j5 create JUA210 User Manual [en, de, es, fr]

Download

User Manual

Manuel de l'utilisateur

Bedienungsanleitung

Manual del usuario

Kullanma Kılavuzu

USB VGA/DVI Display Adapter

JUA210/230

ユーザーマニュア

使用手冊

JUA210/230

USB VGA/DVI Display Adapter

User Manual

JUA210/230 V2.0

Table of Contents

INTRODUCTION .................................................................................................................... 3

Functions .............................................................................................................................. 3

Highlighted Features .......................................................................................................... 4

Required Environments ...................................................................................................... 5

Physical Specifications ...................................................................................................... 5

Resolutions and Color Depth ............................................................................................ 6

Package Contents ............................................................................................................. 8

GETTING STARTED –Notes for Before Installation ............................................................... 9

INSTALLATION FOR WINDOWS 7/Vista ............................................................................. 10

Device Driver Installation ................................................................................................ 10

Verify Device Driver Installation ..................................................................................... 17

Device Driver Un-installation .......................................................................................... 19

INSTALLATION FOR WINDOWS XP ..................................................................................... 21

Device Driver Installation ................................................................................................ 21

Verify Device Driver Installation ..................................................................................... 27

Device Driver Un-installation .......................................................................................... 30

INSTALLATION FOR MAC ................................................................ ................................ ... 32

Device Driver Installation ................................................................................................ 32

Verify Device Driver Installation ..................................................................................... 36

Device Driver Un-installation .......................................................................................... 37

FUNCTIONS INSTRUCTIONS: WINDOWS 7 ......................................................................... 39

Display ID ........................................................................................................................... 39

Display Resolution ............................................................................................................ 40

Display Orientation ........................................................................................................... 41

Identify Monitors ............................................................................................................... 46

Multi-Display Control Panel ............................................................................................ 46

Display Setting ................................................................................................................... 47

Fix Position.......................................................................................................................... 47

FUNCTIONS INSTRUCTIONS: WINDOWS VISTA/XP ............................................................ 48

Display ID ........................................................................................................................... 48

Display Rotation ................................................................................................................ 50

Display Mode .................................................................................................................... 50

Identify Monitor ................................................................................................................. 52

Multi-Display Control Panel ............................................................................................ 53

Display Setting ................................................................................................................... 54

Display Resolution ............................................................................................................ 55

Display Mode .................................................................................................................... 55

Windows Arrangement .................................................................................................... 56

TROUBLE SHOOTING .......................................................................................................... 59

REGULATORY COMPLIANCE ............................................................................................. 63

WARRANTY OF j5 create ................................................................................................... 64

USB DISPLAY ADAPTER USER MANUAL

INTRODUCTION

Thank you for purchasing the j5 create (JUA210 / JUA230) USB 2.0 Display Adapter! This adapter acts as an external graphics card for your MAC or

PC. It allows you to add an additional VGA(JUA210) or DVI(JUA230) monitor/display through your USB 2.0 port. No need to open up the computer to add an expensive graphics card, with the USB 2.0 Display Adapter you simply load the drivers, plug in the adapter to the USB port, then plug in the VGA or DVI monitor cable into the adapter and you are ready. The j5 create USB 2.0 Display Adapter supports three viewing modes. Primary mode, allows you to have individual applications open on each monitor, vastly improving productivity. Extended mode allows you to extend your desktop across multiple displays, great for spreadsheets. Mirroring mode is used to clone one screen onto another, ideal for presentations. With “Plug & Play” functionality between your computer and 2nd monitor or projector, you will be able to create a new visual environment in seconds.

In addition, j5 create has developed this compact design for the sophisticated user who cares about function as well as elegance.

Functions

 Add an additional monitor without adding an expensive, internal

video card, avoiding complicated installation

 Hot swappable USB enables you to add or remove monitors

without rebooting your system

 Move and view your large spreadsheets across two screens

without overlapping windows

 Multitask with larger landscape/desktop space  Ideal for viewing multiple windows at the same time  Great for multitasking in a wide variety of applications including:

Phone centers, Stock Markets, Hospitals, Graphic Design, Editing, Accounting, Etc.

 A must have for surfing the web and working on your

email/facebook/twitter accounts all at the same time.

Highlighted Features

 Supports display resolution:1920 x 1200 @ 32bit  Plug-and-Play USB connectivity  Allows for up to 4 adapters in Windows  Allows for up to 2 adapters in Mac  Supports Display Modes: Primary, Extended, Mirror  Display Rotation: 0°, 90°, 180°, 270°  Aluminum enclosure that is non-toxic and recyclable  Easy driver install  Friendly software:

o Identify Monitors o Multi-Display Control Panel o Shortcut to access Windows

Usage

Editor:

• Efficient editing of documentation on one screen and

Presentation:

• Use mirror mode while your laptop is plugged into a projector

• Use Primary mode to have two monitors and/or projectors for

Office:

• Dual display scenario: view large spreadsheets across 2 screens

• Independent: using desk space and doing multi-jobs at the same

o Display setting dialog

researching reference materials on the other

through the USB Display Adapter

creative displays

with display continuity. (For example: Excel document)

time- increase efficiency.

• Read and reply to email on one screen and open

attachments on the other

Graphics Workstation:

• Design and check reference material at the same time.

• More space for tablets and photo/video editing

Entertainment:

• Watch TV/Movie while searching the program preview

• Play games online on one screen with the strategy guide on the

other screen

QTY

1~2 Dongle

3～4 Dongles

CPU

Intel/AMD Dual core1.8 GHz or above

Intel / AMD QUAD CORE

2.4GHz or above

RAM

2 GB or Higher

4 GB or Higher

USB

An independent power supply is required when using the USB HUB to connect multiple dongles.

