Isuzu GPS, Navigation Navigation User Manual
User’s Manual
Navigation
Thank you for purchasing the Isuzu Satellite Navigation as your in-truck navigator!
This satellite navigation is very simple to use; however, we still recommend that you read
this manual to fully familiarize yourself with the many useful features it contains.
Easy navigation map updates
Your Isuzu navigation software comes prepacked with 3 years of free map updates from
date of purchase. It is easy to keep the navigation software up to date. Simply download
the Toolbox application and set up your login at www.naviextras.com, then insert you
navigation memory card into your computer, and run the Toolbox application to download
new map data.
Disclaimer
This product is intended to be used only as a travel aid and must not be used for any purpose
requiring precise measurement of direction, distance, location or topography.
Directed Electronics OE and/or Isuzu Australia Limited makes no warranty as to the accuracy
or completeness of map data in this product.
In no event shall Directed Electronics and Isuzu Australia Limited be liable for any incedental,
special, indirect or consequential damages (including any vehicle repairs or damages
allegedly caused or asscociated with this product), whether resulting from the use, misuse
or inability to use this product or from defects in the product.
2
Table of contents
1 Warnings and Safety information ...............................................................................6
2 Getting started ...............................................................................................................6
2.1 Navigation menu ................................................................................................................... 8
2.2 Hardware buttons ................................................................................................................. 9
2.3 Buttons and other controls on the screen .............................................................................9
2.3.1 Using keyboards.........................................................................................................................11
2.3.2 Beyond single screen tap ............................................................................................................12
2.4 Map screen .......................................................................................................................... 13
2.4.1 Navigating on the map ............................................................................................................... 13
2.4.2 Position markers......................................................................................................................... 15
2.4.2.1 Vehimarker and Lock-on-Road .......................................................................................................... 15
2.4.2.2 Selected map location (Cursor) and selected map object .................................................................. 15
2.4.3 Objects on the map ..................................................................................................................... 15
2.4.3.1 Streets and roads ............................................................................................................................... 15
2.4.3.2 Turn preview and Next street ............................................................................................................. 16
2.4.3.3 Lane information and Signposts ........................................................................................................ 17
2.4.3.4 Junction view ..................................................................................................................................... 18
2.4.3.5 Motorway exit services ...................................................................................................................... 18
2.4.3.6 3D object types .................................................................................................................................. 19
2.4.3.7 Elements of the active route ............................................................................................................... 19
2.4.4 Manipulating the map ................................................................................................................ 20
2.4.5 Quick menu ................................................................................................................................ 21
2.4.6 Checking the details of the current position (Where Am I?) ...................................................... 23
3 On-road navigation ..................................................................................................... 26
3.1 Selecting the destination of a route ....................................................................................26
3.1.1 Combined Search .......................................................................................................................26
3.1.1.1 Combined Search - Navigating to a recent destination (History) .......................................................29
3.1.1.2 Combined Search - Navigating to a Favourite destination ................................................................ 30
3.1.1.3 Combined Search - Navigating to an address .................................................................................... 31
3.1.1.4 Combined Search - Navigating to an intersection ............................................................................. 32
3.1.1.5 Combined Search - Navigating to a Place of Interest ........................................................................ 33
3.1.1.6 Combined Search - Navigating to a Place of Interest by its category ................................................ 34
3.1.2 Entering an address or a part of the address ............................................................................... 35
3.1.2.1 Entering an address ........................................................................................................................... 35
3.1.2.2 Entering an address starting with the street name ..................................................................... ........ 38
3.1.2.3 Entering the midpoint of a street as the destination ........................................................................... 40
3.1.2.4 Selecting an intersection as the destination ....................................................................................... 41
3
3.1.2.5 Selecting a city/town centre as the destination .................................................................................. 43
3.1.2.6 Entering an address with a postal code ................................................................................ ............. 45
3.1.2.7 Tips on entering addresses quickly .................................................................................................... 47
3.1.3 Selecting the destination from the Places of Interest ................................................................. 47
3.1.3.1 Quick search for a Place of Interest ...................................................................................................48
3.1.3.2 Searching for a Place of Interest using preset categories ...................................................................49
3.1.3.3 Searching for a Place of Interest by category .................................................................................... 51
3.1.3.4 Searching for a Place of Interest by name ......................................................................................... 54
3.1.3.5 Selecting nearby assistance from 'Where Am I?' ............................................................................... 57
3.1.4 Selecting a map location as the destination ................................................................................ 59
