Jabra 204260 User Manual

VXi BlueParrott B350-XT User Guide

TABLE OF CONTENTS

Safety Information ..........................................3

Package Contents ..........................................4

Glossary of Terms ............................................5

Headset Overview ..........................................6

Charging the Headsets ....................................7

• Battery Power Indicators

• Operation While Using the Charger/Adapter

Getting Started ................................................9

• On/Off/Standby

• Pairing with a Phone i. NFC Pairing ii. Regular Pairing

• Wearing and Adjusting the B350-XT

• Making/Taking Calls

Parrott Button ................................................13

Advanced Features and Functions..................14

• Multiple Device Pairing

• Multipoint Mode

• Proximity Pairing

• Additional Features and Functions i. Last Number Redial ii. Call Waiting/Rejecting a Call iii. Rejecting a Call iv. Phone Voice Control v. Muting vi. Transferring Audio vii.Turn Headset Indicator Lights On/Off

• Resetting Headset Paired Devices List

Functions & Indicators Table ..........................18

Specifications ................................................24

VXi BlueParrott®B350-XT User Guide PAGE 2

SAFETY INFORMATION

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for your ears to adapt to volume that is too high, and this could result in permanent hearing damage without any noticeable discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.

• Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 140° F (will cause equipment failure).

VXi BlueParrott®B350-XT User Guide PAGE 3

PACKAGE CONTENTS

1. B350-XT™ Headset with Leatherette Ear Cushion

2. Spare Foam Ear Cushion

3. Spare Microphone Windscreen

4. USB Charging Cable

5. AC/DC Wall Charger

6. Auto (DC) Adapter

7. Quick-Start Guide*

8. Warranty and Compliance Document*

*Not pictured.

Images are not shown to scale.

VXi BlueParrott®B350-XT User Guide PAGE 4

GLOSSARY OF TERMS

• On: Headset is on, but there is no connection to the phone (red light will flash).

• MFB: Abbreviation for “Multifunction Button.”

• Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.

• Paired: Two Bluetooth devices agree to communicate with one another.

• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light will flash).

• Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light will flash).

VXi BlueParrott®B350-XT User Guide PAGE 5

HEADSET OVERVIEW

A. Flexible Microphone Boom (White dot indicates "talk" side.)

B. Volume Down

C. Volume Up/Mute

D. Multifunction Button (MFB)

E. Indicator Lights

F. Parrott Button

VXi BlueParrott®B350-XT User Guide PAGE 6

CHARGING THE HEADSET

Connect USB charger cord into the headset’s USB charging port. If the headset is not fully charged, the indicator will turn red. When the indicator turns blue and stays blue the unit is fully charged. A fully discharged battery will need approximately 3.5 hours to achieve a complete charge.

Battery Power Indicators

While charging, the MFB’s indicator light shows the level of battery power on your B350-XT as follows:

Blue light: Fully charged. Over 24 hours’ talk time. Red light: Less than a full charge.

Headset Charging Port

AC Charger

Auto (DC) Charger

For best performance, keep charging headset when not in use.

Indicator Lights

VXi BlueParrott®B350-XT User Guide PAGE 7

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

The B350-XT headset will operate from battery power or from the AC or DC charger/adapter.

NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back to the phone.

When the headset is operating from the battery, all indicator lights and sounds will function as described in this guide.

When the headset is operating from the charger/adapter, the headset—including the audio indicators— will function as described in this user guide. However, the MFB lights will indicate the battery charge status.

While the headset is on the charger, press the MFB long enough to power the unit on. The headset should reconnect automatically unless your phone is set to “always ask” for connection requests.

After the battery is fully charged, the MFB charge light will turn blue and stay blue as long as the charger/adapter is connected to the headset. While the headset is fully charged and the charge light is blue, the blue indicator light will also be on if the headset is powered on.

VXi BlueParrott®B350-XT User Guide PAGE 8

+ 17 hidden pages