WIRELESS STEREO HEADPHONES
USER GUIDE AND WARRANTY INFORMATION
For detailed Warranty Instructions and Information visit: http://www.hmdxaudio.com/
products/jam-wireless-portable-speaker.html. To obtain warranty service on your HMDX
product, contact a Consumer Relations Representative by telephone at 1-800-753-3000 or
email cservice@hmdxaudio.com for assistance. Please make sure to have the model number
of the product available. Representatives are available 8:30am–7:00pm EST Monday–Friday.
Por manual de instrucciones e Información de garantía en español visítenos en
www.hmdxaudio.com
HMDX Jam and HMDX are trademarks of HMDX.
©2013 HMDX. All Rights Reserved.
IB-HXHP610
PLEASE TAKE A MOMENT NOW
AND REGISTER YOUR PRODUCT AT:
www.hmdxaudio.com
Your valuable input will help us create
even better products in the future.
Battery
Indicator
Status
Solid RED
Solid BLUE
Charging
Fully Charged
Quickly
Flashes BLUE
Slowly Flashes
BLUE
Pairing Mode
Paired
Bluetooth
®
Indicator
Status
Thank you for spreading the Jam and purchasing the HMDX Jam
Fusion Wireless Headphones. Be sure to check out the entire JAM
product line on our website: www.hmdxaudio.com — Where there’s
a Jam there’s a party!
Package Contents
Jam Fusion
User Manual
Pouch
Charging the Unit
Allow approximately 3 hours for a full charge. Can be charged by using the
USB to Micro USB cord (included) through computer or AC adapter with USB
jack (not included).
NOTE:
• Battery will last up to 6 hours when connected wirelessly.
• If battery is depleted you can still listen to music through the AUX line-in jack.
• 3 tones will sound every 40 seconds when less than 10% battery life remains.
Indicators
3.5MM AUX
Cable
USB Cord
Controls
1. Line-In Audio Jack
2. Jam2 Pairing Switch
3. Forward
4. Volume Up
5. Power Button
6. Play/Pause
7. Volume Down
8. Reverse
9. Battery Status &
Bluetooth® Indicator
10. USB Charging Port
10
9
2
8
7
Pairing a Single Jam Fusion Headphone
1. Make sure your device has Bluetooth® capability.
2. Make sure Jam2 pairing switch is in single position (see Fig. 2).
3. Press and hold power button for 5 seconds; indicator will
begin to flash.
4. Pair your device with the unit by selecting Jam Fusion from
your Bluetooth® listings.
5. Press play and use controls on the unit to adjust desired
volume, forward to next track or repeat track.
NOTE:
• Once you have successfully paired your device, you may not
need to repeat the above steps. Please ensure the AUX cable is
unplugged and your device has been Bluetooth® enabled.
• When pairing with a computer, please consult your computer manufacturer
for Bluetooth® pairing instructions and/or the latest Bluetooth® Drivers.
• A pairing code is not required.
2
6
5
1
4
3
2
FIG. 1
FIG. 2
Pairing 2 Jam Fusion Headphones
1. Pair one headphone to your device by following the single
pairing instructions.
2. Move the Jam2 pairing switch to the Jam2 position on first
headphone (see Fig. 3).
3. On the second headphone, move Jam2 switch to the Jam2
position and power on.
4. The Bluetooth® indicator light will flash quickly until the units are
paired. Once paired you will hear a hint tone and the Bluetooth®
indicator will slowly flash blue.
NOTE: Jam2 indicator will flash white when successfully paired.
Listening to your device through Auxiliary Line-In Audio Jack
1. Connect AUX cable to the headphone or line-out jack of an audio device
and plug the other end of the cable into the line-in audio jack on the unit.
2. Press PLAY on device and use device controls to adjust volume or
FWD/RVS tracks.
NOTE:
• Auxiliary line-in is a passive feature and does not require the power to be on.
• When listening through auxiliary line-in, the controls on the Fusion are disabled,
always use the controls on your device.
Built-In Speakerphone
The Jam Fusion is equipped with a built-in speakerphone, for easy hands free talking:
1. Make sure the Jam Fusion has been successfully paired with your device.
2. To answer a call, simply press any button when you hear a ringtone.
3. To end call, press any button except +/- Volume buttons.
NOTE:
• When an incoming or outgoing call is detected, the Fusion will pause the music
and a ringtone will sound. After the call is terminated, the music will resume to
play automatically where it left off.
• When making a call, use your phone to dial.
• To refuse an incoming call press and hold any button for 3 seconds.
• If the Jam Fusion is connected to the AUX cable when an incoming call is
detected, use your phone to answer or refuse the call
2
FIG. 3
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Maintenance
Only use a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or
abrasive cleaner to clean.
FCC Warning
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
Changes or modifications not expressly approved by HMDX could void the user's
authority to operate the equipment.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
WARNING:
• Do not place speakers too close to ears. May cause damage to ear drums,
especially in young children.
• Use this product only for its intended use as described in this manual. Do not
use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to Smartphones, iPod/MP3 player or
any other device.
• Do not place or store this product where it can fall or be dropped into a
tub or sink.
• Do not submerge into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable
or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water
or cleaning solvents.
• This product has an internal, non-replaceable lithium battery. Please dispose in
accordance with your local sate, providence and country guidelines.
Loading...