IRiver N10 512MB, N10 User Manual

Download

http://www.iriver.com

User’s Manual

N10

Thank you for purchasing the product. Please read the manual carefully before use.

I Quick Start I

Turning on/off the Player 2 Listening to music 2

Recording 3 Charging the Player 4

Chapter

Quick Start

Turning on/off the Player

Quick Start

Playing Music

Turning on the player

Press the PLAY/STOP button to turn the player on.

Press and hold

The player will power off after a period of time with no-activity (not playing music, etc.). Please see Page 46 to adjust this setting.

Selecting track

: Selects the previous track.

: Selects the next track.

Controlling volume

+ : Increases volume

- : Decreases volume

Playing music

Press the PLAY/STOP button to play music.

Connecting earphones

Connect the earphones as shown above.

Type A Type B

Turning off the player

Press and hold the PLAY/STOP button to turn the player off.

Press the PLAY/STOP button again to play music.

I 1 Quick Start I

Quick Start

Recording Voice

Starting recording

Press the MENU button.

- Recording will be started.

Finishing recording

Press the MENU button again.

- Recording will be finished.

Listening to recording file

Press the PLAY/STOP button after stopping recording to play the recorded file.

Quick Start

Recording Voice

Navigating menu

Press and hold the MENU button.

Press and hold

Recording Stand By

Press the PLAY/STOP button.

- The player will be in standby mode with displaying RECORD READY on LCD.

Selecting Voice Recording

Press the / button to select [Voice].

Quick Start Guide

Charging the Player

Charging with USB cable.

Push the "PUSH OPEN" on the back of your player to disconnect its cap as shown below. Connect the USB port and PC with USB cable to charge battery.

The player will charge automatically when the player is connected to the PC.

Player will charge even when powered off.

Charging time: Approx. 1.5 hours (At full discharge, Stop mode)

Note ...

I Getting started I

Greetings 6 Copyright and Certifications 6 Trademarks and Disclaims

Features 9

Accessories

9 Locating the Controls 10 LCD Display

Chapter

Getting started

Greetings

Getting started

Thank your for your iriver purchase.

Also, welcome to the world of N10, the market-leading MP3 player. We are sure that the iriver's N10 player may sufficiently satisfy you and make your life more enjoyable. This user's manual is provided to help you safely use the product. Please read this manual carefully before using it. Thank you.

http://www.iriver.co.kr

The iriver's home page provides the overview of company and products, other related information, and answers to common questions. Firmware and software updates are also available as well as the most recent information about your iriver product.

You may get useful information from "User's Forum" and FAQ. Register your ID and get any appropriate online customer support. Also, you can get newsletter such as newly announced product, firmware upgrade, various promotion events via email.

iriver Limited has all the rights of the patent, trademark, literary property and intellectual property related to this manual. You may not copy or reproduce any part of this manual unless authorized by iriver Limited. You can be punished by using any part of this manual illegally.

The software, audio and video which have an intellectual property are protected by copyright and international laws. It is user s responsibilities when he/she reproduce or distribute the contents created by this product.

The companies, institutions, products, people and events used in examples are not real data. We don't have any intension to be related with any companies, institutions, products, people and events through this manual and should not draw inferences. Users are responsible for observing the copyrights and intellectual properties.

Certifications

CE, FCC, MIC

I 2 Getting started I

Getting started

Trademarks and Limited Liability

Trademarks

Windows, Windows 98 SE, Windows ME, Windows 2000, Windows XP and Windows Media Player are registered trademarks of Microsoft Corp.

Limited Liability

Neither the Manufacturer, importers nor dealers is responsible for any accidental damage including bodily injury or any damage resulting from misuse or unsuitable operation by you.

The information on this manual is prepared with the current product specifications. The manufacturer, iriver Limited, is adding new features to the product and may persistently apply new technologies hereafter.

All standards may be changed at any time without notice.

Note ...

Getting started

Features

16 Gray Organic EL Display Supporting Multiple Languages

N10 series comes with 16 gray OELD which can support multiple languages (40 languages).

Necklace with Integrated Earphones

Direct Charging via USB

6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal

Xtreme EQ and Xtreme 3D

Customize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D.

Voice Recording

Voice record level is automatically controlled by AGC function.

Firmware Upgrade

Provides the latest updated features via firmware upgrade.

Supports 100 folders total and up to 260 files at one time

Simple navigation makes it easy to find any song

I 2 Getting started I

Main unit

Getting started

Accessories Accessories subject to change without notice and may vary from image shown.

Earphone Covers

Mini USB Adapter / USB Cable

Installation CD

User Manual/Warranty Card/ Quick Start Guide

Type B Necklace, cap

Type A Necklace style earphone

Hold connection part of necklace and push it into the direction of arrow.

Hold the end of strap and pull it out to the direction of arrow to separate the connection part.

Put the separated end into the neck strap hole on the player. The connected part will be released.

Assemble the earphone in the opposite order after putting the strap in the connection hole of the player.

Getting started

Locating the Controls Actual player may differ slightly from images below.

Front View

Type A Type B

Rear View

OEL Screen

USB Connection

Port

OEL Screen

USB Connection

Port

Eject button

Cap

Getting started

Locating the Controls Actual player may differ slightly from images below.