3.1.5 Selecting the destination from your Favourites ..........................................................................60
3.1.6 Selecting one of the most likely destinations (Smart History) ................................................... 61
3.1.7 Selecting a recent destination from the History .........................................................................62
3.1.8 Entering the coordinate of the destination.................................................................................. 63
3.1.9 Building a route from the list of destinations (Create Route) .................................................. .. 64
3.2 Viewing the entire route on the map ................................................................................... 65
3.3 Checking route parameters and accessing route related functions .................................... 66
3.4 Modifying the route ............................................................................................................67
3.4.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination ..... 67
3.4.2 Setting a new starting position for the route ............................................................................. 68
3.4.3 Editing the list of destinations (Edit Route) ..............................................................................69
3.4.4 Pausing the active route ............................................................................................................70
3.4.5 Cancelling the active route ........................................................................................................ 70
3.4.6 Checking route alternatives when planning the route ............................................................... 71
3.4.7 Checking route alternatives for an existing route .......................................................................72
3.4.8 Changing the vehicle used in route planning .............................................................................73
3.4.9 Changing the road types used in route planning ........................................................................ 74
3.5 Saving a location as a Favourite destination ..................................................................... 75
3.5.1 Editing the details of a Favourite destination ............................................................................75
3.6 Saving a map location as an alert point ............................................................................. 76
3.7 Editing an alert point .......................................................................................................... 77
3.8 Watching the simulation of the route .................................................................................. 78
4 Off-road navigation ..................................................................................................... 80
4.1 Selecting the destination of the route .................................................................................80
4.2 Navigating in off-road mode...............................................................................................80
5 Truck navigation ......................................................................................................... 81
5.1 Setting up vehicle parameters ............................................................................................. 82
5.2 Setting up waiting time at waypoints ..........................................................................84
4
5.3 Setting up driving time alerts............................................................................................. 85
6 Reference Guide .........................................................................................................87
6.1 Concepts ............................................................................................................................ 87
6.1.1 Smart Zoom .............................................................................................................................87
6.1.2 Daytime and night colour themes ............................................................................................ 87
6.1.3 Tunnel view .............................................................................................................................87
6.1.4 Route calculation and recalculation .........................................................................................88
6.1.5 Road safety cameras and other proximity alert points .............................................................89
6.1.6 Speed limit warning ................................................................................................................. 90
6.1.7 GPS position quality indicator and current time ......................................................................90
6.2 'More' menu ....................................................................................................................... 91
6.3 Settings menu ..................................................................................................................... 92
6.3.1 Sound and Warnings ................................................................................................................ 94
6.3.2 Customise Quick menu ............................................................................................................96
6.3.3 Driving time management ........................................................................................................96
6.3.4 Route settings ...........................................................................................................................97
6.3.5 User profiles ............................................................................................................................100
6.3.6 Map settings ............................................................................................................................101
6.3.7 Visual guidance settings..........................................................................................................102
6.3.8 Display settings .......................................................................................................................104
6.3.9 Regional settings .....................................................................................................................104
6.3.10 Trip monitor settings .............................................................................................................105
6.3.11 Log collection settings ..........................................................................................................105
7 Glossary .....................................................................................................................106
8 End User Licence Agreement ..................................................................................108
9 Copyright note ..........................................................................................................114
5
1 Warnings and Safety information
The navigaon system helps you find your way to your desnaon with the built-in GPS receiver.
Isuzu navigaon does not transmit your GPS posion; others cannot track you. If you accept it when
first using the applicaon, Isuzu navigaon collects usage informaon and GPS logs that may be used
for improving the applicaon and the quality and coverage of maps.
The data is processed anonymously; no one will be able to track any personal informaon.
If you change your mind later, you can enable or disable the log collecon in Sengs (page 105).
It is important that you look at the display only when it is safe to do so. If you are the driver of the
vehicle, we recommend that you operate Isuzu navigaon before you start your journey.