Model: JUA210

Interface

Host Interface

USB 2.0 Type-A Connector

Video Interface

VGA-DB 15 pin Female Connector

Power

Power Mode

Bus-powered

USB DISPLAY ADAPTER USER MANUAL

Stock Market Trading:

• Monitor multiple stock markets and market news simultaneously

Coding/Programming:

• Allows effective code programming on one screen and software

program companion on the other screen.

Required Environments

 Microsoft Windows 7, Vista, XP (32-bit or 64-bit) Compatible  Mac OS X Snow Leopard Compatible  Available USB 2.0 port  Temperature: Operating: -50°F~131°F

Non- Operating : -77°F~167°F

 Minimum System Requirements

This device is intended for ‘Office Applications’ and not for ‘Home Entertainment’ & ‘Video Playback‘.

note: Due to constant advancements in technology we, at j5 create, make it a priority to give you the latest drivers available for our products. To ensure that your device is equipped with the most current driver, please visit our website at www.j5create.com and install the latest driver for this model.

Physical Specifications

Power Consumption

≦500mA

Physical Specification

Housing Material

Aluminum

Dimensions

Main body: 54(W)x 93(H)x14(D) mm Cable length: 130 mm

Weight

Approximately 72g

Model: JUA230

Interface

Host Interface

USB 2.0 Type-A Connector

Video Interface

DVI-I Female Connector

Power

Power Mode

Bus-powered

Power Consumption

≦500mA

Physical Specification

Housing Material

Aluminum

Dimensions

Main body: 54(W)x 93(H)x14(D) mm Cable length: 130 mm

Weight

Approximately83g

Aspect Ratio

Resolution

Color Depth

Wide Screen Display

16:10

1920 X 1200

16,32 bits

16:9

1920 x 1080

16,32 bits

16:10

1680 x 1050

16,32 bits

16:9

1600 x 900

16,32 bits

16:10

1440 x 900

16,32 bits

16:9

1360 x 768

16,32 bits

16:10

1280 x 800

16,32 bits

15:9

1280 x 768

16,32 bits

16:9

1280 x 720

16,32 bits

Standard Display

Resolutions and Color Depth

4:3

1600 X 1200

16,32 bits

4:3

1400 x 1050

16,32 bits

5:4

1280 x 1024

16,32 bits

4:3

1280 x 960

16,32 bits

4:3

1152 x 864

16,32 bits

4:3

1024 x 768

16,32 bits

4:3

800 x 600

16,32 bits

USB DISPLAY ADAPTER USER MANUAL

USB VGA Display Adapter(JUA210) Quick Installation Guide Driver CD with E-Manual

USB DVI Display Adapter(JUA230) Quick Installation Guide Driver CD with E-Manual

Package Contents

USB DISPLAY ADAPTER USER MANUAL

GETTING STARTED –Notes for Before Installation

 Install driver completely before inserting the USB Display Adapter

USB Cable into your computer

 Run the setup program as an administrator to avoid errors in

installation

 Uninstall the previous driver first before updating the latest driver  Connect the VGA or DVI connector of USB Display Adapter to the

VGA or DVI cable of display device first before connecting to USB port of computer

 It is recommended to use an independent power supply for USB

Hub while multiple dongles are connected to the USB Hub

 The display screen will flash during installation

INSTALLATION FOR WINDOWS 7/Vista

Device Driver Installation

This section illustrates the procedure for device driver installation for Windows 7. To start, insert the Driver CD into your computer’s CD-ROM drive. The setup program should be launched automatically. If Autorun does not begin, go to “Computer”, Click on your optical drive, and manually run the setup CD by double-clicking on “Setup.exe”

※Please make sure the USB cable of USB Display Adapter is unplugged from your PC or Notebook before executing the installation program.

1. The installation page will be launched. To start click on “ Install the Latest

Driver”. Please make sure the network is available or press “Install Driver”

to start the installation

2. After pressing the installation option, the InstallShield Wizard will launch,

click Next> to continue

USB DISPLAY ADAPTER USER MANUAL

3. Read the license agreement and check “I accept the terms of the

license agreement.” Click Next > to accept it and continue.

4. Driver installation proceeding…..

5. When Install Shield Wizard is complete, select “Yes, I want to restart my

computer now.” Click Finish to restart.

USB DISPLAY ADAPTER USER MANUAL

6. After your computer is rebooted, connect the external display device

(monitor/ projector) to the VGA/DVI connector of the USB Display Adapter and turn on the display device.

7. Connect the USB Display Adapter into an available USB 2.0 port of a PC

or Notebook, After Inserting the USB Display Adapter into an USB 2.0 port,

the “Installing device driver software” message will pop up.

If the Driver software was installed successfully the following message should appear:

If you’re not going to install another USB Display Adapter, restart your PC. The functions of the USB Display Adapter will be activated after the computer restarted.

Multi USB Display Adapter Installation For installation of multiple USB Display Adapters, during the “Install Shield Wizard complete” step, select “No, I will restart my computer later.” and

click Finish to continue next step below

A. Connect all external display devices (monitor/ projector) to the

VGA/DVI connector of USB Display Adapters and switch power on.

B. Connect the USB Display Adapter into an available USB 2.0 port of a PC

or Notebook.

After Inserting an USB Display Adapter into a USB 2.0 port, the systems will automatically start the installation procedure and the prompt message will pop-up on the task bar.

The Device driver software was installed properly,

If you are going to install more USB Display Adapters, repeat step A& B or restart computer.

USB DISPLAY ADAPTER USER MANUAL

The functions of the USB Display Adapter will be activated after the computer restarted. You might see the extend display shown on the display device.

You can modify the corresponding position of each extend display via display settings. Go to “START” → “Control Panel” → “Appearance and Personalization” → “Adjust screen resolution”

※ Right-click on the desktop and go to “Screen Resolution”

When the ‘Screen Resolution’ window appears, each monitor’s number can be identified by clicking “Identify.” Drag the monitor to the location you want.

USB DISPLAY ADAPTER USER MANUAL

Verify Device Driver Installation

The following procedure helps you to verify the driver installation status of the USB Display Adapter.