Front View

Rear View

Earphone jack

Neck strap

Eject button

Cap

I 2 Getting started I

Getting started

Locating the Controls The images below can be different from the product.

Left side

Right side

PLAY / STOP / TURN ON / TURN OFF button

Long : MENU button Short : A-B Repeat

Volume – / Move to the Down button

Volume + / Move to the Up button

Next Track/ Move to the Left button

Previous Track/ Move to the Right button

Getting started

LCD Display

1 6

MUSIC mode

1 Clock 2 Progress Bar 3 Playback Mode / Status 4 Folder Name 5 Music Title 6 Battery Indicatorr 7 Play Time 8 Volume Level 9 EQ / File Format / Bit Rate /

Sample Rate

Getting started

LCD Display

IRM (iriver Rights Management) iriver Rights Management is a digital music format. Please visit our web site for details about this music format.

File format

ASF WMA MP3 IRM

Getting started

LCD Display

RECORD mode

[Before Recording]

[After Recording]

1 Recording Status 2 Recording Icon 3 Status Bar 4 Number of Files 5 Recording Time 6 Remaining Time

7 Recording Status Bar 8 Recording Folder Name 9 Recording File Name

I Basic Operation I

PC Software Installation 14 Connecting to the PC 17 Installation of "New Hardware" 18 Safely Removing the Player from the PC 19 Operate the Software 20 Learning the Basic Function 22 Toolbar Menu 22 File Managing Tools 23 File Menu 23 View Menu 24 Tools 24

Windows 25 Help 25 Downloading from the PC 26 Basic Operation 27 Navigation 27 MP3 28 Voice Recording 29 Menu Setting 31 Deleting File or Folder 32

Chapter

Basic Functions

PC Software Installation Install the software before connecting the player to PC.

On inserting software installation CD into CD-ROM drive located in PC, the following screen will appear.

- IIf the installation program does not automatically run in a few seconds, click My Computer icon to browse the CD-ROM drive and run SETUP.EXE manually.

- The software installation CD contains :

Device Driver Manager Program for PC Manager Program for Mac

System Requirements (Windows)

Pentium 133Mhz or higher CD-ROM drive USB port 10MB of free hard disk space or higher Windows 98 SE/ME/2000/XP

Basic Operation

PC Software Installation

Install the software before connecting the player to PC.

- The software enables you to save MP3 and other format files into your player.

- For Microsoft Windows 2000, login as Administrator to install the software.

- For Microsoft Windows 2000 user, login as Administrator to install the software.

I 3 Basic Operation I

Basic Operation

PC Software Installation Install software before connecting the player to PC.

Insert the installation CD into the CD-ROM drive. Installation starts automatically.

Select a language for iriver Music Manager and Click "Next" after selecting the language to install.

Basic Operation

PC Software Installation

Click "Next" to install iriver Music Manager.3Select a folder to install iriver Music Manager

and click [OK]. Select the folder to install. Click "Next"

Basic Operation

PC Software Installation

Basic Operation

PC Software Installation

Click “Next” to continue the installation.

Click “Install” to proceed.

Click “Finish” when installation is complete.

I 3 Basic Operation I

Basic Operation

Connecting to the PC

Push the "PUSH OPEN" on the back of your player to disconnect its cap as shown below. Connect the USB port and PC with USB cable.

Basic Operation

Connecting to the PC

"USB CONNECTED" will appear on the LCD screen of the player.

Connect the USB cable to the PC after playback stops to avoid errors.

Basic Operation

Installation of "New Hardware"

After connecting the player to your PC, "Found New Hardware" screen is displayed.

Information screen is displayed on the PC. New hardware is installed successfully and ready to use.

New hardware installation process starts after installing iriver Music Manager program.

Basic Operation

Installation of "New Hardware"

I 3 Basic Operation I

Right-click the "Safely Remove Hardware" icon in the taskbar.

Basic Operation

Safely Removing the Player from the PC

Basic Operation

Safely Removing the Player from the PC

If abnormally removed from PC, the player may be damaged or cause serious malfunction.

Select the device to remove and click “Stop”.

Click the"OK" after confirming the hardware to remove.

Click the "Close" after confirming the Safely Remove Hardware message. (Windows XP)

Basic Operation

Safely Removing the Player from the PC

Basic Operation

Operate the Software

Double click the iriver Music Manager icon. iriver Music Manager version installed is

displayed.

I 3 Basic Operation I

Basic Operation

Operate the Software

Initial iriver Music Manager window.

The right side of iriver Music Manager will display the contents of the your player. If nothing is displayed in the right screen, please be sure that the player is properly connected to the USB cable and to the PC.

It may be necessary to disconnect the player from the cable and reconnect it to activate the right side of iriver Music Manager.

Note ...

Basic Operation - Screen Details

Learning the Basic Function

Basic Operation - Screen Details

Toolbar Menu

1 Wizard 2 Image Viewer 3 Firmware Upgrade 4 File Managing Tools 5 Detail information on

selected music

6 Play the selected music with

Windows OS preferred player

7 Play selected music file.

(Uses system default player). 8 Remaining capacity of the player 9 Turner Setting

10 Format Player 11 iriver Home Page Link

File Transfer Wizard

To transfer files from PC to the player.

File Conversion Wizard

To convert recorded REC files to a format your PC can use.

Audio CD Extracting Wizard

To extract the file with OGG format from Audio CD.

