Page 1
Conserver® XLH
Models
Conserver® XLH
Standard Features Mandatory Specs
• Multi-cycle solid state timer
(Heavy, Medium and Normal)
• Internal sump design
• Built-in waste accumulator
• 3” (76 mm) stainless steel
adjustable bullet feet
• Delimer switch for easy removal
of hard water deposits
• Removable scrap screen
• Air gap instead of vacuum
breaker
• Door safety switch
• Convenient top mounted
controls
• Auto start
• Interchangeable upper and
lower stainless steel wash/rinse
arms
• Wash thermometer
• Low product indicator light
Project
Item
Quantity
CSI Section 11400
Approval
Date
Specify voltage _____________
Opons
Water Hammer Arrestor
Scaltrol
False Panel
Flanged Feet
Audible Low Product Alarm
Heater - 2 x 750W @ 120V
Accessories
36-Compartment Rack
4-1/8” tall (105 mm)
5-5/8” tall (143 mm)
7” tall (178 mm)
Combination Rack
Peg Rack
Conserver® XLH
_
Specifications
Uses 1.02 gallons (3.9 liters) water per rack
39 racks per hour (Normal cycle)
Single point electrical connection
Self-draining stainless steel pump eliminates
soil/detergent carryover between wash and
rinse cycles
Dump and ll feature disposes of dirty water,
replacing it with a fresh water rinse every cycle
Field convertible from straight to corner and
corner to straight for exible installations
and applications
18-1/2” (470 mm) vertical inside clearance
3 built-in dispensing pumps for detergent,
rinse agent and sanitizer are controlled
by individual priming switches
Fully automatic timed cycles - 1.5 minutes,
3 minutes or 5 minutes
Large removable scrap screen
Heavy duty stainless steel construction
www.jacksonwws.com
Page 2
Conserver® XLH
Legend:
E1: Main Electrical Connection (1-1/8" DIA Hole)
W: Main Inlet Water Connection (1/2" NPT - Female)
D: Drain Connection (2" NPT - Male)
DET: Detergent Bulkhead Access (
SAN: Sanitizer Inlet
RA: Rinse Aid Inlet
ALL DIMENSIONS ARE +1/2"
E1
3
[171.45 mm]
6
4
1
18
[469.90 mm]
2
1
[852.45 mm]
33
2
1
33-
[850.90 mm]
2
7
" DIA Hole)
8
6 [152.40 mm]
7
[1444.05 mm]
56
8
1
2
2
DET
SAN
RA
1
29
[748.82 mm]
2
[62.57 mm]
W
78 [1981.20 mm]
WITH DOORS
OPEN
65 [1649.52 mm]
D
7
[224.11 mm]
8
8
3
[85.90 mm]
3
8
MODEL NO.
Conserver®
XLH
1 [24.63 mm]
1
[337.18 mm]
13
4
MACHINE DIMENSIONS
33”
WIDTH BETWEEN
DISHTABLES
25-1/4”
(641 mm)
HEIGHT WIDTH DEPTH WEIGHT CLASS CUBE HEIGHT WIDTH DEPTH
68-1/2”
(1740 mm)
(838 mm)
1
29
[748.50 mm]
2
DRAIN
HEIGHT
32-3/4”
(832 mm)9”(229 mm)
3/4” (19mm)
20-1/2” (521mm)
SHIPPING INFORMATION
241 lbs
(109 kg)
92.5
64.9
cu. ft.
(2007 mm)
TABLE DIMENSIONS
CONNECTION TO DISHMACHINE
1-1/2” (381mm) ROLL
79”
33”
(838 mm)
POWER REQUIREMENTS PERFORMANCE CAPABILITIES
Electrical Requirement 115V/60HZ/1PH - 13.2A
20AService Breaker Size
WATER REQUIREMENTS
RECOMMENDEDMINIMUM
Inlet Temperature
Wash Operating Temperature
Rinse Operating Temperature
120˚F (49 ˚C)
120˚F (49 ˚C)
120˚F (49 ˚C)
140˚F (60 ˚C)
140˚F (60 ˚C)
140˚F (60 ˚C)
Jackson WWS, Inc.
Shipping Address: 6209 North U.S. Highway 25E, Gray, KY 40734
Mailing Address: P.O.Box 1060, Barbourville, KY 40906
Telephone: 888-800-5672 • Fax: 606-523-1799
Email: info@jacksonwws.com
07610-004-00-91 [03/06/13]
Flow Pressure (PSI)
Wash Pump Motor Horsepower
Pump Capacity (GPM)
Minimum Chlorine Required (PPM)
HOW TO SPECIFY:
Conserver® XLH
www.jacksonwws.com
We reserve the right to change specications in this bulletin without incurring any obligation for equipment previously or subsequently sold.
43”
(1092 mm)
15
3/4
55
50
Loading...