Right-click “My Computer”  “Manager”  “Device Manager” click “+” sign of “Display Adapter”  “Universal Serial Bus controllers”

The picture below shows the installation process for a Single USB Display Adapter

The picture below shows the installation process for a Multiple USB Display Adapter

USB DISPLAY ADAPTER USER MANUAL

Device Driver Un-installation

※ Unplug the USB Display Adapter before un-installing the driver.

1. Click Start→ Control Panel → Programs and Feature→ Uninstall or

Change a Program Select j5 DIAPLAY ADAPTER... Click Uninstall

2. A message will appear asking if you want to remove the selected

application. Click ‘ok’ to continue.

3. Driver un-installation proceeding….

4. When the driver uninstall is completed select “Yes, I want to restart my

computer now.” Click Finish to restart .

USB DISPLAY ADAPTER USER MANUAL

INSTALLATION FOR WINDOWS XP

Device Driver Installation

This section illustrates the procedure for device driver installation for Windows XP. To start, insert the Driver CD into your computer’s CD-ROM drive. The setup program should be launched automatically. If Autorun does not begin, go to “Computer”, Click on your optical drive, and manually run the setup CD by double-clicking on “Setup.exe”

※Please make sure the USB Display Adapter is unplugged from your PC or Notebook before executing the installation program.

1. The installation page will be launched. To begin installation click on

“ Install the Latest Driver” , please make sure the network is available or press “Install Driver” to start the installation

2. After pressing the installation option, the InstallShield Wizard will launch,

click Next> to continue

3. Read the license agreement and check “I accept the terms of the

license agreement.” Click Next > to accept it and continue.

4. Driver installation proceeding…..

USB DISPLAY ADAPTER USER MANUAL

5. When Install Shield Wizard is complete, select “Yes, I want to restart my

computer now.” Click Finish to restart.

6. After your computer is rebooted, connect the external display device

(monitor/ projector) to the VGA/DVI connector of USB Display Adapters and turn it on.

7. Connect the USB Display Adapter into an available USB 2.0 port of a PC

or Notebook, After Inserting the USB Display Adapter into an USB 2.0 port, the “Installing device driver software” message will pop up.

An icon ( ) will be seen on the lower right toolbar. The message pictures below shows Driver software is installed successfully.

If you’re not going to install another USB Display Adapter, restart your PC. The functions of the USB Display Adapter will be activated after the computer restarted.

USB DISPLAY ADAPTER USER MANUAL

Multi-USB Display Adapter Installation For installation of multiple USB Display Adapters, during the “Install Shield

Wizard complete” step, select “No, I will restart my computer later.” and click Finish to continue next step below

A. Connect all external display devices (monitor/ projector) to the

VGA/DVI connector of USB Display Adapters and switch power on.

B. Connect the USB Display Adapter into available USB 2.0 port of PC

or Notebook.

After Inserting an USB Display Adapter into a USB 2.0 port, the systems will automatically start the installation procedure and the prompt message will pop-up on the task bar.

When Display Properties windows appears, each monitor’s number can be identified by clicking “

“ identify”

Drag the monitor to the location you want.

The Device driver software was installed properly, if you are going to install more USB Display Adapters, repeat step A & B or restart computer The functions of the USB Display Adapter will be activated after the computer restarted. You might see the mirror display shown on the display device. You can modify the corresponding position of each extend display via display settings. Go to “START” → “Control Panel” → “Display Properties” →“Settings”

USB DISPLAY ADAPTER USER MANUAL

Note:

If your internal graphics card is Dual Display Ports…..

1. When using Single USB Display Adapter

The display device which connected to the 2nd VGA port will be numbered 3rd monitor, the display device which connected to the USB

Display Adapter will be numbered 2nd monitor.

2. When using two USB Display Adapter

The display device which connect to the 2nd VGA port will be numbered 4th monitor, the display device which connected to the USB Display

Adapter will be numbered 2nd and 3rd monitor and so on…

Verify Device Driver Installation

The following procedure helps you to verify the driver installation status of USB Display Adapter

Right-click “My Computer”  “Manager”  “Device Manager” click “+” sign of “Display Adapter”  “Universal Serial Bus controllers”

The picture below shows the installation process for a

Single USB Display Adapter

The picture below shows the installation process for a Multiple USB Display Adapter

USB DISPLAY ADAPTER USER MANUAL

Device Driver Un-installation

※Unplug the USB Display Adapter before un-installing the driver

1. Click Start→ Control Panel → Programs and Feature→ Uninstall or

change a program

Select j5 DIAPLAY ADAPTER ... Click Uninstall

2. Confirm windows will pop out, Click to continue.

3. Driver un-installation proceeding….

USB DISPLAY ADAPTER USER MANUAL

4. When the driver uninstall is completed select “Yes, I want to restart my

computer now.” Click Finish to restart .

INSTALLATION FOR MAC

Device Driver Installation

Installing the device driver enables your computer’s operating system to recognize the USB Display Adapter. Be sure that you are referring to the appropriate installation procedure before you begin installing.

※ Make sure the USB cable of USB Display Adapter is unplugged from your Mac Desktop or Mac Notebook before executing the setup program.

This section illustrates the device driver installation procedure for a computer running Snow Leopard.

1. Insert the Driver CD into the CD-ROM drive

2. The installation page will be launched; To begin installation click on start

“ Get Last Driver online” , please make sure the networking is available or Choose the OS version you are using and press “Install Driver” to start the installation

USB DISPLAY ADAPTER USER MANUAL

3. Click “Continue” to proceed

4. Click “Continue” to proceed

5. Type in your password and click “OK”

6. Click “Continue Installation”

USB DISPLAY ADAPTER USER MANUAL

7. Installation is processing…This will take a few moments

8. Click “Restart” to complete the software installation

9. Connect the external display device (monitor/projector) to the VGA

connector of USBDisplay Adapter and turn on the display device

10. Plug the USB Display Adapter into the USB port of your Mac Desktop

or Mac Notebook. The screen will turn on automatically, and be in “Mirror Mode”

Verify Device Driver Installation

The following procedure helps you to verify the driver installation status of USBDisplay Adapter

1. GO , select “About This Mac” and select “ More Info…”

The picture below shows the installation process for a Single USBDisplay Adapter

The picture below shows the installation process for Multiple USBDisplay

Adapter

USB DISPLAY ADAPTER USER MANUAL

Device Driver Un-installation

1. Unplug the USB Display Adapter from the USB port

2. Run Un-installation program

3. Click “Open” to proceed

4. Click “Uninstall and restart” to proceed

5. Type in your password to allow un-

installation and click OK to proceed.