Firmware Upgrade

To upgrade Firmware.

N10 does not support Audio CD Extracting Wizard, Image Viewer, and Tuner Setting functions.

N10 does not support Audio CD Extracting Wizard,

Image Viewer, and Tuner Setting functions.

I 3 Basic Operation I

Basic Operation - Screen Details

File Managing Tools

Searches for file(s) or folder(s) within current window.

Move to Parent Folder

Moves currently selected folder to parent folder.

Refresh

Refreshes information on file(s) or folder(s) within current window.

View

To change how to display the selected folder.

New Folder

Makes a new folder.

Properties

Displays detail information on currently selected file or folder.

Basic Operation - Screen Details

File Menu

New Folder

To make a new folder on the PC or the player.

Delete

To delete the selected folder or files on the PC or the player.

Rename

To rename the selected file or folder on the PC.

Properties

To display detailed information about the folder or file selected.

Exit

To exit the iriver Music Manager.

Basic Operation - Screen Details

View Menu

Basic Operation - Screen Details

Tools

File Transfer Wizard

To transfer files from PC to the player.

File Conversion Wizard

To convert recorded REC files to a format your PC can use.

Upgrade Firmware

To upgrade firmware.

N10 does not support CD Extraction Wizard, Image Viewer, and Turner Setting functions.

I 3 Basic Operation I

Basic Operation - Screen Details

Windows

Align Horizontally

To display the PC and player's windows horizontally.

Align Vertically

To display the PC and player's windows vertically.

Basic Operation - Screen Details

Help

About iriver Music Manager

To confirm the version of Manager.

iriver Music Manager Help

Opens iriver Manager Help.

Firmware Information

To see the information about your player.

iriver Homepage

To connect the iriver homepage.

Basic Operation

Downloading from the PC

Select the folders or files on the PC to transfer to the player. Drag and drop to move folders or files to the desired location on the player.

Basic Operation

Downloading from the PC

Once the music files appear on the right side of iriver Music Manager, they are on your MP3 player.

Files with over 127 characters in the file name will not be transferred.

Files with total path and filename over 512 characters will not be transferred.

The ROOT folder is limited to 1024 files and folders total. Subfolders do not have a limit to the number of files.

Press the / switch to select a mode.

- Navi - MP3 - Voice - Setup

I 3 Basic Operation I

Basic Operation

Press and hold the MENU button.

Press and hold

Press the MENU button to confirm.

- MP3 function is selected.

Basic Operation

Navigation Navigation function allows you to search music.

Navigation

Press and hold the MENU button.

Press and hold

Push the / switc h to select [Navi] and press the MENU button.

Select folder and file.

Press the <+ / - , / > button to move to the folder and file.

+ : To move up. - : To move down.

: To move to the upper folder. : To move to the lower folder.

Basic Operation

Navigation

Playing selected file(s)

To select the track, press the PLAY/STOP or button.

Basic Operation

MP3

Press and hold the MENU button.

Press and hold

Push the / switch to select [MP3].

Press the MENU or PLAY/STOP button to play music.

I 3 Basic Operation I

Press and hold

Basic Operation

MP3

Selecting previous/next song

Press the / button while playing song.

: To select the previous song.

: To select the next song.

Rewind/Fast-Forward

Press and hold the / button while playing song.

: Rewinds the playing song.

: Fast-forwards the playing song.

Adjusting the volume.

Press the + / - button to control volume.

+ : Increases volume

- : Decreases volume

Basic Operation

Voice Recording

Press and hold the MENU button.

Press and hold

Push the / switch to select [Voice].

Pres the MENU or PLAY/STOP button to enter the RECORD mode. (The recorder will be in standby mode.)

Basic Operation

Voice Recording

To stop recording

Press the MENU button.

- After stopping a recording, starting again will create a new voice file.

Listening to recorded file

Press the <PLAY/STOP> button after stopping recording to play the recorded file.

Basic Operation

Voice Recording

Recording voice

Press the MENU button again to begin recording.

To pause voice recording

Press the PLAY/STOP button to pause recording.

- Time indicator will blink to show that recording is paused.

Press the PLAY/STOP button again to resume recording.

- Pausing the recording will not create a new file, recording will be added to the current recording.

I 3 Basic Operation I

The recorded file is saved as VOICE000.REC in the VOICE folder.

If "00:00:00" is displayed, the player's memory is full. To record, delete files and/or folders on the player to make some space available. (To delete: Refer to page 32, Deleting File or Folder)

The player cannot record when the memory is full or the battery is low.

Keep the player far away enough from the source to avoid distortion in the recording.

Recorded REC files can be converted to MP3 files using iriver Music Manager. (Refer to page 70)

For more information on Menu Setting, refer to page 40 ~ 42.

Basic Operation

Menu Setting

Press and hold the MENU button.

Press and hold

Push the / switch to select [Setup].

Pres the MENU or PLAY/STOP button to enter the SETUP.

Basic Operation

Deleting File or Folder

Select the folder and file to delete using the + / - or / button.

Select [YES] using the / button and press the PLAY/STOP button to finish Delete process.

Press the MENU button.

- "FILE DELETE ARE YOU SURE ?" or "FOLDER DELETE ARE YOU SURE ?" is displayed.

You cannot delete a file which is currently playing.

