Istorage IS-DT2-256-3000-C-G Product Data Sheet

The world’s first and only NCSC CPA, FIPS 140-2 Level 3,
NLNCSA BSPA & NATO certified encrypted desktop HDD

The diskAshur DT2 USB 3.1 HDD is an ultra-secure, PIN authenticated,
hardware encrypted portable hard drive. Using the device couldn’t be
easier, simply connect to any computer and enter a 7-15-digit PIN. If the
correct PIN is entered, all data stored on the drive will be decrypted
and accessible. To lock the drive, simply eject it from the host computer
and all data stored on the device will be encrypted (full disk encryption)
using military grade AES-XTS 256-bit hardware encryption.

One of the unique security features of the diskAshur DT2 is the dedicated
on-board secure microprocessor (Common Criteria EAL4+ ready), which
employs built-in physical protection mechanisms designed to defend
against external tamper, bypass attacks and more. The device reacts to
an automated attack by entering the deadlock frozen state.

In plain and simple terms, without the PIN there’s no way in!

MAIN FEATURES

General Intelligence and
Security Service

Ministry of the Interior and
Kingdom Relations

OS & platform independent

100% hardware encryption, platform/device independent - works with all operating systems.

Compatible with:
MS Windows, macOS, Linux, Android, Chrome, Thin Clients, Zero Clients, Embedded Systems, Citrix and VMware

Government accreditations

The diskAshur DT2 has been accredited to NCSC CPA, FIPS

140-2 Level 3, NLNCSA BSPA & NATO Restricted Level

certifications.

Self-destruct feature

You can pre-program the drive with your own unique self-destruct

PIN which, once implemented, instantly deletes the encryption key,

all PINs, data and then creates a new encryption key.

No speed degradation

As fast as any non-encrypted drive.

Auto lock

The diskAshur DT2 automatically locks when unplugged from

the host computer or power to the USB port is turned off and

can also be set to automatically lock after a predetermined

amount of time.

Tamper proof design

Wear resistant epoxy coated keypad

Designed with protection in mind, the wear resistant epoxy

coated keypad hides key usage to avoid tipping off a potential

hacker to commonly used keys.

All of the components of the drive are completely covered by a

layer of super tough epoxy resin, which is virtually impossible to

remove without causing permanent damage to the components.

This barrier prevents a potential hacker from accessing the critical

components and launching a variety of futile attacks.

Brute force hack defence mechanism

After 15 consecutive incorrect PIN entries, the drive assumes it is being attacked and will delete the encryption key and lock itself,

rendering all data previously stored on the drive as lost forever. At this point the drive can be reset to factory default settings and

redeployed.

Designed, developed and assembled in the UK.

Features

RoHS

30 day

free evaluation

www.istorage-uk.com

• Real-time military grade AES-XTS 256-bit full disk
hardware encryption

• Common Criteria EAL4+ ready on-board secure
microprocessor

• FIPS PUB 197 validated encryption algorithm

• NCSC CPA certified

• FIPS 140-2 Level 3 certified

• NLNCSA BSPA certified

• NATO Restricted Level certified

• PIN authenticated - supports independent user
and admin PINs (7-15 digits in length)

• No software required - 100% hardware encryption

• OS & platform independent

• Works on any device with a USB port

• Read-only (write protect) & read/write

• Brute force hack defence mechanism

• Super speed USB 3.1

• Epoxy coated wear resistant keypad

• Self-destruct feature

• Unattended auto lock

• Drive reset feature

• Tamper proof

1. LED lights

standby state / locked

user mode / unlocked

admin mode

2. Alphanumeric kepad

3. Lock

4. Unlock

USB 3.1

5. SHIFT key

6. Desk lock slot

7. USB 3.1 port

8. Mains power

9. On/Off switch

CAPACITIES

UP TO

12TB

6

GDPR

COMPLIANT

1

2

3

5

8

7

4

9

Technical specifications

Hardware

Capacities

Speed

Dimensions (H,W,D)

Weight

Software free
Compatible with:

Hardware data
encryption

Certifications

Power supply

USB 3.1 super speed - backward compatible with USB 1/2/3

1TB / 2TB / 3TB / 4TB / 6TB / 8TB / 10TB / 12TB

225MB/s (read) | 223MB/s (write)

185.5mm / 112mm / 43.5mm

approx. 1238 grams

based on a 8TB drive, other capacities may vary

MS Windows, macOS, Linux, Chrome, Android, Thin Clients, Zero Clients, Embedded Systems,
Citrix and VMware

AES-XTS 256-bit full disk hardware encryption

NCSC CPA, FIPS 140-2 Level 3, NLNCSA BSPA & NATO Restricted Level certified

12V AC adapter

Ordering
information

BOX CONTENT

Desktop drive
Universal mains adapter
USB cable
Quick start guide

IS-DT2-256-XXXX-C-G

tel: [phone]
e-mail: [e-mail]
web: istorage-uk.com

XXXX = capacity

All listed capacities, within the diskAshur range is used for formatting and other functions and thus is not available for data storage.

As such, the actual available capacity for data storage is less than what is listed on the products.