Jackson CONSERVER XL User Manual

Conserver® XL
Models
Conserver® XL
Project
Item
Quantity
CSI Section 11400
Date
Standard Features Mandatory Specs
Electromechanical control
Built in waste accumulator
3” (76 mm) stainless steel
adjustable bullet feet
Delimer switch for easy removal
of hard water deposits
Removable scrap screen
Air gap instead of vacuum
breaker
Door safety switch
Convenient top mounted
controls
Auto start
Interchangeable upper and
lower stainless steel wash/rinse arms
Wash/rinse thermometer
Low product indicator light
Specify voltage _____________
Options
50Hz Cycle Water Hammer Arrestor Scaltrol False Panel Flanged Feet Audible Low Product Alarm
Accessories
36-Compartment Rack
4-1/8” tall (105 mm) 5-5/8” tall (143 mm) 7” tall (178 mm) Combination Rack Peg Rack
Conserver® XL
_
Specifications
Uses 1.5 gallons (6 liters) water per rack
37 racks per hour
Single point electrical connection
Self-draining stainless steel pump eliminates soil/detergent carryover between wash and rinse cycles
Dump and fill feature disposes of dirty water, replacing it with a fresh water rinse every cycle
Field convertible from straight to corner and corner to straight for flexible installations and applications
Dual-point drain connections allow for versatile installations
SHIP PING AD DRESS
6209 North U.S. Hi ghway 25E
Gray , KY 40 734
MAILING ADDR ESS
P.O. Box 106 0
Barbourville , KY 40906
17-1/4” (438 mm) vertical inside clearance
3 built-in dispensing pumps for detergent, rinse agent and sanitizer are controlled by individual priming switches
Fully automatic timed cycles - 90 seconds, 3 minutes or 5 minutes
Large removable scrap screen
Heavy duty stainless steel construction
Tel: 1-888-8 00-5672
Fax: 606-523 -1799
info@jackson msc.com
www.jacksonm sc.com
Conserver® XL
SIDE OF MACHINE C
TO OF ELEC. CON.
L
1
13
[343mm]
2
5 [127mm]
TOP OF MACHINE
C
TO OF ELEC. CON.
L
BACK OF MACHINE
C
TO OF DRAIN
L
A
1
78
[1994mm]
2
W/DOOR OPEN
66 [1677mm]
4 [105mm]
D
17 [432mm]
34 [864mm]
TABLE HEIGHT
1
4
[117mm]
BACK OF CONTROL BOX
2
TO BACK OF MACHINE
C
1
1
[37mm]
2
EDGE OF WATER INLET
TO SIDE OF MACHINE
1
1
[40mm]
2
B
1 [25mm]
C
OF WATER INLET
L
TO BACK OF MACHINE
1
56
[1436mm]
2
9 [226mm]
LEGEND
A - ELECTRICAL CONNECTION B - WATER INLET, 3/4" IPS C - DRAIN CONNECTION, 2" IPS D -
STANDARD CLEARANCE BETWEEN MACHINE AND WALL (WITH DISHTABLE) IS 4" [105mm]
All dimensions are +/- 1/2" from floor due to adjustable bullet feet
3/4” (19mm)
20-1/2” (521mm)
C
1
3
[86mm]
2
TABLE DIMENSIONS
CONNECTION TO DISHMACHINE
1
61
[1561mm]
2
FLOOR TO OF WATER INLET
1-1/2” (381mm) ROLL
C
L
MODEL NO.
Conserver® XL
MACHINE DIMENSIONS
33”
WIDTH BETWEEN
DISHTABLES
25-1/4”
(641 mm)
32-3/4”
(832 mm)9”(229 mm)
HEIGHT WIDTH DEPTH WEIGHT CLASS CUBE HEIGHT WIDTH DEPTH
68-1/2”
(1740 mm)
(838 mm)
DRAIN
HEIGHT
SHIPPING INFORMATION
280 lbs
(127 kg)
92.5
POWER REQUIREMENTS PERFORMANCE CAPABILITIES
Model Conserver® XL
Electrical Requirement 115v/60~1ø-11.4A
15AService Breaker Size
WATER REQUIREMENTS
RECOMMENDEDMINIMUM
Inlet Temperature
Wash Operating Temperature
Rinse Operating Temperature
SHIP PING AD DRESS
6209 North U.S. Hi ghway 25E
Gray , KY 40 734
120˚F (49 ˚C)
120˚F (49 ˚C)
120˚F (49 ˚C)
MAILING ADDR ESS
P.O. Box 106 0
Barbourville , KY 40906
140˚F (60 ˚C)
140˚F (60 ˚C)
140˚F (60 ˚C)
Tel: 1-888-8 00-5672
Fax: 606-523 -1799
info@jackson msc.com
Flow Pressure (PSI)
Wash Pump Motor Horsepower
Pump Capacity (GPM)
Minimum Chlorine Required (PPM)
HOW TO SPECIFY:
Conserver® XL
www.jacksonm sc.com
07610-002-66 -3 (03/01/12)
64.9
cu. ft.
79”
(2007 mm)
33”
(838 mm)
43”
(1092 mm)
15-25
3/4
55
50
Loading...