Only empty folders can be deleted, delete all files in a folder before deleting that folder.

Press and hold

Basic Operation

Deleting File or Folder

Press the PLAY/STOP button to stop music playback.

- You cannot delete the file or folder which is currently playing.

Press and hold the MENU button to display function control. Then, highlight [Navi] and press the MENU button again to display the NAVIGATION SCREEN.

I Convenient Function I

Play Mode 34 A-B Repeat 36 EQ

Chapter

Changing Play mode

Press and hold the MENU button to display function control.

Press / to select [Setup] then press the MENU button.

Convenient Function

Play Mode

Convenient Function

Play Mode

Play Mode is set under [Setup] - [Mode].

Press the / button to select [Mode] and press the MENU button.

Press the + / - button to select the desired play mode.

Once the play mode has been highlighted press the MENU button to finish setting this mode.

Press and hold

I 4 Convenient Function I

Convenient Function

Play Mode

REPEAT

: Plays the tracks saved in memory in order and stop after playing the last track.

: Play a single track repeatedly.

: Play all tracks in the folder and stop.

: Play all tracks in the folder repeatedly.

: Play all tracks in the player repeatedly.

OFF

Convenient Function

Play Mode

SHUFFLE

: Randomly play all tracks in the folder.

: Randomly play all tracks in the folder and stop.

: Randomly play all tracks in the player and stop.

: Randomly play all tracks in the player repeatedly.

Convenient Function

A-B Repeat Repeat a selected interval.

Selecting point A

Press the MENU button once to select the beginning <A> point.

Selecting point B

Press the MENU button again to select the ending <B> point.

Setting EQ function

Press and hold the MENU button to display function control.

Press / to select [Setup] then press the MENU button.

Convenient Function

The EQ is set in the [Setup] - [Sound] menu.

Press and hold

I 4 Convenient Function I

Convenient Function

Press the / button to select [Sound] and press the MENU button to enter the Sound menu.

Press / to select [EQ Select] and press the Menu button.

You can select among ROCK, JAZZ, CLASSIC, U BASS, METAL, XTRMEQ, XTRM3D, NORMAL.

Convenient Function

Select

Once the EQ mode has been highlighted press the MENU button to finish setting this mode.

You can select among ROCK, JAZZ, CLASSIC, U BASS, METAL, XTRMEQ, XTRM3D, NORMAL. (see page 52 ~ 53).

Press the + / - button to select the desired EQ mode.

I Menu Setting I

Configuration 40 Selecting Setup Menu 41 Entering Submenu

41 Function Details 42 Exiting Menu 42

Menu-General

43 Menu-Display 44 Menu-Timer

46 Menu-Function 47 Menu-Mode 50 Menu-Sound

Chapter

Configuration

GENERAL

RESUME LANGUAGE LOAD DEFAULT

DISPLAY

BACKLIGHT LCD CONTRAST SCREEN SAVER SCROLL SPEED TAG INFORMATION PLAY TIME INFO

TIMER

SLEEP POWER OFF STOP POWER OFF SET TIME SET ALARM

CONTROL

FAST SKIP FF/RW SCAN SPEED VOICE RECORDING MODE VOICE AUTO DETECT PLAYBACK SPEED

MODE

PLAY MODE INTRO STUDY NAME

SOUND

EQ SELECT Xtreme EQ Xtreme 3D DBE SETTING 3D EQ SETTING SOUND BALANCE EQ LIMIT BEEP VOLUME SOUND FADE IN

Switching Menu

Press / to cycle through the six main menus. Press MENU or PLAY/STOP to enter any of them main menus.

I 5 Menu I

Entering Submenu

Selecting Setup Menu

Displaying MENU SETTING screen

Press and hold the MENU button, and Press / to select [Setup] and press the MENU button.

Press or to select [Setup] and press the MENU button.

Press and hold

Displaying submenu

Select the desired menu and press the MENU button to view its sub-menu.

Switching submenu

Press + / - to move up and down the sub-menu.

+ : Moves to previous submenu

- : Moves to next submenu

Exiting Menu

Exiting submenu

Once the desired setting is chosen, press the PLAY/STOP button to exit back to the previous menu and save the current setting.

Exiting main menu

Press the PLAY/STOP button again to exit the current sub-menu.

Function Details

Display function details

Select the desired function from the sub-menu and press MENU button to display that functions details.

Changing setting

Press the + / - button to cycle through all the setting options.

I 5 Menu I

Menu-General

RESUME

ON : Playback resumes from the previous location in a song

when the player is stopped or powered off.

OFF : Playback begins from the first track after the player is

stopped or powered off.

Menu-General

LANGUAGE

Supports 40 languages. Song title and ID3 tag information is dependent on the version sof the PC operating system that was used to create it.

- For example, if an MP3 file is created in a English version of Windows, the language setting should be English for the proper title display.)

LOAD DEFAULT

Initialize menus to the original factory settings. Press the <MENU> button and select [Load Default] menu.

Press the < > button and select [YES]. Press the <PLAY/STOP> button and select [YES] to initialize all settings.

MENU-Display

Back-Light

You can adjust the time that the Backlight stays on. Sec : The backlight stays on from 3 to 30 seconds.

Min : The backlight stays on from 1 to 30 minutes. Always : The backlight will remain on while player is powered on. Press the <MENU> button to set Sec/Min/Always.