6. Click “restart “ restart your system

USB DISPLAY ADAPTER USER MANUAL

FUNCTIONS INSTRUCTIONS: WINDOWS 7

This section describes the many functions provided by the USB Display Adapter. Display device’ here means any number of things such as

CRT,LCD monitor, TV display, or projector.

Display ID

Smart Display Device ID Detection

Window 7 OS supports VESA defined DDC/EDID. It will be shown as the Display device ID whenever it is attached to the USB Display Adapter.

Display Resolution

Fast Access to Display Resolution setting

The resolution list will show when moving the cursor on Display Resolution. Select the resolution you want for the USB Display Adapter.

Default resolution: 1024 x 768 x 32 bit

USB DISPLAY ADAPTER USER MANUAL

Display Orientation

The Orientation allows you to turn the display device, which is connected to USB Display Adapter

Display Mode

Extended mode (Default)

This feature allows the display device attached to the USB Display Adapter

to work as an “extended” display of the on-board screen.

You can adjust the position by clicking “number” of the display first and select “Extend these displays” and click “Apply”

USB DISPLAY ADAPTER USER MANUAL

Mirror mode-Duplicate

This feature allows the same contents of the on-board screen to be displayed to the screen of the USB Display Adapter

You can select “Duplicate these displays” and click “Apply”

Primary mode

When you want to switch the enabled monitor as main display and extend view to on-board screen.

choose the “Number” of the main display you want it to be and make a “check” mark on “Make this my main display”.

USB DISPLAY ADAPTER USER MANUAL

Off mode

To turn one of the displays off:

Select “Show desktop only on 1” and the 2nd display will be off Select “Show desktop only on 2” and the 1st display will be off

Super Utility

A super utility provides more options; you can find the icon on the lower right task bar

Identify Monitors

When “Identify Monitors” is selected, a serial number will be shown at the upper right corner of the display devices. You can see the serial number of each display when using the Hotkey function.

Multi-Display Control Panel

This unique feature provides a simpler working experience for the multidisplay environments. A series of Hotkey setting helps move quickly between desired display devices.

※Using Hotkeys

Default setting is Ctrl + Display No. Click the window you want to move at the task bar to become active, and then press Hotkey

USB DISPLAY ADAPTER USER MANUAL

※Setting Hotkeys

For example: Move window to Display03, and automatically enlarge it to full screen.

Choose “Move Active Window to Display03”, check “Move Window and Full screen”, and click Apply

Display Setting Fast access to the system “Display Setting”

Fix Position

This function helps you arrange the positions of all the display locations you have set in Display > Screen Resolution. After Display Location set, make a

“Check” in this function. All display location will be fixed. It is great for multi-displayer user.

FUNCTIONS INSTRUCTIONS: WINDOWS VISTA/XP

You can choose all the functions simply and directly only by clicking on this

icon( ) seen on the lower right toolbar.

Display ID

Smart Display Device ID Detection

The USB Display Adapter supports VESA defined DDC/EDID. The utility should show the display device ID whenever it is attached to the USB Display Adapter.

If there is no display device attached to the USB Display Adapter the ID will show up as “Unknown Monitor.” If the attached display device does not support EDID, the ID will also be defined as “Unknown Monitor”.

The resolution list will be shown when moving the cursor on Display Resolution. Select the resolution you want for your display device which connected to USB Display Adapter.

USB DISPLAY ADAPTER USER MANUAL

Display Resolution

Default Resolution: 1024 x 768x 32 bit

The Display Rotation allows you to turn the display device, which is connected to USB Display Adapter. It is a useful function for some rotatable display device.

There are 4 options available: 0 degree/ 90 degrees/180 degrees/ 270 degrees under the Extended or Primary display mode.

Default display mode allows the attached USB Display Adapter enabled display device to work as “ Extended” display of the onboard screen. This extended working space feature improves work efficiency.

Display Rotation

Display Mode

Extended (Default Mode)

When Mirror selected, the screen of display device, which is connected to USB Display Adapter, will be the same as the main display, and Display Rotation will be disabled automatically.

You can select either “Horizontal Flip”, or “Vertical Flip”.

When Primary is selected, the display device, which is connected to USB Display Adapter, will become the main display, the display of the internal graphics card will automatically switch to be the extended display and act as an extension desktop.

USB DISPLAY ADAPTER USER MANUAL

Mirror Mode

Primary Mode

When Off selected, it will disable the display of the USB Display Adapter.

When Identify Monitors is selected, a serial number will be shown at the upper right corner of attached display device.

It helps you to know the serial number of each display, when using Hotkey function.

Off

Identify Monitor

When Multi-Display Control Panel is selected, the window of MultiDisplay Control Panel will pop-up to enable the modification of the hotkeys.

※ Using Hotkey

Default setting is Ctrl + Display No.

Click the window you want to move on task bar to become active, and then press Hotkey.

※ Setting Hotkey

For example: Move window to Display03, and automatically enlarge it to full screen.

Choose “Move Active Window to Display03”, check “Move Window and Full screen”, and click Apply to make it active.

