32
11
17
USER GUIDE AND
WARRANTY INFORMATION
HX- EP 315
HEY THERE!
Thank you for purchasing
the JAM Transit Mini
Buds. Check out the
sections below for all the
important information
about your new earbuds.
You’ve got questions? We’ve got answers.
Contact a Customer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-EP315)
Register your earbuds! Information about where
you bought them and how you’re using them is like
gold for the people who make these earbuds.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/product-registration
JUST CHARGE IT
Charging the earbuds is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit Mini Buds need about 3 hours for up to 7 hours of party time.
1. The cord that came with the earbuds—the
one with the USB on one end and the Micro
USB on the other—will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a Micro USB the
next time you’re at the store, or use any USB
AC adapter, including the one for your cell.
3h
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
CANADA
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
WE’RE HERE TO HELP. CONTACT US!
or
AC adaptor not included.
CONTROL YOUR DESTINY... OR AT LEAST YOUR EARBUDS SHED SOME LIGHT
1. This is the power button
2. Push it to play, push it again to pause
3. Turn the music up (press and hold to skip
to the next track)
4. Turn the music down (press and hold to
move to the previous track)
5. The power cord goes here
6. Shed some light on what your earbuds
are doing (see chart to the right for details)
7. Smart magnetic connection – keeps your
earbuds together when not in use
BLUETOOTH
Like any amazing couple, this one starts with a connection—one
between your device and the earbuds’ Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet or computer you’re using with the
earbuds has Bluetooth.
2. Turn on the earbuds (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
Continued on page 2.
®
CONNECTION – IT’S A SETUP
5
3
1
6
2
7
4
7
7
The LED light on your earbuds lets you
know what they’re doing.
Pairing Mode
Connected
Low Battery
3s
Charging
Ready to Party
BLUETOOTH® CONNECTION, CONTINUED
®
on
4. Look for Jam Transit Mini Buds in your device’s Bluetooth list or click YES
5. Now hit PLAY on your earbuds and crank it up—or down if you’re lame.
Bluetooth
Devices
Jam Transit Mini Buds
>
The device and Bluetooth will find each other every time just as long as the earbuds are
set to Bluetooth and your device’s Bluetooth is, you know—on.
If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code. If prompted
enter “0000” as the code.
2m 15m
Note: If you turn on your Transit Mini Buds but haven’t started the party yet, they will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once paired, if you pause the party for 15 minutes or more, the Transit Mini buds
will enter into a lower power consumption state.
LOOK MA, NO HANDS!
When friends call to inturrupt your party of one—and you know they will—answer the phone without disconnecting from your JAM
Transit Mini Buds. Yes, that’s right. Your earbuds have hands-free calling, too. How amazing is that? Here’s how it works:
1. Make sure your phone and earbuds are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit Mini Buds.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Transit Mini Buds for three seconds to ignore the call.
THE COOLEST PART: The Transit Mini Buds know when a call is coming in and pause the music before ringing. When you hang up,
the music starts where it left off—and so does the party. If it’s you making the call, just start dialing from your phone, and the Mini
Buds automatically do their hands-free thing. Isn’t it refreshing to know your earbuds totally get you?
NOTE: If your Transit Mini Buds are connected to a smart phone, you can talk to Siri
down the PLAY/PAUSE button and voilà!
Check out the chart below for a complete guide on handling calls with your Transit Mini Buds.
®
(or any other voice control assistant). Just hold
Situation
st
1
Incoming call
On call
nd
2
Incoming call
Short Press Play/Pause Button Long Press Play/Pause Button
Pick-Up call
End call
Call 1 on Hold, Pick-Up call 2
THE PERFECT FIT
Put the buds in your ears with the strap behind your neck (trust us, no one looks
good with the strap in front) to see if the length is comfortable. If the fit is too loose
or too firm, adjust it with the CustomFit™ cord management system.
1. Find the middle of the
1
cord (indicated by the
colored square).
2. Wind cord around clips as
many times as necessary
until the length is
comfortable.
3. Secure both ends of the
3
2
3
cord through the locks.
4. Place behind your neck
and you’re good to go!
COMING CLEAN 1 YEAR LIMITED WARRANTY
A soft, dry towel is all you need to
clean off your earbuds. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.Remember
to keep the top flap flush with the
earbuds for the best protection.
For detailed Warranty Instructions and Information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: http://canada.jamaudio.com/warranty-1yr
To obtain warranty service on your Jam product, contact a Consumer Relations
Representative by telephone or email for assistance (You can find their contact info
on page 1). Please make sure to have the model number of the product available.
Reject call
Move call from earbuds to device
Reject call 2
LITTLE BIT OF SWEAT?
NO WORRIES.
Working out? Not a problem. These
earbuds are totally sweat resistant!
The smart folks who made these
earbuds designed them to keep the
party going through just about any
activity (they call it IPX4). But those
designers aren’t miracle workers.
Doing something like going for a
swim in the deep end while wearing
your earbuds will eventually fill those
holes you need for incredible sound
with water. Remember to keep the
top flap flush with the earbuds for
the best protection.
STUFF THE GOVERNMENT MAKES US SAY STUFF OUR LAWYERS MAKE US SAY
FCC Compliance:
Note: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX
could void the user's authority to operate this equipment.
IC Caution: RSS-GEN Issue 4 November 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Listen responsibly. To avoid hearing damage, make sure
the volume on your device is turned down before connecting
headphones. After placing headphones on your ears, gradually turn
up the volume until you reach a comfortable listening volume.
• Use this product only for its intended use as described in this
manual. Do not use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to Smartphones,
iPod/MP3 player or any other device.
• Do not place or store this product where it can fall or be dropped
into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable
or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or
cleaning solvents.
Attention California Residents:
WARNING: This product contains chemicals known to the State
of California to cause cancer, birth defects and other
reproductive harm.
A MESSAGE FROM THE ENVIRONMENT
WARNING:
This product has an internal, non-replaceable lithium battery. Please
dispose in accordance with your local, state, province and country
guidelines.
This product contains small parts that may present a choking hazard
for young children.
CAUTION: All servicing of this product must be performed by
authorized HMDX Service Personnel only.
©2015 HMDX. All Rights Reserved.
IB -H XE P315
BC
Loading...