MENU-Display

LCD CONTRAST

Adjust LCD contrast by setting 0 ~ 40.

SCREEN SAVER

A graphic will display on the LCD screen of the player after a set amount of time during music playback. Activation time can be set from 0 (off) to 180 minutes.

I 5 Menu I

MENU-Display

SCROLL SPEED

Adjust scroll speed by 1x/2x/4x/VERTICAL/HORIZONTAL.

- VERTICAL : The scroll goes up and down.

- HORIZONTAL : The scroll goes from left to the right.

TAG INFORMATION

On : Display track with ID3 tag information. Off : Display track with file name.

- File name will be displayed by default for songs with no ID3 information

MENU-Display

PLAY TIME INFO

Normal : display elapsed time. Remaining : display remaining time. Time display may not be accurate for files encoded in

Variable Bit Rate formats.

MENU-Timer

SLEEP POWER OFF

Automatically turns the power off after a fixed time. (Time range can be set from 0 to 180 minutes by one minute increments.) Use the < / > switch to adjust time. Set BEEP ON/ OFF by pressing the <MENU>button.

BEEP ON : A beep sound will play 1 minute before power off. BEEP OFF : No beep sound is played.

- Once powered off, the sleep timer will reset to 0.

MENU-Timer

STOP POWER OFF

The player will power off after a specific time of inactivity (not playing music, recording, etc.).

1 - 60 minutes in 1 minute increments.

Set Time

Set the current date and time for the player.

I 5 Menu I

MENU-Timer

SET ALARM

The Alarm setting will power on the player at a specific time and play though the headphones.

Press < / > to select each item then +/- to adjust each. DAY : Alarm rings at the set time of the set day repeatedly. ALL : Alarm rings at the set time everyday.

MENU-Control

FAST SKIP SKIP

OFF : Skip doesn’t activate. 10 : Skip 10 tracks at time. DIRECTORY : Skip to previous or next folder.

MENU-Control

FAST SKIP SCAN SPEED

You can set fast scan speed into 1X / 2X / 4X / 6X,

MENU-Control

VOICE RECORDING MODE

You can adjust recording quality when recording voice. AGC ON : When recording voice, the recording level is

automatically controlled and recordings from long

distances are enhanced. AGC OFF : AGC(Automatic Gain Control) not activated. QUALITY : Controls voice recording quality as quality.

I 5 Menu I

MENU-Control

VOICE AUTO DETECT

The voice recording mode will automatically pause during silence. This is useful for recording over a long period of time to save memory.

OFF : Voice Auto Detection is disabled. DETECTION LEVEL : Set the relative level of sound needed to

activate the recorder. (Level 1- Level 10).

Record pause time : Set the number of seconds of silence to (second slider) record before pausing. (1-10 sec)

MENU-Control

PLAYBACK SPEED

You can set the playback speed for currently playing track to "slow" or "fast" from -9 to +9 speed level.

-9 : Very slow 0 : Normal

+9 : Very fast

MENU-Mode

REPEAT/SHUFFLE

Set the desired REPEAT/SHUFFLE play mode. Use +/- to select the mode and press MENU button to save your selection. (Refer to page 35 for a description of each mode.)

INTRO

OFF : Disables INTRO. ON : Plays the beginning 10 seconds of each track. HIGHLIGHT : Plays 10 seconds from 1 minute into each track in

sequential order.

STUDY

While playing, short slide of the < / > lever will skip the current track set time ahead or back. OFF : Study Mode is disabled. The range is 1~60 seconds.

I 5 Menu I

MENU-Mode

NAME

You can input your name or custom text. The saved text is displayed when playback stops.

Select Character

irive

Press and hold

Select character

Move cursor

Delete character

Change Character Set

Save and Exit

Press and hold

MENU-Sound

1. Select the frequency.

3. Save the setting and exit.

MENU-Sound

How to set Xtreme EQ

2. Adjust the level.

EQ SELECT

Select EQ type. Use the / or + / - button to select EQ type and press the “MENU” button to set it.

Xtreme EQ

You can adjust the sound to your preference. There are 5 band frequency steps, set from -15dB to +15dB by 3dB step.

Xtreme 3D DBE 설정 3D EQ 설정

Xtreme EQ

I 5 Menu I

MENU-Sound

Xtreme 3D

You can adjust the level of 3D sound (minimum, Natural, and Maximum). You can extend 3D sound by selecting Bass Boost or 3D EQ. You can also adjust the level of 3D sound with the

/ (or +,- ) lever.

Select DBE or 3D EQ with the <MENU> button.

DBE SETTING

You can select the Bass Center Band level from Band 1 to 4. You can also set the Bass Boost gain from 0 dB to 15dB by 3dB step. DBE (Dynamic Bass Enhancement) enhances Low & Middle frequencies and only operates when using Xtreme 3D.

MENU-Sound

3D EQ SETTING

You can adjust the sound to your preference. There are 5 band frequency steps, set from -15dB to +15dB by 3dB step.

SOUND BALANCE

Balance your sound to the right or left or keep it in the center according to your preference. When Sound Balance bar is moved to L (Left, 20), the sound outputs at the left earphone. When the lever is moved to R (Right, 20) the sound outputs at the right earphone. The default value is 0 and the sound outputs the same level at both earphones.