USB DISPLAY ADAPTER USER MANUAL

Multi-Display Control Panel

Display Setting

Fast access to the system “Display Setting”

USB DISPLAY ADAPTER USER MANUAL

FUNCTIONS INSTRUTIONS: MAC SNOW LEOPARD

Display Resolution

Go to , and then “System Preferences

From “System Preferences” click on the “Display” tab. You should see this screen.

 On this screen, you can adjust the resolution, display mode and color

range.

Display Mode

Click on the “arrangement” tab, and uncheck “mirror display to un-Mirror the screen. You will automatically see another window appear on the screen that represents the USB Display Adapter.

 You can move the menu bar to any display to assign any display to

Primary.

 If you cannot see the Display window to adjust your secondary monitor

resolution, click on the “Gather Windows” button.

TIP: To simplify using the USB Display

Adapter, click “show display in menu bar.”

You will see the display icon that you can double-click on at any time.

Windows Arrangement

You can arrange Windows on display by “Expose & Spaces”

Go to , and then “System Preferences” From System Preferences click on “Exposé & Spaces.” You should see this screen.

USB DISPLAY ADAPTER USER MANUAL

 Space

Click “Show Spaces in menu bar.” You should see the space number on the menu bar that you can choose any space on the list at any time.

F8: you will see the Space Layout with a single keystroke. You can draw any window to other space.

 Exposé

View different windows with a single keystroke.

 F9 : view all open windows  F10: view windows of the current

application only

 F11: show desktop

*For more windows arrangement functions, please see Apple’s computer user manual.

USB DISPLAY ADAPTER USER MANUAL

TROUBLE SHOOTING

If you have any questions about using this device, follow the instructions below. If any further assistance is needed, please visit our website or call j5 create support hotline.

Known Issues

- Direct 3D is not supported under XP. It would be supported under Win

7 Aero mode

- The Print screen function in the extend display currently is not

supported under MAC OS. 10.6.

General Recommendations

- Incompatibilities exist when using other Video over USB Devices on a

single system. Please ensure that all other Video over USB drivers are uninstalled before continuing with j5 create installation.

- Check to make sure that the device is plugged in correctly to the host

system.

- Make sure that the USB port that you are using is USB Display Adapter.

- Unplug the USB cable of USB Display device and re-insert it.

- Check to see that the monitor is connected correctly and is powered

ON.

- Make sure to restart your computer after the driver installation.

- Try a different USB 2.0 port and/or computer.

- Unplug all other USB devices from the system.

- Try connecting the USB cable of USB Display device directly to the

computer instead of through a hub.

- Reset/refresh/resynchronize your monitor.

Media Playback

- During video playback on all platforms, please do not change the

display mode, position or arrangement of the video player window (such as dragging the video player window between the main display and attached display). This may cause the video player to stop playing. We suggest stopping the video playback, moving the

window to the USB graphics device attached display and then selecting the video clip to start playing.

- Cursor movement is slower when the mouse hovers on the video

region of the Flash player,

- Downsizing your screen landscape lower than 50 % will help smooth

out Jerky video playback for videos running in Full Screen Mode

- You may experience poor video performance on USB graphics

devices with low spec PC systems.

- Video rendering using hardware overlays is supported.

- Some DVD playback software packages do not support playing on a

second display adapter of any kind. You may try to open the media player in the secondary display first before you start playing the DVD.

- Your PC may lack certain media codec to support the playback of

certain video formats. Please use the link below to install license free media codec.

K- Lite: http://www.free-

codecs.com/download/K_Lite_Codec_Pack.htm

- Video/Media players have different decoding capabilities under

different display modes. For better performance watching DVDs or certain video formats on the attached USB graphics display attached, it is recommended to use the following license free software:

VLC Media Player: http://www.videolan.org/vlc/ Media Player Classic: http://sourceforge.net/projects/guliverkli/

Others

- Some graphics card, i.e. Intel, prevents other secondary graphics

chipset from being set as the primary card. As the result of this, primary mode might not work or the display maybe disabled.

- If you have problems during the boot up process, start your computer

in Safe Mode and uninstall the driver. Hold the CTRL key until the Windows startup menu appears and select Safe Mode.

- To verify the driver version that you installed, please click “Control

Panel” → “Add or Remove Programs” to check the program: USB

Display Device (Trigger 2) 9.xx.xxxx.0159 (the number means the driver version).

- Some limitation exists in different media player on file format support.

We enclose our compliance test result in the tables according to

USB DISPLAY ADAPTER USER MANUAL

different operating system, main system graphics card/chipset, media players, and the supported media format. It will be updated periodically with new version of media players or our latest driver.

TECHNICAL SUPPORT

If you have any issue using this product, please follow instruction below before returning this product to the store.

1. The User Manual

It contains the detail instruction and troubleshooting section; many common issues can be easily resolved by reading the user manual.

2. Online Support

Please visit j5 create website (www.j5create.com) to find the latest software for your device. If you still experience the same issue, you can submit a trouble description via email service@j5create.com . j5 create technical support team will reply you within the next 24 business hours.

3. Telephone Support

Please call us at 888-689-4088 and one of our support technicians will be very happy to assist you.

Customer Service:

Toll free number: 888-988-0488

Technical Support:

Toll free number: 888-689-4088

Email: service@j5create.com

Please contact Technical Support during business hours. 10:00 AM-6:00 PM E.S.T. Monday- Friday for further assistance.

REGULATORY COMPLIANCE

FCC

This equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 Class B.

Operation is subject to the following two conditions:

• This device may not cause harmful interference

• This device must accept any interference, including interference that may cause undesired

operation of the device.

CE This equipment is in compliance with the requirements of the following regulations: EN 55022 Class B (2006), EN 55024 (1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 (1995+A1:1998+A2:2001)/-3(2006)

C-Tick

This equipment is in compliance with the requirements of the following regulations: EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005.

VCCI

This equipment is in compliance with the requirements of the following regulations: CISPR22 © IEC: 2005

Disclaimer Information in this document is subject to change without notice. The manufacturer does not make

any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer.

WARRANTY OF j5 create

j5 create offers a limited 2-year warranty. User’s wear & tear damage are not

included.

