Jam HX-HP910 User Manual

67

USER GUIDE AND

WARRANTY INFORMATION

HX-HP910

HEY THERE!

Thank you for purchasing
the JAM Transit Touch.
Check out the sections
below for all the
important information
about your new
headphones.

You’ve got questions? We’ve got answers.

Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-HP910)

Register your headphones! Information about where
you bought them and how you’re using them is like
gold for the people who make these headphones.

To register, visit:

USA: www.jamaudio.com/customer-support/product-registration

CAN: canada.jamaudio.com/product-registration

JUST CHARGE IT

Charging the headphones is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit Touch needs about 3 hours for up to 12 hours of party time.

1. The cord that came with the headphones —
the one with the USB on one end and the micro
USB on the other — will work with your
computer.

2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.

3h

USA

[e-mail]

1.888.802.0040
8:30am–7:00pm EST M–F

CANADA

[e-mail]

1.888.225.7378
8:30am–5:00pm EST M–F

or

AC adapter not included.

WE’RE HERE TO HELP. CONTACT US!

CONTROL YOUR DESTINY ... OR AT LEAST YOUR HEADPHONES

1. This is the power button. It also lets you know what
your headphones are up to (see chart below for details)

2. The power cord goes here

3. Aux-in port to hook it up old-school

4. Touchpad — swipe or tap to control your headphones

5. Swipe clockwise to crank the music up

6. Swipe counter-clockwise to turn the music down

7. Tap to play, tap again to pause

8. Swipe forward or up to jam on to the next track

9. Swipe back or down to move to the previous track

SHED SOME LIGHT

The LED light on your headphones lets
you know what they’re doing.

Powering On

Pairing Mode

Connected

Low Battery

Charging

Ready to Party

BLUETOOTH

Like any amazing couple, this one starts with a
connection — one between your device and the
headphones’ Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet, or
computer you’re using with the headphones
has Bluetooth.

2. Turn on the headphones (press and hold the
power button for 3 seconds) and look for the
little blinking light.

Continued on page 2.

®

1

4

3

2

CONNECTION — IT’S A SETUP

5

8

6

9

7

3s

BLUETOOTH® CONNECTION, CONTINUED

3. Do whatever your device needs you to do on its end.

4. Look for JAM Transit Touch Headphones in your device’s
Bluetooth list or click YES.

5. Now hit PLAY on your headphones and crank it up — or down if
you’re lame.

The device and Bluetooth will find each other every time, as long as
the headphones are set to Bluetooth and your device’s Bluetooth is,
you know, on.

If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.

Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.

To disable pairing of an existing device and pair a new device, tap
and hold the touchpad for 6 seconds to activate pairing mode.

Note: If you turn on your Transit Touch Headphones but haven’t
started the party yet, they will automatically power off after 2 minutes
of unpaired inactivity.

Note: Once paired, if you pause the party for 15 minutes or more,
your headphones will automatically power off to preserve battery life.

Bluetooth

Devices

JAM Transit Touch

®

on

>

Enter Code:

0 0 0 0

2m 15m

HOOKING UP OLD-SCHOOL AUDIO, JACK

1. Plug one end of the cord into the headphones
and the other into the headphone jack on
your device.

2. Turn on the headphones.

3. Hit PLAY on your device and crank it up — or

COMING CLEAN

A soft, dry towel is all you need to
clean off your headphones. Using
water, harsh cleaners, or anything else
only starts messing with the mechanics
inside. So, yeah, don’t do it.

down if you’re lame.

You’ll have to play and pause the music from
your device, not your headphones. No problem.
You’re there anyway, right?

LOOK MA, NO HANDS!

When friends call to interrupt your party of one — and you know they will — answer the phone without disconnecting from your JAM
Transit Touch. Yes, that’s right. Your headphones have hands-free calling, too. How amazing is that? Here’s how it works:

1. Make sure your phone and headphones are connected through Bluetooth.

2. Answering and ending a call works the same way: simply tap the touchpad on your Transit Touch.

3. If you’d rather not talk, tap and hold the touchpad on your Transit Touch for 3 seconds to ignore the call.

THE COOLEST PART: The Transit Touch knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Transit
Touch automatically does its hands-free thing. Isn’t it refreshing to know your headphones totally get you?

Check out the chart below for a complete guide on handling calls with your Transit Touch.

Situation

st

1

Incoming call

On call

nd

2

Incoming call

Both calls active

Short Tap Touchpad Long Tap Touchpad

Pick up call

End call

Call 1 on hold, pick up call 2

Move call from headphones to device

Reject call

Reject call 2

Hang up call 1, switch to call 2 Switch between call 1 and call 2

1 YEAR LIMITED WARRANTY

For detailed warranty instructions and information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: canada.jamaudio.com/warranty-1yr

To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.