MENU-Sound

EQ LIMIT

ON : Limit the control of equalizer frequency to prevent

distortion of sound.

OFF : You can enjoy the original sound though distortion of

sound may occur.

BEEP VOLUME

Set beep volume “ON/OFF” or level. Set to "0" for OFF.

MENU-Sound

SOUND FADE IN

When activated, volume increases gradually at playback mode to prevent the sudden loudness.

I Using iriver Music Manager I

Managing File/Folder 56 Views 66 Wizard

68 Performance Maintenance 74 Additional Features 76 Using Help

iriver Manager for Mac OS 80

Chapter

Using iriver Music Manager - Managing File/Folder

Making a New Folder on the PC

Click the "New Folder" icon or select "File-New folder" in the file menu to make a new folder.

A new folder is created. Type the name in the new folder and press “Enter”.

Using iriver Music Manager - Managing File/Folder

Making a New Folder on the Player

Click the "New Folder" icon or select "File-New folder" in the file menu to make a new folder.

A new folder is created. Type the name in the new folder and press “Enter”.

Only 8 levels of subfolders are allowed, beginning with the Root (\) folder.

I 6 Using iMM I

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the PC

Select the files or folders to delete.

Select File - Delete in the file menu to delete files.

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the PC

Click "Yes" on the alert display to delete.3Files are deleted.

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the Player

Select File - Delete in the file menu to delete files.

Select the files or folders to delete.

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the Player

Click "OK" on the alert display to delete.3Files are deleted.

I 6 Using iMM I

Using iriver Music Manager - Managing File/Folder

Renaming Folder or File on the PC

Select file or folder to rename.

After selecting File - Rename, type the new name and press “Enter”.

Using iriver Music Manager - Managing File/Folder

Renaming Folder or File on the Player

Select file or folder to rename.

After selecting File - Rename, type the new name and press “Enter”.

You cannot change the extension of a file.

Using iriver Music Manager - Managing File/Folder

To view the Properties of a File (PC)

Select a file or folder to view.

Select “File” - “Properties” in the file menu to view the properties of the file.

Using iriver Music Manager - Managing File/Folder

To view PC Properties

The properties of the selected file are displayed.

I 6 Using iMM I

Using iriver Music Manager - Managing File/Folder

To view the Properties of a File (Player)

Select a file or folder to view.

Select “File” - “Properties” in the file menu to view the properties of the file.

Using iriver Music Manager - Managing File/Folder

To view the Properties of a File (Player)

The properties of the selected file are displayed.

Using iriver Music Manager - Managing File/Folder

Searching for Music Files

Click “Search” icon on the PC window.

Select the drive or folder to search.

Using iriver Music Manager - Managing File/Folder

Searching for Music Files

Click “Search” after typing the searching condition.

The search results are displayed. Click “Close” button to finish.

Search interface may look different depending on your Windows version.

I 6 Using iMM I

Using iriver Music Manager - Managing File/Folder

Uploading to the PC

Select the folders or files on the player to transfer to the PC. Click and drag to move folders or files to the desired location on the PC.

Upload is in processing.

Using iriver Music Manager - Managing File/Folder

Uploading to the PC

Upload is completed.

Music files (MP3, WMA, ASF) cannot be uploaded from the player to the PC in accordance with current copyright guidelines.

You can upload pictures, recorded files, or any data files to your PC.

MP3, WMA or ASF files may not be transferred to your PC from the player.

Using iriver Music Manager - Managing File/Folder

Changing the Position of Folders or Files on the Player

Drag and drop to move a folder or file to the desired location.

You may only move one file or folder at a time.

You cannot move files or folders to another folder.

Click [Name] in player window to sort files by name.

Using iriver Music Manager - Managing File/Folder

Moving to the Upper Folder (PC and Player)

Click the move to “upper folder” icon in the menu bar of the iriver Music Manager.

I 6 Using iMM I

Using iriver Music Manager - Managing File/Folder

Refresh (PC and Player)

Click the “Refresh” icon to display the contents of the PC or the player.

Note ...

Using iriver Music Manager - Views

Windows

Select “Align Horizontally” in the Windows menu to display the PC and player s windows horizontally.

Using iriver Music Manager - Views

Windows

Select “Align Vertically” in the Windows menu to display the PC and player windows Vertically.

I 6 Using iMM I

Using iriver Music Manager - Views

Windows

To make the PC side of iriver Manager active, click Window - PC

Using iriver Music Manager - Views

Windows

To make the player side of iriver Manager active, click Window - N10(: model name) v3.15(Connected)(: firmware version)

Using iriver Music Manager - Wizard

File Transfer Wizard

The file transfer wizard can help guide you through the process of copying songs to your player.

Click “ Tools-File Transfer Wizard ” on the menu or “ File Transfer Wizard ” icon on the Toolbar menu files or folders.

Using iriver Music Manager - Wizard

File Transfer Wizard

File Transfer Wizard window is displayed on the PC. Click “ Add Folder ” or “ Add File ” after selecting folder or file to transfer.

I 6 Using iMM I

Using iriver Music Manager - Wizard

File Transfer Wizard

Click “ Next ” after selecting files or folders.3Click “ Next ” after selecting the folder to be

transferred to the player or creating a folder on the player.

