j5 create JEE251 User Manual

2.5" SATA to USB 3.0 External
Hard Drive Enclosure

JEE251

Setup

1.Open the external hard drive enclosure and
connect the 2.5" SATA hard drive to the
SATA connector on the circuit board.

2.Place the SATA hard drive in the back
cover of the hard drive enclosure.

System Requirements

• Microsoft Windows 8.1/ 8/ 7/ Vista/ XP/2000

(32-bit or 64-bit) Windows Server compatible

• Mac OS X

• Linux OS

• Available USB port (USB 3.0 is recommend)

Mac Windows Linux Compatible

Shockproof rubber casing

prevents vibration

Free

3.Put the front of the hard drive enclosure on
top and fasten the two screws.

STOP!!

1. The User Manual

Contains detailed instructions and a troubleshooting section, many common issues can be
easily resolved by reading the user manual.

2. Online Support

Please visit the j5create website (www.j5create.com) to find the latest software for your device.
If you are still experiencing issues, you can submit a trouble ticket through our j5 web support.

Your ticket will be responded within 24 hours.

3. Telephone Support

Please call us @ [phone] and one of our support technicians will be very happy to
assist you.We stand behind our products and it is our goal to provide you with world class

support.

TECHNICAL SUPPORT

Toll free number : [phone]
Business Ho urs: Mon. – Fri. 10:00 a.m – 7:00 p.m E .S.T
Email: ser vice@j 5create.com

4.Place the rubber casing around the hard
drive enclosure.

If you have any issues using this
product, please try the instructions
below before returning the product.