Plan the route before your departure and stop if you need to change the route. You must obey the
traffic signs and follow the road geometry.
If you deviate from the recommended route, Isuzu navigaon changes the instrucons accordingly.
For more informaon, consult the End User Licence Agreement (page 108).
2 Getting started
1. Turn the unit on then insert the card into the SD slot of the audio unit.
2. Press the on the Home menu screen to start the Navigaon feature.
3. The Navigaon splash screen will appear while the soware is starng up, with a progress bar
indicang loading status.
6
Isuzu navigation is optimised for in-car use. You can use it easily by tapping the screen
buttons and the map with your fingertips.
When using the navigation software for the first time, an initial setup process starts
automatically. Do as follows:
1. Read the End User Licence Agreement. Tap to continue.
2. You are now asked whether you allow the software to collect usage information and
GPS logs that may be used for improving the application and the quality and coverage
of maps. Tap
to allow the anonymous statistics or disable this function.
Later you can turn them on or off individually in Log collection settings (page 105).
3. The Configuration wizard starts. Tap to continue.
4. Select the language and speaker used for voice guidance messages.
Later you can change it in Sound and Warnings settings (page 104).
5. If needed, modify the time format and unit settings.
Later you can change them in Regional settings (page 104).
6. If needed, modify the default route planning options.
Later you can change them in Route settings (page 97).
7
7. The initial setup is now complete. The Configuration wizard can be restarted later
from the Settings menu (page 92). After the initial setup, the Navigation menu appears
and you can start using Isuzu navigation.
Note! In some sections of this manual it refers to dailing phone numbers via a point of
interest. For this feature to function, a compatible mobile phone must be connected
to the audio system via Bluetooth.
For your quick reference proceed to page 35 on how to enter an address!
2.1 Navigation menu
You can reach all parts of Isuzu navigation from the Navigation menu.
You have the following options:
●Tap to select your destination by entering an address or selecting
a place of interest, a location on the map or one of your Favourite destinations. You
can also look up your recent destinations from the Smart History or enter a coordinate.
●Tap to display the route parameters and the route in its full length
on the map. You can also perform route-related actions such as editing or cancelling
your route, setting a start point for the route, picking route alternatives, avoiding parts
of the route, simulating navigation or adding the destination to your Favourites.
●Tap to customise the way the navigation software works,
to simulate demo routes or to run some additional applications.
8
●Tap to customise the way the navigation software works.
●Tap to start navigating on the map. The button itself is a miniature
live map that shows your current position, the recommended route and the surrounding
map area. Tap the button to enlarge the map to the full screen.
●Tap to stop navigation and exit the software.
2.2 Hardware buttons
You can use Isuzu navigation mostly by tapping the touch screen.
You can turn DIR-6200 on or off at any time. When DIR-6200 is switched off, Isuzu
navigation does not calculate your GPS position and it does not update the route or the
driving instructions.
When you turn DIR-6200 on again, Isuzu navigation continues navigating as soon as
the GPS receiver has determined your position.
2.3 Buttons and other controls on the screen
When you are using Isuzu navigation, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs
to perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, Isuzu navigation saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type Example Description How to use it
Tap it to initiate a function,
Button
Button
with value
to open a new screen, or
to set a parameter.
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Tap it once.
Tap it once.
Icon Shows status information.
9
Some icons also function
as a button.
Tap them once.
List
When you need to select
from several options, they
appear in a list.
Grab the list anywhere
and slide your finger up
or down.
Depending on the speed
of the sliding, the list will
scroll fast or slow, only a
bit or till the end.
Alternatively, move between
pages with the and
buttons and tap the
value that you want.
Radio
button
Switch
Slider
Virtual
keyboard
When there are only a few
choices, radio buttons may
be used instead of lists.
Only one value can be
selected.
When there are only two
choices, a checkmark
shows whether the feature
is enabled.
When a feature can be set
to different values in a range,
Isuzu navigation shows an
indicator on a gauge that
displays and sets the value.
Alphabetic and alphanumeric
keyboards to enter text and
numbers.
Tap one of the buttons to
select a new value.
Tap it to turn the switch on
or off.
●Drag the handle to move
the slider to its new position.
