Jam HX-HP420 User Manual

70

55

R17

USER GUIDE AND

WARRANTY INFORMATION

HX-HP420

HEY THERE!

Thank you for purchasing
the JAM Transit. Check
out the sections below
for all the important
information about your
new headphones.

You’ve got questions? We’ve got answers.

Contact a Customer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-HP420)

Register your headphones! Information about where
you bought them and how you’re using them is like
gold for the people who make these headphones.

To register, visit:

USA: www.jamaudio.com/customer-support/product-registration

CAN: http://canada.jamaudio.com/product-registration

JUST CHARGE IT

Charging the headphones is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit needs about 3 hours for up to 11 hours of party time.

1. The cord that came with the
headphones—the one with the USB on one
end and the Micro USB on the other—will work
with your computer.

2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a Micro USB the
next time you’re at the store, or use any USB
AC adapter, including the one for your cell.

3h

USA

[e-mail]

1.888.802.0040
8:30am–7:00pm EST M–F

CANADA

[e-mail]

1.888.225.7378
8:30am–5:00pm EST M–F

or

AC adaptor not included.

WE’RE HERE TO HELP. CONTACT US!

CONTROL YOUR DESTINY... OR AT LEAST YOUR HEADPHONES SHED SOME LIGHT

1. Push it to play, push it again to pause.
Press and hold for 3 seconds to power on.

2. Turn the music up

3. Turn the music down

4. Jam on to the next song

5. Skip back a track

6. Shed some light on what your headphones
are doing (see chart to the right for details)

7. The power cord goes here

8. Aux-in port to hook it up old school.

BLUETOOTH

Like any amazing couple, this one starts with a connection—one between
your device and the headphones’ Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet or computer you’re using with the
headphones has Bluetooth.

2. Turn on the headphones (press and hold play/pause for 3 seconds) and
look for the little blinking light.

3. Do whatever your device needs you to do on its end.

®

CONNECTION – IT’S A SETUP

6

4

5

2

1

3

Continued on page 2.

8

7

The LED light on your headphones lets
you know what they’re doing.

Pairing Mode

Connected

Low Battery

Charging

Ready to Party

3s