How do I pair my Jabra Elite 65t or Jabra Elite Active 65t with my smartphone?
1. Start by ensuring the right earbud is turned off and not in the charging case. To manually turn off
the earbud, press and hold the Multi-function button until the LED flashes red.
2. Next, press and hold the Multi-function button on the right earbud (5 seconds) until you hear the
connection instructions in the earbud, and the LED flashes blue. Release the button, and follow
the voice-guided instructions to pair with your smartphone.
3. You may need to press and hold the Volume down button on the left earbud (1 second) to turn it
on.
Note: If pairing with a smartphone for the first time, the Jabra Elite 65t/Jabra Elite
Active 65t automatically goes into pairing mode after being turned on. Follow these
steps to complete first-time pairing.
1. Simultaneously press and hold (3 seconds) the Multi-function button on the right earbud and
the Volume down button on the left earbud to turn on the earbuds.
2. Follow the voice instructions to pair with your smartphone.
Note: If you decide to charge the earbuds before pairing for the first time, the Jabra
Elite 65t/Jabra Elite Active 65t earbuds will turn on automatically and go into pairing
mode after you remove them from the charging case.
Was this useful?
Yes No
How do I reset my Jabra Elite 65t or Jabra Elite Active 65t?
Resetting the earbuds will reset all settings and clear the list of previously paired
devices.
Press and hold (10 seconds) the Multi-function button on the right earbud until the
LED flashes purple.
After resetting, you will need to re-pair the earbuds with your smartphone. Remember
to delete the previous pairing before you re-pair.
Was this useful?
Yes No
What do the LED lights on my Jabra earbuds and charging case mean?
Note: The following description is in English only. For a description in your local
language, refer to the user manual available in the Technical Documents section of
this page.
Battery status details:
LED for individual earbud
Green: 67-100%
Yellow: 34-66%
Red: 0-33%
LED for charging case and combined earbuds
Green: 67-100%
Yellow: 34-66%
Red: 0-33%