●Tap the slider where you
want the handle to appear;
the thumb jumps there.
Each key is a touch screen
button.
10
2.3.1 Using keyboards
You only need to enter letters or numbers when you cannot avoid it. You can type with your
fingertips on the full-screen keyboards and you can switch between various keyboard
layouts, for example English, Greek or numerical.
Task Instruction
Switching to another keyboard
layout, for example from an
English keyboard to a Greek
keyboard
Correcting your entry on the
keyboard
Entering a space, for example
between a first name and a
family name or in multi-word
street names
Tap the button and select the
new keyboard layout from the list.
Tap to remove the unneeded character(s).
Tap and hold the button to delete several characters or
the entire input string.
Tap the button at the bottom centre of the screen.
Entering upper and lower case
letters
Entering numbers and symbols
Finalising the keyboard entry
(accepting the suggested
search result)
Finalising the keyboard entry
(opening the list of search
results)
Finalising the keyboard entry
(saving your input)
Cancelling the keyboard entry
(returning to the previous screen)
When entering a text, the first character appears in upper
case while
the rest of the text is in lower case. Tap to enter
an upper case letter or tap twice to turn on Caps Lock.
Tap again and lower case letters return.
Tap to switch to a keyboard offering numeric and
symbol characters.
Tap .
Tap .
Tap .
Tap .
11
2.3.2 Beyond single screen tap
You usually need to tap the screen only once. However, some useful features can be
accessed with combined touch screen tapping. Those are the following:
Action Details
Tapping and
holding the screen
Tap and keep pressing the following buttons to reach extra functions:
●Tap and hold on list and menu screens:
the Map screen appears.
●Tap and hold any of the , , , ,
, and buttons on the Map screen: you can rotate, tilt or
scale the map continuously.
●Tap and hold on keyboard screens: you can delete
several characters quickly.
●Tap and hold or in long lists: you can scroll
pages continuously.
Gestures (drag&drop)
You need to drag and drop the screen only in cases like:
●
Moving the handle on a slider.
●
Scrolling the list: grab the list anywhere and slide your finger
up or down. Depending on the speed of the sliding, the list
will scroll fast or slow, only a bit or till the end.
●
Moving the map in map browsing mode: grab the map, and
move it in the desired direction.
12
2.4 Map screen
2.4.1 Navigating on the map
The Map screen is the most frequently used screen of Isuzu navigation.
A small live map is displayed on the Navigation menu, as a part of the
button.
To enlarge this small map and open the Map screen, tap .
This map shows the current position (the Vehimarker, a blue arrow by default), the
recommended route (an orange line), and the surrounding map area.
When there is no GPS position, the Vehimarker is transparent. It shows your last known
position. You see coloured dots circling around a satellite symbol in the top left corner.
The more green dots you see, the closer you are to get the valid GPS position.
When GPS position is available, the Vehimarker is displayed in full colour, now showing
your current position.
There are screen buttons and data fields on the screen to help you navigate.
During navigation, the screen shows route information.
13
The button gives quick access to frequently used functions. You can change the
available functions in Settings.
By default, only one data field is displayed in the bottom right corner. Tap this field to
see all route data fields. Tap any of the data fields to suppress others and display only
the selected one.
The data fields are different when you are navigating an active route and when you have
no specified destination (the orange line is not displayed). Default data fields when cruising
without a destination (tap and hold any of the fields to change its value):
Field Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate
time comes from the GPS satellites, and the time zone information
comes from the map or it can be set manually in Regional settings.
(The current time is always displayed in the top left corner of menu screens.)
Default data fields when navigating a route (tap and hold any of the fields to change its value):
Field Description
Shows the distance you need to travel on the route before reaching
your final destination.
Shows the time needed to reach the final destination of the route
based on information available for the remaining segments of the
route.
The calculation cannot take into account traffic jams and other possible
delays.
Shows the estimated arrival time at the final destination of the route
based on information available for the remaining segments of the route.
The calculation cannot take into account traffic jams and other possible
delays.