Selecting the location to save

Creating a new folder

Using iriver Music Manager - Wizard

File Transfer Wizard

File transferring is in processing. Click "Finish" after completing file transferring.

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ Tools-File Conversion Wizard ” on the menu or “ File Conversion Wizard ” icon on the Toolbar menu files to convert REC files to MP3 format.

File Conversion Wizard window is displayed. Click “ Select File ” to select the file to convert.

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “Open” and “Next” after selecting files.3To cancel the file conversion, click “Delete” after

selecting files to cancel.

You must first upload REC files from the player to your PC before converting them.

I 6 Using iMM I

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ Next ” after confirming the selected files.

Click “ Change ” to change the location to save after converting.

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ OK ” after selecting the location to save after converting.

Click “ Rename ” after selecting the file to be renamed.

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ Next ” after typing new file name.

Click “ OK ” to confirm it.

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “Next” after selecting whether deleting or not the original file.

File converting is in processing. Click “Finish” after completing file conversion.

I 6 Using iMM I

Using iriver Music Manager - Performance Maintenance

Firmware Upgrade (Manual)

Visit www.iriver.com to download the latest firmware for your player. Unzip the downloaded firmware file and double click the EXE file. A file called N10.HEX will be created in the same folder as the EXE file.

Using iriver Music Manager - Performance Maintenance

Firmware Upgrade (Manual)

Click “Tools-Firmware Upgrade” or “Firmware Upgrade” Icon on the Toolbox.

Click “Upgrade”.

Using iriver Music Manager - Performance Maintenance

Firmware Upgrade (Manual)

Locate and select the “N10.HEX” then click “Open”.

The window below is displayed as the firmware upgrade is in processing. Click [OK] after the player turns off.

Do not disconnect the player from the PC or remove the battery from the player during the firmware upgrade process.

Using iriver Music Manager - Performance Maintenance

Format Format will erase all the files and folders in your player's memory.

Click the “format” icon on the Toolbox to format.

The alert below is displayed. Click “OK” to initialize.

I 6 Using iMM I

Using iriver Music Manager - Performance Maintenance

Format

Formatting is in processing. Formatting is completed. Click “OK”.

Note ...

Using iriver Music Manager - Additional Features

Modifing ID3 tags

Click “Modify ID3 tags” icon after selecting a MP3 file .

Click [Save]. Modifing of ID3 tags is completed.

Type tag

information.

You can only modify the tag information of MP3 files and only files that are on your PC.

Using iriver Music Manager - Additional Features

Playing Music Files on the PC

Click “Musik Play” icon after selecting a file to play.

When you play a file, your default media player will open and begin playing the selected song.

I 6 Using iMM I

Using iriver Music Manager - Using Help

iriver Music Manager Help

Click “Help - About iriver Music Manager ”.1The version information of iriver Music Manager

is displayed. Click “OK” to exit.

Using iriver Music Manager - Using Help

iriver Music Manager Help

Click “Help - iriver Music Manager Help” in the menu.

Help screen about how to use "iriver Music Manager" program is displayed. Click head heading to read the details of the iriver Manager functions.

Using iriver Music Manager - Using Help

Printing iriver Music Manager Help

Click “Print” icon to print iriver Music Manager Help. Click “OK” after selecting the range to print.

Click “Print” after selecting the printer. Printing is started.

Using iriver Music Manager - Using Help

Viewing Firmware Information

Select “Help-Firmware Information” in the menu.

Information about Firmware is displayed. Click “OK” to exit.

I 6 Using iMM I

Using iriver Music Manager - Using Help

Connecting to iriver Website.

Click the Icon to connect to iriver Website.

Note ...

Using iriver Music Manager

Mac Software Installation (Mac OS 9.2)

Copy the "MAC OS - OS 9 - iriver MUSIC MANAGER FOR MAC OS-9.BIN" file on the installation CD-ROM in the MAC-OS folder to your desktop.

Double click the "iriver MUSIC MANAGER FOR OS 9.BIN" file to extract the VISE installation file for iriver Music Manager.

Using iriver Music Manager

Mac Software Installation (Mac OS 9.2)

System Requirements (Mac)

Mac OS 9.2.2 or later Mac OS X 10.2 or later CarbonLib 1.6 or later

CarbonLib Update Method

OS X : Apple Menu - System Preferences - System - Software Update OS 9 : Control Panels - Software Update

I 6 Using iMM I

Using iriver Music Manager

Mac Software Installation (Mac OS 9.2)

Double click the VISE icon to begin the installation.

Click "Install" after selecting the folder to install.

Using iriver Music Manager

Mac Software Installation (Mac OS X )

Double click the "MAC OS - OS X - iriver Music Manager for OS X.dmg" in the MAC-OS

folder on the installation CD-ROM." The “.dmg” file will mount a temporary "drive" icon called "iriver Music Manager”.

Open the iriver Music Manager "drive" and move the iriver Music Manger icon to your Dock or Desktop. Installation of iriver Music Manager for OS X is completed.

Using iriver Music Manager

Using iriver Music Manager on Mac

Adding new folder

Click New Folder icon in iriver Music Manager.

Refreshing Player

Click “Refresh” icon to display the contents of the player.

Using iriver Music Manager

Connecting to a Mac

Connect player to your Mac, and then run iriver Music Manager icon on Desktop.