The user shall call or email j5 create customer service with defect information of the product and obtain a return authorization number. Users are responsible for one way return freight cost and we will take care of one way freight back.

In order to obtain a return authorization, user should have the following information handy when calling or emailing the service team:

(i) a copy of original purchase invoice to verify your warranty (ii) a product serial number (iii) a description of the problem

(iv)a return Material authorization number

(v) customer’s Name, address, and telephone number

j5 create does not warrant that the operation of the product will be uninterrupted or error-free. j5 create is not responsible for damage arising from failure to follow

instructions relating to the product’s use. This warranty does not apply to:(a)

consumable parts, unless damage has occurred due to a defect in materials or workmanship; (b) cosmetic damage, including but not limited to scratches, dents ,and broken plastic on ports; (c) damage caused by use with non-j5 create products; (d) damage caused by acts of God (natural disasters, flood, fire, earthquake, lighting strike, typhoon etc.,)(e) damage caused by human misuse( lost, accident, abuse, misuse or other external causes) (f) damage caused by operating the product outside the permitted or intended uses described by j5 create ; (g) damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of j5 create or a j5 create Authorized Service Provider; (h) a product or part that has been modified to alter functionality or capability without the written permission of j5 create; or (i) if any j5 create serial number on the product has been removed or defaced.

If such a situation occurs, j5 create will calculate the cost of materials and repair for your reference.

This warranty is given by j5 create in lieu of any other warranties express or implied.

Copyright© 2011 j5 create. All rights reserved. All trade names are registered trademarks of their respective owners. Features and specifications are subject to change without notice. Product may not be exactly as shown in the diagrams.

Adaptateur d'affichage USB

Manuel de l'utilisateur

JUA210/230 V3.0

Table des matières

INTRODUCTION .................................................................................................................. 3

Fonctions .............................................................................................................................. 3

Principales caractéristiques ............................................................................................. 4

Environnements requis ....................................................................................................... 5

Caractéristiques physiques ............................................................................................... 5

Résolutions et profondeur des couleurs ......................................................................... 6

Contenu de l'emballage .................................................................................................. 8

MISE EN ROUTE – Remarques pour A vant l'installation ...................................................... 9

INSTALLAT IO N P O UR WINDOWS 7/VISTA ...................................................................... 10

Installation du pilote ......................................................................................................... 10

Vérification de l'installation du pilote ............................................................................ 16

Désinstallation du pilote .................................................................................................. 17

INSTALLATION POUR WINDOWS XP .................................................................................. 18

Installation du pilote ......................................................................................................... 18

Vérification de l'installation du pilote ............................................................................ 24

Désinstallation du pilote .................................................................................................. 26

INSTALLATION POUR MAC ................................................................................................ 28

Installation du pilote ......................................................................................................... 28

Vérification de l'installation du pilote ............................................................................ 32

Désinstallation du pilote .................................................................................................. 33

INSTRUCTIONS SUR LES FONCTIONS: WINDOWS 7 .......................................................... 35

ID de l'affichage ............................................................................................................... 35

Résolution d'affichage .................................................................................................... 36

Orientation de l'écran ..................................................................................................... 37

Identifier les moniteurs ..................................................................................................... 42

Panneau de contrôle multi-affichage ......................................................................... 42

Paramétrage de l'affichage .......................................................................................... 43

Position fixe ........................................................................................................................ 43

INSTRUCTIONS SUR LES FONCTIONS: WINDOWS VISTA/XP ............................................. 45

ID de l'affichage ............................................................................................................... 45

Rotation de l'affichage ................................................................................................... 47

Mode d'affichage ............................................................................................................ 47

Identifier le moniteur ........................................................................................................ 49

Panneau de contrôle multi-affichage ......................................................................... 50

Paramétrage de l'affichage .......................................................................................... 51

INSTRUTIONS SUR LES FONCTIONS: MAC SNOW LEOPARD ............................................. 53

Résolution d'affichage .................................................................................................... 53

Mode d'affichage ............................................................................................................ 53

Organisation des fenêtres ............................................................................................... 54

CONFORMITÉ RÉGLEMENTAIRE ........................................................................................ 60

GARANTIE DE j5 create ..................................................................................................... 62

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

INTRODUCTION

Merci d'avoir acheté l'Adaptateur d'affichage USB 2.0 j5 create (JUA210 / JUA230)! Cet adaptateur agit comme une carte vidéo externe pour votre

MAC ou PC. Il vous permet d'ajouter un moniteur/affichage VGA (JUA210) ou DVI (JUA230) supplémentaire via votre port USB 2.0. Pas besoin d'ouvrir l'ordinateur pour ajouter une carte vidéo coûteuse, avec l'Adaptateur d'affichage USB 2.0 il vous suffit de charger les pilotes, brancher l'adaptateur sur le port USB, puis brancher le câble du moniteur VGA ou DVI dans l'adaptateur et vous êtes prêt. L'Adaptateur d'affichage USB 2.0 j5 create prend en charge trois modes de visualisation. Le mode Principal, vous permet d'avoir des applications individuelles ouvertes sur chaque moniteur, ce qui améliore grandement la productivité. Le mode Etendu vous permet d'étendre votre bureau sur plusieurs écrans, idéal pour les feuilles de calcul. Le mode Miroir est utilisé pour cloner un écran sur un autre, idéal pour les présentations. Avec la fonctionnalité « Plug & Play » entre votre ordinateur et le 2ème moniteur ou projecteur, vous serez en mesure de créer un nouvel environnement visuel en quelques secondes.

En outre, j5 create a développé ce design compact pour l'utilisateur averti qui se soucie des fonctions ainsi que de l'élégance.

Fonctions

 Ajouter un moniteur supplémentaire sans l'ajout d'une carte vidéo

interne coûteuse, évitant ainsi une installation compliquée

 L'USB échangeable à chaud vous permet d'ajouter ou de

supprimer des moniteurs sans avoir à redémarrer votre système

 Déplacez et consultez vos grandes feuilles de calcul sur deux

écrans sans fenêtres superposées

 Multitâche avec paysage/espace de bureau plus grand  Idéal pour l'affichage de plusieurs fenêtres simultanément  Idéal pour le multitâche dans une grande variété d'applications,

notamment: Centres de téléphone, marchés boursiers, hôpitaux, conception graphique, édition, comptabilité, etc.

 Un must pour surfer sur le web et travailler sur vos comptes de

messagerie/facebook/twitter simultanément.

Principales caractéristiques

 Prend en charge la résolution d'affichage: 1920 x 1080 @ 32 bits  Connectivité USB Plug & Play  Permet jusqu'à 4 adaptateurs dans Windows  Permet jusqu'à 2 adaptateurs dans MAC  Prend en charge les modes d'affichage: Principal, Etendu, Miroir  Rotation de l'affichage: 0°, 90°, 180°, 270°  Boîtier en aluminium non-toxique et recyclable  Installation aisée des pilotes  Logiciel convivial:

o Identifier les moniteurs o Panneau de contrôle multi-affichage o Raccourci pour accéder à Windows

Utilisation

Editeur:

• Edition efficace de la documentation sur un écran et recherche

Présentation:

• Utilisez le mode Miroir pendant que votre ordinateur portable est

• Utilisez le mode Principal pour avoir deux moniteurs et/ou

Bureau:

• Scénario à double affichage: Afficher de grandes feuilles de

o Boîte de dialogue de paramétrage de l'affichage

de matériels de référence sur l'autre

branché sur un projecteur via l'Adaptateur d'affichage USB

projecteurs pour des affichages créatifs

calcul sur 2 écrans avec continuité d'affichage. (Par exemple: Document Excel)

• Indépendant: le fait d'utiliser l'espace du bureau et de faire

plusieurs travaux simultanément, permet d'accroître l'efficacité.

• Lisez et répondez aux e-mails sur un écran et ouvrez les pièces

jointes sur l'autre

Station de travail graphique:

• Dessinez et consultez le matériel de référence en même temps.

• Plus d'espace pour les tablettes et l'édition de photo/vidéo Loisirs:

• Regarder la TV/film tout en cherchant sur le programme

QTE

1~2 Dongle

3~4 Dongles

RAM

Une alimentation électrique indépendante est requise

Modèle: JUA210

Interface

Interface hôte

Connecteur USB 2.0 Type A

Interface vidéo

Connecteur femelle VGA-DB 15 broches

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

• Jouer en ligne sur un écran avec le guide de stratégie sur l'autre

écran

Opérations boursières:

• Surveillez plusieurs marchés boursiers et les nouvelles des

marchés simultanément

Codage/Programmation:

• Permet la programmation efficace de code sur un écran et un

logiciel compagnon sur l'autre écran.

Environnements requis

 Compatible Microsoft Windows 7, Vista, XP (32 bits ou 64 bits)  Compatible Mac OS X Snow Leopard /Lion  Port USB 2.0 disponible  Température: En fonctionnement: -50°F~131°F (-45°C à 55°C)

Au repos: -77°F~167°F (-60°C à 75°C)

 Configuration minimale requise

Intel / AMD cœur Dual

Intel / AMD cœur Quad 2,4

CPU

1,8 GHz ou supérieur

GHz ou supérieur

2 Go ou plus 4 Go ou plus

USB

lorsque vous utilisez le concentrateur USB pour connecter plusieurs dongles.

Cet appareil est conçu pour les « Applications de bureau » et non pas pour les « Divertissements domestiques. »

Note: Grâce aux progrès constants de notre technologie, J5 créate donne une priorité pour vous donner les derniers pilotes disponibles pour nos produits. Afin de s'assurer que votre appareil est équipé du pilote le plus récent, s'il vous plaît visitez notre site Web sur www.j5create.com et installer le dernier pilote pour ce modèle.

Caractéristiques physiques

Alimentation

Mode

Alimenté par le bus Consommation

≦

Caractéristiques physiques

Matériau du boîtier

Aluminium

Dimensions

Corps: 54 (l) x 93 (H) x 14 (P) mm Poids

Environ 72g

Modèle: JUA230

Interface

Interface hôte

Connecteur USB 2.0 Type A

Interface vidéo

Connecteur femelle DVI-I

Alimentation

Mode

Alimenté par le bus Consommation

≦

Caractéristiques physiques

Matériau du boîtier

Aluminium

Dimensions

Corps: 54 (l) x 93 (H) x 14 (P) mm Poids

Environ 78g

Format de l'image

Résolution

Profondeur des couleurs

Écran large

d'alimentation

500mA

Longueur du câble: 130 mm

d'alimentation

500mA

Longueur du câble: 130 mm

Résolutions et profondeur des couleurs

16:9 1920 x 1080 16, 32 bits

16:10 1680 x 1050 16, 32 bits

16:9 1600 x 900 16, 32 bits

16:10 1440 x 900 16, 32 bits

16:9 1360 x 768 16, 32 bits

Affichage standard

4:3

800 x 600

16, 32 bits

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

16:10 1280 x 800 16, 32 bits

15:9 1280 x 768 16, 32 bits

16:9 1280 x 720 16, 32 bits

4:3 1400 x 1050 16, 32 bits 5:4 1280 x 1024 16, 32 bits

4:3 1280 x 960 16, 32 bits

4:3 1152 x 864 16, 32 bits

4:3 1024 x 768 16, 32 bits

Adaptateur d'affichage VGA USB

Adaptateur d'affichage DVI USB

Contenu de l'emballage

(JUA210) Guide d'installation rapide CD de pilotes avec E-manuel

(JUA230) Guide d'installation rapide CD de pilotes avec E-manuel

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

MISE EN ROUTE – Remarques pour Avant l'installation



Installez entièrement le pilote avant d'insérer le câble USB de

l'Adaptateur d’affichage USB dans votre ordinateur

 Exécutez le programme d'installation en tant qu'administrateur

pour éviter des erreurs d'installation

 Désinstallez le pilote précédent avant de mettre à jour le dernier

pilote

 Branchez d'abord le connecteur VGA ou DVI de l'Adaptateur

d’affichage USB au câble VGA ou DVI du dispositif d'affichage

avant de le brancher au port USB de l'ordinateur

 Il est recommandé d'utiliser une alimentation indépendante pour

le concentrateur USB lorsque plusieurs dongles sont connectés au concentrateur USB