14
2.4.2 Position markers
2.4.2.1 Vehimarker and Lock-on-Road
When your GPS position is available, Isuzu navigation marks your current position with
the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in
Settings. When on-road navigation is selected, the Vehimarker may not show your exact
GPS position and heading. If roads are near, it is aligned to the nearest road to suppress
GPS position errors, and the direction of the icon is aligned to the direction of the road.
If you select off-road navigation: The Vehimarker is at your exact GPS position.
The direction of the icon shows your current heading.
2.4.2.2 Selected map location (Cursor) and selected map object
You can mark a map location in the following ways:
●Tap the map when navigating,
●Tap the map when you are asked to confirm the destination at the end of a search, or
●Tap the map in Find on Map (page 59)
When a map location is selected, the Cursor appears at the selected point on the map.
The Cursor is displayed with a radiating red dot ( ) to make it visible at all
zoom levels. The location of the Cursor can be used as the destination of the route,
a new alert point, you can search for Places around it, or you can save this location
as one of your Favourite destinations.
You can also select some of the objects on the map. If you tap the map at the icon of a
Place of Interest or an alert point, the object will be selected (you see a red circling border
around the object), and you can get information about this object or use it as a route point.
2.4.3 Objects on the map
2.4.3.1 Streets and roads
Isuzu navigation shows the streets in a way that is similar to how the paper road maps
show them. Their width and colours correspond to their importance: you can easily tell a
motorway from a small street.
15
2.4.3.2 Turn preview and Next street
When navigating a route, the top section of the Map screen shows information about the
next route event (manoeuvre) and the next street or the next city/town.
There is a field in the top left corner that displays the next manoeuvre. Both the type of
the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position
are displayed.
A smaller icon shows the type of the second next manoeuvre if it is near the first one.
Otherwise, only the next manoeuvre is displayed.
Most of these icons are very intuitive. The following table lists some of the frequently shown
route events. The same symbols are used in both fields:
Icon Description
Turn left.
Turn right.
Turn back.
Bear right.
Turn sharp left.
Keep left.
Continue straight in the intersection.
Go left on the roundabout, 3rd exit (next manoeuvre).
16
Enter roundabout (second next manoeuvre).
Enter motorway.
Exit motorway.
Board ferry.
Leave ferry.
Approaching a waypoint.
Approaching the destination.
2.4.3.3 Lane information and Signposts
When navigating on multilane roads, it is important to take the appropriate lane in order to
follow the recommended route. If lane information is available in the map data, Isuzu navigation
displays the lanes and their directions using small arrows at the bottom of the map. Highlighted
arrows represent the lanes and direction you need to take.
Where additional information is available, signposts substitute arrows. Signposts are displayed
at the top of the map. The colour and style of the signposts are similar to the real ones you
can see above road or by the roadside. They show the available destinations and the number
of the road the lane leads to.
All signposts look similar when cruising (when there is no recommended route). When navigating
a route, only the signpost that points to the lane(s) to be taken is displayed in vivid colours;
all others are darker.
If you want to hide the currently displayed signposts, tap any of them and the normal Map
screen returns until new signpost information is received.
17
2.4.3.4 Junction view
If you are approaching a motorway exit or a complex intersection and the needed information
exists, the map is replaced with a 3D view of the junction. The lanes you need to take are
displayed with arrows. At the top of the screen road signs show you additional information.
If you want to hide the currently displayed junction, tap the picture and the Map screen returns.
2.4.3.5 Motorway exit services
You may need a petrol station or a restaurant during your journey. This feature displays a
new button on the map when you are driving on motorways.
Tap this button to open a panel with the details of the next few exits or service stations.
Tap any of them to display the exit area on the map. You can now easily add this exit as
a waypoint to your route if needed.
If you want to display other types of Places for the exits, you can change the icons in Visual
Guidance settings (page 102).
18
2.4.3.6 3D object types
Isuzu navigation supports the following 3D object types:
Type Description
3D terrain map data shows changes in terrain, elevations or depressions
in the land when you view the map in 2D, and use it to plot the route
3D terrain
map in 3D when you navigate. Hills and mountains are shown in the
background of the 3D map, and illustrated by colour and shading on
the 2D map.
Elevated roads
3D landmarks
3D buildings
Complex intersections and vertically isolated roads (such as
overpasses or bridges) are displayed in 3D.