I 6 Using iMM I

Using iriver Music Manager

Using iriver Music Manager on Mac

Deleting file or folder

After selecting the files or folders to delete, click “Delete” icon to delete.

Formatting Playe

Format will erase all files in your player memory. Click the “Format” icon to format.

Using iriver Music Manager

Using iriver Music Manager on Mac

Downloading from the Mac

After selecting the files or folders to download, drag and drop them to the iriver Music Manager screen. The selected songs will automatically download to the player.

Drag & Drop

Files with a name over 127 English characters (double byte: 63 characters) will not transfer.

Files over 511 English characters (including path name and file names) will not transfer.

The ROOT folder is limited to 1024 files and folders total. Subfolders do not have a limit to the number of files.

Using iriver Music Manager

Using iriver Music Manager on Mac

Uploading to the Mac

After selecting the files or folders to upload, drag and drop them to the folder to upload on the Mac.

Drag &

Drop

Music Files (MP3, WMA, ASF) can not be uploaded from the player to the Mac in accordance with current copyright guidelines.

REC files will be automatically converted to WAV format when uploaded to your computer.

Using iriver Music Manager

Firmware Upgrade

Download the latest Firmware from our website. Click “File - Firmware Update” on the menu.

Click “Open” after selecting file to update.

I 6 Using iMM I

Note ...

Using iriver Music Manager

Firmware Upgrade

While update is completed, the player is automatically turned off.

I Additional Information I

Precautions 88 Troubleshooting 91

Specifications 92

Chapter

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Do not place objects inside the device.

Damage to your player may result from improper use.

Keep away from harsh environments including humid, dusty, and smoky areas.

Do not place heavy objects on the device.

Damage to your player may result from improper use.

Avoid contact with water and other liquids and dry immediately with a soft cloth should contact occur.

Damage to your player may result from improper use.

Do not use chemicals and detergents since they deteriorate and peel off product's skin.

Damage to your player may result from improper use.

Do not use water or chemicals to clean the player. Clean the surface with a soft cloth.

Damage to your player may result from improper use.

I 7 Additional Information I

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Do not use excessive force on the buttons or attempt to disassemble the device.

Damage to your player may result from improper use.

Do not drop or subject the device to impact.

Damage to your player may result from improper use.

Keep out of direct sunlight and extreme heat and cold.

Damage to your player may result from improper use.

Keep the player away from strong magnets.

Damage to your player may result from improper use.

Do not disassemble or modify.

Damage to your player may result from improper use.

Included earphones include soft covers for your comfort. They may be used with or with out covers at your preference.

Keep headphones / earphones cords under control at all times.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Reduce volume while walking, especially at pedestrian crosswalk.

Do not use headphone / earphones at high volume. Hearing experts advise against listening to continuous, loud and extended play.

Reduce volume or stop using the player if you experience ringing in your ears. Hearing experts advise against listening to continuous, loud and extended play.

Do not use at high volume for continuous listening. Hearing experts advise against listening to continuous, loud and extended play.

It may cause your injured.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Cords may get caught on a variety of objects and cause damage or injury.

I 7 Additional Information I

Trouble Solution

No Power.

Check if battery is charged.

No sound or distortion

during playback.

Check if volume is set to "0". Check whether the plug is dirty. Clean the plug with a dry and soft

cloth.

Corrupted music files may make a static noise and the sound may cut

off. Listen to your files on the PC to see if they are corrupted.

Abnormal characters

in Screen.

Go to [Menu Setting] - [General Setting] - [Language] and check if language is correctly selected. (refer to page 43)

Trouble Solution

Failed download of

MP3 file

Check if battery is charged.

Check if USB cable between PC and your player is correctly connected.

Player will not

charge.

Battery may be fully changed. A fully charged battery will not accept additional charging.

Check if USB cable is correctly connected.

Additional Information

Troubleshooting

Additional Information

Troubleshooting

Additional Information

Specifications

Category Item Specifications

20 Hz ~ 20 KHz (L)18 mW + (R)18 mW (16Ohm) max. Volume 90 dB(MP3) MPEG 1/2/2.5 Layer 3, WMA, ASF 8 Kbps ~ 320 Kbps ID3 VI, ID3 V2 2.0, ID3 V2 3.0, ID 3 V2 4.0 16 Gray Organic EL Display 40 Languages

Approx. 11 hours (128 kbps, MP3, Volume 20, EQ Normal, LCD off) Approx. 7 hours (

192 kbps, MP3, Volume 20, EQ Xtreme 3D, After 30 min LCD off

)

27.2(W) x 49.8(D) x 13.3(H) mm (Body)

27.2(W) x 62.5(D) x 13.3(H) mm (type A - cap inclusion) 22g (Body with Battery)

28.5g (Body with Battery, type B - cap inclusion ) Lithium Polymer battery

-5 °C ~ 40 °C

Audio

File Type

Tag Info

Display

Language

Voice Recording

Max. Playtime

Playtime (Normal Use)

Dimensions

Weight

Battery

Operational Temperature

Frequency Range Headphone Output S/N Ratio File Type Bit Rate

Approx. 9:00 hrs

(32kbps, 128 MB)

Approx. 18:00 hrs (32kbps, 256 MB)

Approx. 36:00 hrs (32kbps, 512 MB)

Note ...

IRiver N10 512MB, N10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual