Its telecom PANCAM-T ACCESS CONTROL DOOR PHONES SYSTEM, PANCODE ACCESS CONTROL DOOR PHONES SYSTEM, PANCAM-C ACCESS CONTROL DOOR PHONES SYSTEM, PANTEL ACCESS CONTROL DOOR PHONES SYSTEM User Manual
ACCESS
CONTROL
DOOR PHONES
Installation and
Programming Manual
for
PanCam-C
PanCam-T
Pantel
Pancode
PanCam-C
PanCam-T
Pantel
Pancode
Installation and Programming Manual
Release 3, May 2003
NOTICE
This manual describes the PanCam/Pantel/Pancode Access
Control Door Phones system.
Additional copies of this manual may be obtained from ITS .
No part of this document may be reproduced or transmitted in
any form, by any means (electronic, photocopying, recording,
or otherwise) without the prior written permission of ITS.
ITS reserves the right to modify the hardware and software
described in the manual without prior notice. However,
changes made to the hardware or software described does not
necessarily render this publication invalid.
WARRANTY
In the event that the product proves to be defective in
workmanship or materials within a period of one year from
date of shipment, ITS shall repair or replace the product at its
discretion. Transportation will be the responsibility of the
dealer/distributor. Under no circumstances shall ITS be
liable for consequential or special damages, loss of revenue
or user/dealer expenses arising out of or in connection with
the use or performance of the product, whether based on
contract, tort, or any other legal agreement.
The following shall void the above warranty: malfunctions
resulting from fire, accident, neglect, abuse, or acts of God;
use of improper electrical power; or repair of, tampering with
or alteration of the product by anyone other than ITS
authorized personnel.
Table of Contents
1 Introduction ...................................................1
1.1 PanCam............................................................1
1.2 Pantel................................................................4
1.3 Pancode............................................................6
2 Installation......................................................9
2.1 Installation Instructions....................................9
2.2 Adjacent Access Control Device ...................12
2.3 Connection Schematic....................................14
2.4 Volume Control..............................................14
3 Programming...............................................15
3.1 Day/Night Mode Selection.............................15
3.2 Entering Programming Mode.........................15
3.3 Resetting the PanCam/Pantel/Pancode ..........16
3.4 PanCam-T/Pantel Setup and Operation .........16
3.5 PanCam-C/Pancode Setup .............................18
3.6 Entering Special DTMF Characters...............23
4 Specifications................................................25
4.1 General Specifications ...................................25
4.2 Camera Specifications....................................26
5 Comparison Table .......................................29
1 Introduction
ITS offers a wide range of Access Control Door Phones for
indoor and outdoor entry control. These solutions range from
the simplest one button unit to the most sophisticated unit with
a full keypad and built-in camera to monitor visitors at the
entrance. All of ITS’s Access Control Door Phones
incorporate cutting edge technology, providing a high quality
speakerphone and a built-in electric lock control. All ITS’s
Access Control Door Phones are easy to set-up, modern and
durable in design and provide “plug and play” installation.
This guide provides installation and programming instructions
for the following products:
• PanCam unit
• Pantel Outdoor unit
• Pantel Indoor unit
• Pancode Outdoor unit
• Pancode Indoor unit
1.1 PanCam
The PanCam unit is available in two versions: PanCam-C
(with keypad) and PanCam-T (one button). Both are wall
mounted access control door phones, connected to an analog
port of a PBX or a Key Telephone System, with an internal
black & white or color high-quality pinhole camera encased
within the unit. Both, PanCam-C and T are vandal and weather
resistant, suitable for outdoor installation.
General Features
The PanCam controls the camera, providing three different
modes of operation:
• Always on
• Powered by pressing any button
• Powered by pressing the call button
Calling the PanCam unit from any extension will activate its
camera, enabling the door supervisor to see who is in the direct
neighbourhood of the unit.
