Jam HX-EP400 User Manual

USER GUIDE AND

HX-EP40 0

WARRANTY INFORMATION

TRANSIT FITNESS BUDS

HEY THERE!

Thank you for purchasing
the JAM TRANSIT
FITNESS BUDS. Check
out the sections below
for all the important
information about your
new earbuds.

JUST CHARGE IT

Charging the earbuds is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit Fitness Buds need about 1 hour for up to 7 hours of party time.

1. The cord that came with the earbuds — the one with the USB
on one end and the micro USB on the other — will work with
your computer.

WE’RE HERE TO HELP. CONTACT US!

You’ve got questions? We’ve got answers.

Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-EP400)

Register your earbuds! Information about where
you bought them and how you’re using them is like
gold for the people who make these earbuds.

To register, visit:

USA: www.jamaudio.com/customer-support/product-registration

CAN: canada.jamaudio.com/product-registration

USA

[e-mail]

1.888.802.0040
8:30am–7:00pm EST M–F

CANADA

[e-mail]

1.888.225.7378
8:30am–5:00pm EST M–F

1h

2. If you want to use the wall outlet, you’ll need to pick up a
power cord with a micro USB the next time you’re at the store, or
use any USB AC adapter, including the one for your cell phone.

SHED SOME LIGHT

The LED light on your earbuds lets you
know what they’re doing.

Pairing Mode

Connected

Low Battery

Charging

Ready to Party

CONTROL YOUR DESTINY ... OR AT LEAST YOUR EARBUDS

1. Play/Pause, press and hold for 3 seconds
to power on

2. Volume down/ Previous Track

3. Volume up/ Next Track

4. Power cord goes here

5. Shed some light on what your earbuds
are doing (see chart to left for details)

6. Smart magnetic connection: disables
power and keeps your earbuds together
when not in use

BLUETOOTH® CONNECTION — IT’S A SETUP

Like any amazing couple, this one starts with a connection — one between your
device and the earbuds’ Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet, or computer you’re using with the earbuds
has Bluetooth.

2. Turn on the earbuds (press and hold the power button for 3 seconds) and look
for the little blinking light.

3. Do whatever your device needs you to do on its end.

4. Look for Jam Transit Fitness Buds in your device’s Bluetooth list or click YES.

5. Now hit PLAY on your earbuds and crank it up — or down if you’re lame.

The device and Bluetooth will find each other every time, as long as the earbuds
are set to Bluetooth and your device’s Bluetooth is, you know, on.

AC adapter not included.

3

2

4

s

3

1

5

Bluetooth

Devices

Jam Transit Fitness Buds

6

®

on

>

BLUETOOTH® CONNECTION, CONTINUED

If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.

Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.

Note: If you turn on your Transit Fitness Buds but haven’t started the party yet, they will
automatically power off after 2 minutes of unpaired inactivity.

2m 15m

LOCK IT DOWN

Tired of your buds always falling out of your ears? Our SecurFit™ tips
are here to save the day.

1. Place SecurFit™ tips in ear.

2. Turn until comfortably
locked in place.

LITTLE BIT OF SWEAT?
NO WORRIES.

Working out? Not a problem. These
earbuds are totally sweat resistant! The
smart folks who made these earbuds
designed them to keep the party going
through just about any activity (they call
it IPX4). But those designers aren’t
miracle workers. Doing something like
going for a swim while wearing your
earbuds will eventually fill them with
water. Remember to keep the top flap
flush with the earbuds for the best
protection.

LOOK MA, NO HANDS!

When friends call to interrupt your party of one — and you know they will — answer the phone without disconnecting from your JAM
Transit Fitness Buds. Yes, that’s right. Your earbuds have hands-free calling, too. How amazing is that? Here’s how it works:

1. Make sure your phone and earbuds are connected through Bluetooth.

2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit Fitness Buds.

3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Transit Fitness Buds for 3 seconds to ignore the call.
THE COOLEST PART: The Transit Fitness Buds know when a call is coming in and pause the music before ringing. When you hang

up, the music starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the
Fitness Buds automatically do their hands-free thing. Isn’t it refreshing to know your earbuds totally get you?

Check out the chart below for a complete guide on handling calls with your Transit Fitness Buds.

Situation

st

Incoming call

1

Short Press Play/Pause Button Long Press Play/Pause Button

Pick-Up call

Reject call

On call

nd

2

Incoming call

Both calls Active

Call 1 on hold, Pick-Up call 2

Hang up call 1, Switch to call 2

End call

THE PERFECT FIT

Put the buds in your ears with the strap behind your neck (trust us, no one looks
good with the strap in front) to see if the length is comfortable. If the fit is too loose
or too firm, adjust it with the CustomFit

1. Find the middle of the cord (indicated by the colored square).

2. Wind cord around clips as many times as necessary until the
length is comfortable.

3. Secure both ends of the cord through the locks.

4. Place behind your neck and you’re good to go!

™

cord management system.

Move call from speaker to device

Reject call 2

st

Switch betwen 1

3

& 2nd call

1

2

3