jam HX-HP150GY User manual
94
R22
USER GUIDE AND
WARRANTY INFORMATION
HX-HP150
HEY THERE!
Thank you for purchasing
the JAM Transit City.
Check out the sections
below for all the
important information
about your new
headphones.
You’ve got questions? We’ve got answers.
Contact a Customer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-HP150)
Register your headphones! Information about where
you bought them and how you’re using them is like
gold for the people who make these headphones.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/product-registration
JUST CHARGE IT
Charging the headphones is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit City needs about 3 hours for up to 12 hours of party time.
1. The cord that came with the
headphones—the one with the USB on one
end and the Micro USB on the other—will work
with your computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a Micro USB the
next time you’re at the store, or use any USB
AC adapter, including the one for your cell.
3h
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
CANADA
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
or
AC adaptor not included.
WE’RE HERE TO HELP. CONTACT US!
CONTROL YOUR DESTINY... OR AT LEAST YOUR HEADPHONES SHED SOME LIGHT
1. This is the power button. It also lets you
know what your speaker is up to (see chart
to the right for details)
2. Turn the music up
3. Turn the music down
4. Press it to play, press it again to pause
5. Skip back a track
6. Jam on to the next song
7. Noise cancelling feature
8. Aux-in port to hook it up old school
9. The power cord goes here
BLUETOOTH
Like any amazing couple, this one starts with a connection—one between
your device and the headphones’ Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet or computer you’re using with the
headphones has Bluetooth.
2. Turn on the headphones (press and hold the power button for 3
seconds) and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
Continued on page 2.
®
CONNECTION – IT’S A SETUP
1
7
2
5
6
4
3
8
9
The LED light on your headphones lets
you know what they’re doing.
Powering On
Pairing Mode
Connected
Low Battery
Charging
Ready to Party
3s
BLUETOOTH® CONNECTION, CONTINUED
4. Look for Jam Transit City Headphone in your device’s Bluetooth
list or click YES.
5. Now hit PLAY on your headphones and crank it up—or down if
you’re lame.
The device and Bluetooth will find each other every time, just as long
as the headphones are set to Bluetooth and your device’s Bluetooth
is, you know—on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device, press
and hold the + and - buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Transit City Headphones but haven’t
started the party yet, they will automatically power off after 2 minutes
of unpaired inactivity.
Note: Once paired, if you pause the party for 15 minutes or more,
your headphones will automatically power off to preserve battery life.
Bluetooth
Devices
Jam Transit City
®
on
>
2m 15m
HOOKING UP OLD SCHOOL AUDIO, JACK
1. Plug one end of the cord into the headphones
and the other into the headphone jack on
your device.
2. Turn on the headphones.
3. Hit PLAY on your device and crank it up - or
COMING CLEAN
A soft, dry towel is all you need to
clean off your headphones. Using
water, harsh cleaners, or anything else
only starts messing with the mechanics
inside. So, yeah, don’t do it.
down if you’re lame.
You’ll have to play and pause the music from
your device, not your headphones. No
problem. You’re there anyway, right?
LOOK MA, NO HANDS!
When friends call to inturrupt your party of one—and you know they will—answer the phone without disconnecting from your JAM
Transit City. Yes, that’s right. Your headphones have hands-free calling, too. How amazing is that? Here’s how it works:
1. Make sure your phone and headphones are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit City.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Transit City for 3 seconds to ignore the call.
THE COOLEST PART: The Transit City knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off—and so does the party. If it’s you making the call, just start dialing from your phone, and the Transit City
automatically does its hands-free thing. Isn’t it refreshing to know your headphones totally get you?
NOTE: If your Transit City is connected to a smart phone, you can talk to Siri
PLAY/PAUSE button and voilà!
Check out the chart below for a complete guide on handling calls with your Transit City.
®
(or any other voice control assistant). Just hold down the
Situation
st
1
Incoming call
Short Press Play/Pause Button Long Press Play/Pause Button
Pick-Up call
On call
nd
2
Incoming call
Both calls active
Call 1 on Hold, Pick-Up call 2
Hang up call 1, switch to call 2 Switch between call 1 and call 2
1 YEAR LIMITED WARRANTY
For detailed Warranty Instructions and Information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: http://canada.jamaudio.com/warranty-1yr
End call
Reject call
Move call from headpones to device
Reject call 2
To obtain warranty service on your Jam product, contact a
Consumer Relations Representative by telephone or email for
assistance (You can find their contact info on page 1). Please
make sure to have the model number of the product available.
Loading...