PanCam-C Features
The PanCam-C unit has the following features:
• Direct dialing to any extension
• Speed-dial to internal or external subscribers
• Automatic Busy & Disconnect Cadence Detection
• Door opening from any extension
PanCam/Pantel/Pancode Installation and Programming Manual 1
Introduction
• Programmable day and night destinations
• Two different operation modes, standard/speed-dial
• High quality speaker phone with volume control
• Entry access code
• Works in conjunction with card readers and security
devices
• Simple to operate and program
• Smart looking durable design
• Internal black & white or color high-quality pinhole
camera
PanCam-T Features
The PanCam-T unit has the following features:
• Dialing to a pre-defined extension/subscriber
• Door opening from any extension
• Programmable day and night destinations
• Automatic Busy & Disconnect Cadence Detection
• Designed for wall mounting
• Works in conjunction with card readers and security
devices
• High quality speaker phone with volume control
• Simple to operate and program
• Internal black & white or color high-quality pinhole
camera
2
PanCam/Pantel/Pancode Installation and Programming Manual
button
PanCam Physical Description
The following figure describes both units.
Speaker
Camera
Introduction
Key-pad
Microphone
Call
PanCam-C
Figure 2-1. PanCam Front Panel
The front panel of the PanCam-T unit incorporates a speaker
and a Call button. The microphone can be found at the bottom
of the unit. The PanCam-C unit also features a keypad. The
front panel is attached to the wall using a bracket and screws.
The PanCam units are hardwired units, powered by an external
12V AC transformer, included in the package.
Optionally, you may use a 12-24V DC adapter.
PanCam-T
PanCam/Pantel/Pancode Installation and Programming Manual 3
Introduction
1.2 Pantel
The Pantel is a wall mounted access control door phone, which
is connected to an analog port of a PBX or a Key Telephone
System. The Pantel is compatible with most known telephone
systems and PBX types.
With the press of a button, the Pantel dials a pre-defined
extension number of up to 20 digits, allowing a conversation
to take place and then enables the dialed party to open the door
for the caller by pressing touch tone digit(s).
The Pantel is available in either an aluminum unit for outdoor
installation, which is weather and vandal resistant, or a plastic
unit for indoor installation.
Features
The outdoor and indoor Pantel units have the following
features:
• Dialing to a pre-defined extension/subscriber
• Door opening from any extension
• Programmable day and night destinations
• Automatic Busy & Disconnect Cadence Detection
(outdoor unit only)
• Designed for wall mounting
• Works in conjunction with card readers and security
devices
• High quality speaker phone with volume control
• Simple to operate and program
• Outdoor or indoor installation
4
PanCam/Pantel/Pancode Installation and Programming Manual
Physical Description
Speaker
Call
button
Introduction
Microphone
Outdoor Unit
Figure 1-2. Pantel Front Panel
Indoor Unit
The front panel of the Pantel unit incorporates a speaker and a
Call button. The microphone can be found at the bottom of the
unit. The front panel is attached to the wall using a bracket and
screws.
The Pantel unit is a hardwired unit powered by an external
12V AC transformer, included in the package.
Optionally, you may use a 12-24V DC adapter (for outdoor
unit only).
PanCam/Pantel/Pancode Installation and Programming Manual 5
Introduction
1.3 Pancode
The Pancode is a smart wall mounted access control door
phone that is connected to an analog port of a PBX or a Key
Telephone System, allowing door entry control.
The Pancode is available in either an aluminum unit for
outdoor installation, which is weather and vandal resistant, or
a plastic unit for indoor installation.
Features
The outdoor and indoor Pancode units have the following
features:
• Direct dialing to any extension
• Entry access code
• Speed-dial to internal or external subscribers
• Automatic Busy & Disconnect Cadence Detection
(outdoor unit only)
• Door opening from any extension
• Programmable day and night destinations
• Two different operation modes, standard/speed-dial
• High quality speaker phone with volume control
• Outdoor or indoor installation
• Works in conjunction with card readers and security
devices
• Simple to operate and program
• Smart looking durable design
6
PanCam/Pantel/Pancode Installation and Programming Manual
Physical Description
Speaker
Keypad
button
Cancel
button
Introduction
Call
Outdoor Unit
Figure 1-3. Pancode Front Panel
Indoor Unit
The front panel of the Pancode unit incorporates a speaker and
a keypad. The microphone can be found at the bottom of the
unit. The front panel is attached to the wall using a bracket and
screws.
The Pancode unit is a hardwired unit powered by an external
12V AC transformer, which is provided in the package.
Optionally, you may use a 12-24V DC adapter (For outdoor
unit only)
PanCam/Pantel/Pancode Installation and Programming Manual 7
Loading...