Landmarks are 3D artistic or block representations of prominent or
well-known objects.
3D block representation of full city building data containing actual
building size and position on the map.
2.4.3.7 Elements of the active route
Isuzu navigation shows the route in the following way:
Symbol Name Description
Your current position displayed on the map. If roads are
Current GPS position
and Start point
Waypoint (intermediate
destination)
near, it is aligned to the nearest road. Normally if GPS
position is available, the route starts from the current
position. If there is no valid GPS position, Isuzu navigation
uses the last known position as the start point.
An intermediate destination of the route before reaching
the final destination.
Destination (end point)
Route colour
Streets and roads that
are excluded from the
navigation
19
The final destination of the route.
The route always stands out with its colour on the map,
both in daytime and in night colour mode.
You can choose whether you want to use or avoid certain
road types (page 97). However, when Isuzu navigation
cannot avoid such roads, the route will include them and
it will show them in a colour that is different from the route
colour.
2.4.4 Manipulating the map
Tap the map anywhere to browse it during navigation. The map stops following the current
position (the Vehimarker, a blue arrow by default, is not locked in a fix position on the screen
any more) and control buttons appear to help you modify the map view.
Action Button(s) Description
Moving the
map with
drag&drop
Zooming in
and out
Tilting up and
down
Rotating left
and right
No buttons
,
,
,
You can move the map in any direction: tap and hold
the map, and move your finger towards the direction
you want to move the map.
Changes how much of the map is displayed on the screen.
Isuzu navigation uses high-quality vector maps that let
you examine the map at various zoom levels, always with
optimised content. It always displays street names and
other text with the same font size, never upside-down,
and you only see the streets and objects that you need.
Map scaling has a limit in 3D map view mode. If you zoom
out further, the map switches to 2D view mode.
Tap the button once to modify the view in large steps,
or tap and hold the button to modify it continuously and
smoothly.
Changes the vertical view angle of the map in 3D mode.
Tap the button once to modify the view in large steps, or
tap and hold the button to modify it continuously and smoothly.
Changes the horizontal view angle of the map.
Tap the button once to modify the view in large steps, or tap
and hold the button to modify it continuously and smoothly.
2D or 3D view
,
Compass in
2D map view
mode
Compass in
3D map view
mode
,
,
Tap this button to switch between the 3D perspective
and 2D top-down map view modes.
The direction of the compass shows North. Tap the
button to switch to North-up view, and then tap again to
rotate the map in the previous direction.
The direction of the compass shows North. Tap the
button to switch to North-up view, and then tap again to
rotate the map in the previous direction.
20
Location
information
Tap this button to open a new screen with information
about the selected map point, the Cursor.
Return to
normal
navigation
Additional
options
Select
destination
Tap this button to move the map back to follow the
current GPS position. Automatic map rotation is also
re-enabled. The map manipulation buttons disappear
and navigation continues.
Tap this button to open a list of additional features like
saving the Cursor as a Favourite destination, or
searching for Places around the Cursor.
Tap this button to select the Cursor as a new
destination. The route is automatically calculated.
2.4.5 Quick menu
The Quick menu is a selection of controls and functions that are frequently needed during
navigation. It
can be opened directly from the Map screen by tapping .
The menu will close after a few seconds of inactivity or if you tap .
Most of these functions are shortcuts. They are accessible from the menu system.
There are more functions available than the number of buttons in the menu. In Settings,
you can choose the function of each button (page 96). The following options are available:
Button Description Shortcut for
This button opens the Combined Search function that
allows you to search addresses, Places, Favourite and
recent destinations by name in one unified environment.
This function lets you search for a Place by its name.
The search is carried out either along your route or
around your current location if there is no route calculated.
21
Destination
(page 26)
Destination /
Find Places /
Quick Search
(page 48)
This button opens the list of your Favourite destinations.
Find / Favourite
(page 60)
This button opens the History list. You can select one of
your previous destinations.
This button opens the route editing function.
This button opens the route related settings.
This button opens the map related settings.
This button opens a special screen with information
about the current position and a button to search for
nearby emergency or roadside assistance. For details,
see the next chapter.
This button cancels the route and stops navigation.
The button is replaced with the next one if waypoints
are given.
