINUED

The device and Bluetooth will find each other every time, as long as the
speaker is set to Bluetooth and your device’s Bluetooth is, you know, on.

If you’re connecting to a computer, you may have some extra steps on
that end. You’ll have to get that information from the computer compa­ny.

Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.

To disable pairing of an existing device and pair a new device, press and
hold the - and + buttons for 5 seconds to activate pairing mode.

Note: If you turn on your Replay but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.

Note: Once you've paired, if you pause the party for 15 minutes or more,
the Jam Replay will automatically shut off to preserve battery power.

2m

15m

HOOKING UP OLD-SCHOOL AUDIO, JACK

1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.

2. Turn on the speaker.

3. Hit PLAY on your device and crank it up —
or down if you’re lame.

You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?

AUX

CHARGE

COMING CLEAN

A soft, dry towel is all you need to
clean off your speaker. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.

HELLO? SPEAKERPHONE? YES!

When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM
Replay. Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:

1. Make sure your phone and speaker are connected through Bluetooth.

2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Replay.

3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Replay for 3 seconds to ignore the call.
THE COOLEST PART: The Replay knows when a call is coming in and pauses the music before ringing. When you hang up, the music

starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Replay
automatically does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?

Check out the chart below for a complete guide on handling calls with your Replay.

Situation

st

1

Incoming call

On call

nd

2

Incoming call

Both calls active

Short Press Play/Pause Button Long Press Play/Pause Button

Pick up call

End call

Call 1 on hold, pick up call 2

Move call from speaker to device

Reject call

Reject call 2

Hang up call 1, switch to call 2 Switch between 1st call and 2nd call

THE VOICE FROM WITHIN

When your JAM Replay isn’t rocking out, it can tell you all
sorts of things it’s doing: when it’s powering on, ready to pair,
paired, at maximum volume, charging, recieving a call, ending
a call, rejecting a call, and powering off.

Just like the global gadget it is, your speaker toggles between
several languages or no language at all. Your speaker can
parlay with you in English, Spanish, French, or Portuguese.
Making the change between language and tone is as simple
as pressing the + and - buttons at the same time. Click
though until the speaker starts speaking your language.

1 YEAR LIMITED WARRANTY

For detailed warranty instructions and information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: canada.jamaudio.com/warranty-1yr

To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email
for assistance (you can find their contact info on page 1).
Please make sure to have the model number of the
product available.