 L'écran clignote lors de l'installation

INSTALLATION POUR WINDOWS 7/VISTA

Installation du pilote

Cette section illustre la procédure d'installation du pilote pour Windows 7. Pour commencer, insérez le CD de pilotes dans le lecteur de CD-ROM de votre ordinateur. Le programme d'installation devrait se lancer automatiquement. Si l'exécution automatique ne démarre pas, allez à «Poste de travail», cliquez sur votre lecteur optique, et lancez manuellement le CD d'installation en double-cliquant sur «Setup.exe»

※Assurez-vous que le câbleUSB de l'Adaptateur d’affichage USB VGA est débranché de votre PC ou de votre ordinateur portable avant d'exécuter le programme d'installation.

1. La page d'installation sera lancée. Pour commencer installation,

cliquez sur “ Installer le dernier pilote”. Assurez-vous que le réseau est disponible appuyez sur “Installer le pilote” pour démarrer l'installation

2. Après avoir appuyé sur l'option d'installation, l'assistant d'installation va

se lancer, cliquez sur Suivant> pour continuer

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

3. Lisez le contrat de licence et cochez la case «J'accepte les termes du

contrat de licence.» Cliquez sur Suivant > pour l'accepter et continuer.

4. procédure d'installation du pilote…..

5. Lorsque l'assistant d'installation est terminé, sélectionnez «Oui, je veux

redémarrer mon ordinateur maintenant.» Cliquez sur Terminer pour

redémarrer.

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

6. Après le redémarrage de votre ordinateur, connectez le dispositif

d'affichage externe (moniteur / projecteur) au connecteur VGA de l'Adaptateur d’affichage USB VGA et allumez le dispositif d'affichage.

7. Connectez l'Adaptateur d’affichage USB VGA dans un port USB

disponible d'un PC ou d'un ordinateur portable, après avoir inséré l'Adaptateur d’affichage USB VGA dans un port USB, le message «Installation du pilote» apparaît.

Si le pilote a été installé avec succès le message suivant doit apparaître:

Si vous ne désirez pas installer un autre Adaptateur d'affichageUSB VGA, redémarrez votre PC. Les fonctions de l'Adaptateur d'affichageUSB VGA seront activées après le redémarrage de l'ordinateur.

Installation de plusieurs Adaptateurs d'affichageUSB VGA

Pour l'installation de plusieurs Adaptateurs d'affichageUSB VGA, au cours de l'étape «Installation de l'assistant d'installation terminée», sélectionnez «Non, je redémarrerai mon ordinateur plus tard.» et cliquez sur Terminer pour continuer par l'étape suivante ci-dessous

A. Connectez tous les périphériques d'affichage externes (moniteur /

projecteur) au connecteur VGA des Adaptateurs d'affichageUSB

VGA et mettez sous tension.

B. Connectez l'Adaptateur d'affichageUSB VGA dans un port USB

disponible d'un PC ou d'un ordinateur portable.

Après avoir inséré un Adaptateur d'affichageUSB VGA dans un port USB, les systèmes lanceront automatiquement la procédure d'installation et le message d'invite apparaîtra sur la barre des tâches.

Le pilote a été correctement installé,

si vous comptez installer plus d'Adaptateurs d'affichageUSB VGA, répétez les étapes A et B ou redémarrez l'ordinateur.

Les fonctions de l'Adaptateur d'affichageUSB VGA seront activées après le redémarrage de l'ordinateur. L'affichage étendu devrait apparaître sur le dispositif d'affichage.

Vous pouvez modifier la position correspondante de chaque extension d'affichage via les paramètres d'affichage. Allez à «DEMARRER» → «Panneau de configuration» → «Apparence et personnalisation» → «Modifier la résolution de l'écran»

※ Faites un clic droit sur le bureau et allez à «Résolution de l'écran»

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

Lorsque la fenêtre «Résolution de l'écran » apparaît, chaque numéro de moniteur peut être identifié en cliquant sur «Identifier.» Faites glisser le moniteur à la position désirée.

Vérification de l'installation du pilote

La procédure suivante vous permet de vérifier l'état de l'installation du pilote de l'Adaptateur d'affichage USB.

Faites un clic droit sur « Poste de travail »  « Gérer »  « Gestionnaire de

périphériques » cliquez sur le signe « + » de « Cartes graphiques » « Contrôleurs de bus USB »

L'image ci-dessous montre le processus d'installation pour un seul Adaptateur d'affichage USB



L'image ci-dessous montre le processus d'installation pour plusieurs Adaptateurs d'affichage USB

ADAPTATEUR D'AFFICHAGE USB MANUEL DE L'UTILISATEUR

Désinstallation du pilote

※ Débranchez l'Adaptateur d'affichage USB avant de désinstaller le pilote.

1. Cliquez sur Démarrer → Panneau de configuration → Programmes et

fonctionnalités → Désinstaller ou modifier un programme

Sélectionnez j5 DISPLAY ADAPTER... Cliquez sur Désinstaller

2. Un message apparaîtra demandant si vous souhaitez supprimer

l'application sélectionnée. Cliquez sur « OK » pour continuer.

3. Désinstallation du pilote en cours….

4. Quand l'installation du pilote est terminée, sélectionnez « Oui, je veux

redémarrer mon ordinateur maintenant ». Cliquez sur Terminer pour

redémarrer.