Find / History
(page 62)
My Route /
Edit Route
More / Settings /
Route Settings
(page 97)
More / Settings /
Map Settings
(page 101)
Tap the Current
Street field on the
Map screen
My Route /
Cancel Route
(page 70)
This button skips the next waypoint from the route.
This button opens a 2D map scaled and positioned to
show the entire route.
This button opens the Visual Guidance settings screen.
This button lets you bypass parts of the recommended
route.
This button opens the Trip Monitor screen where you
can manage your previously saved trip logs and track
logs.
n/a
My Route /
Overview
(page 65)
More / Settings /
Visual Guidance
(page 102)
My Route /
Avoidances
More / Trip Monitor
(page 91)
22
This button opens the list of manoeuvres (the itinerary).
Tap the top of the
Map screen during
navigation.
With this function you can save the active route for later
use.
With this function you can replace the active route with a
previously saved route.
With this function you can search for Places of Interest in
various different ways.
This button opens the Map screen and starts simulating
the active route.
This button opens the GPS Information screen with satellite
position and signal strength information.
This button opens the parameters of the selected Vehicle
profile.
My Route / More /
Save Route
My Route / More /
Load Route
Find / Find Places
(page 47)
My Route / More /
Simulate Navigation
(page 78)
Tap the top of the
Map screen when
there is no GPS
reception
More / Settings /
Route (page 97)
More / Settings /
This button opens the Driving timer configuration screen.
Truck / Configure
Driving Timers
(page 85)
2.4.6 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about the last known
position if GPS reception is not available) and a button to search for useful Places nearby.
You can access this screen from the map in one of the following ways:
23
●If the current street is displayed below the Vehimarker (the current position on the
map), tap it to open the Where Am I? screen.
●Open the Quick menu and tap the button.
Information on this screen:
● : Latitude and Longitude (coordinate of the current position in WGS84 format).
,
● : Altitude (elevation information coming from the GPS receiver - often inaccurate).
● : House number on the left.
● : House number on the right.
●In the middle of the screen you can see whether the position is current, or the time left
since it was last updated.
●Address details (when available) of the current position are displayed at the bottom.
You can also perform some actions on this screen:
Tap to save the current position as a Favourite destination.
You can also search for assistance near your current position. Tap
to open a new screen for the Quick search:
The following services can be searched around the current position or the last known position:
● : Car repair and roadside assistance services
● : Police stations
● : Medical and emergency services
24
● : Petrol stations
Tap any of the buttons, select a Place from the list, and navigate to it.
25
3 On-road navigation
When first started, Isuzu navigation calculates routes using the road network of the high
quality vector maps provided with the product.
You can set up your route in different ways:
● If you need a route for immediate navigation, you can select the destination and
start navigating to it right away (normal navigation).
● You can also plan a route independently of your current GPS position or even
without GPS reception. To achieve this you need to set a new starting point in
My Route / Edit Route by tapping the flag icon at the current position. This will
also turn off the GPS receiver so that the route is not recalculated when a new
position is received.
You can plan routes with multiple destinations. Select the first destination. Then select a
second destination and add it to your route to create a multi-point route. You can add as
many destinations to your route as you like.
You can also use Isuzu navigation for off-road navigation. For details, see page 80.
3.1 Selecting the destination of a route
Isuzu navigation offers you several ways of choosing your destination:
a house number or the names of two intersecting streets (page 35).
the name of the city/town and the search for street names might be faster as well.
● Enter a full address or a part of an address, for example a street name without
● Enter an address with postal code (page 45). This way you do not need to select
● Use a built-in Place of Interest as your destination (page 47).
● Select a location on the map with the Find on Map feature (page 59).
● Use a previously saved Favourite destination (page 60).
● Select a location from the History of previously used destinations (page 62).
● Enter the coordinate of the destination (page 63).
3.1.1 Combined Search
There are several ways to select the destination of the route. You can find buttons in the
Destination menu that initiate a separate search for addresses, Places, Favourite or recent
destinations. The fastest way to search for any of these is to use the Combined Search.
In this section you can find the full description of how this feature works.
The below process shows how to carry out the search and the following subsections will
help you find specific kinds of results.
1. In the Navigation menu, tap then tap Search in all... at the top of
the screen.
26
2. First you see hints on the screen showing how you can use the function. These hints
are only displayed the first time you use this screen.
3. Tap anywhere and the hints disappear. Once you get through this screen to the search
results, the hint will not appear again when you open this window later but you can see
them again if you tap the information button on the right side of the input field.
4. You can see the input field at the top of the screen. Right below that you see the search
area, the city/town around which the search is carried out. The default search area is the
area where you are located. For a local search, skip the next step.
5. (optional) To search in a different area, do as follows:
1. Tap . A new screen opens with a new input field. A hint bubble
explains how you can specify the new search centre.
2. Tap anywhere and the hint disappears. If you successfully select a new search area,
the hint will not appear again when you open this window later but you can see it again
if you tap the information button on the right side of the input field.
3. Start entering the centre of the new search area using the screen keyboard. You only
need to enter a few letters to get a result. If the new search area is in a different country
or state, you can narrow the search results if you enter one space and then a few letters
of the country or state of the search area.
4. The most likely result appears below the input field as you enter new letters. Tap to
select this as your new search area. If you cannot see your preferred area after a few
letters, tap and select one from the list.
27
6. With the proper search area displayed, you can start entering the name, address or
category of the destination you are looking for. The number shown in the
button shows how many results match the entered text. The background search is carried
out while you enter letters so this number may keep on increasing if you wait a few seconds.
Keep on entering new letters while this number is high.
7. Once the number of results is acceptable after a few seconds of searching, you can tap
to switch to the result screen.
8. The result screen also opens with hints. Tap anywhere to suppress them. Once you
select a destination, they will not appear again.
9. You see all results in the list, regardless of their type. Addresses, Places, Place categories,
Favourite and recent destinations are mixed within one list.
10. You have the following options:
● Tap the result you want to use as your destination. Scroll the list if necessary.
● To narrow the search for only one type of result (for example for Places only) you can
tap the related button at the top of the screen. See the next sections for details.
11. Once the destination is selected, a full screen map appears with the selected point in the
middle. If necessary, tap the map somewhere else to modify the destination.
The Cursor ( ) appears at the new location. Tap to
confirm the destination, or tap to select a different destination.
28
12. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap to modify route parameters,
or tap and start your journey.
If you know that you will use this destination frequently, before tapping
to confirm the destination, put it on the list of your Favourites first: tap
Tip!
then , give a name for the new Favourite, and tap
to save the location. The map with the destination returns automatically.
Now you can start your journey.
3.1.1.1 Combined Search - Navigating to a recent destination (History)
To find one of your recent destinations in Combined Search, carry out the search as described
earlier. For the input text you can use either a part of the name or a part of the address of
the recent destination. When you get to the result screen, do as follows:
1. Tap at the top of the screen.
2. The list is now filtered. What you see is the list of recent destinations with a matching
name or address.
3. Scroll down the list if necessary and then select one of the destinations from the list.
4. Once the destination is selected, a full screen map appears with the selected point in
the middle. If necessary, tap the map somewhere else to modify the destination.
The Cursor ( ) appears at the new location. Tap to
confirm the destination, or tap to select a different destination.
5. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap to modify route
29
parameters, or tap and start your journey.
Note!
The alternative way to search for a recent destination is to tap the button
in the Quick menu or in the Destination menu. The rest of the procedure is similar
to the above.
3.1.1.2 Combined Search - Navigating to a Favourite destination
To find one of your Favourite destinations in Combined Search, carry out the search as
described earlier. When you get to the result screen, do as follows:
1. Tap at the top of the screen.
2. The list is now filtered. What you see is the list of your Favourite destinations with a
matching name.
3. Scroll down the list if necessary and then select one of the destinations from the list.
4. Once the destination is selected, a full screen map appears with the selected point
in the middle.
If necessary, tap the map somewhere else to modify the destination. The Cursor ( )
appears at the new location. Tap to confirm the destination,
or tap to select a different destination.
5. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap to modify route
parameters, or tap and start your journey.
Note!
The alternative way to search for a Favourite destination is to tap the
button in the Quick menu or in the Destination menu.
The rest of the procedure is similar to the above.
30
Loading...