Getting Started Guide
Installation
Install both the Mobile Note Taker and IRISnotes Executive. You will be asked to activate the Executive on first use.
Click the Activate button and choose over the internet. Advance and enter the serial number on the CD sleeve and
click activate.
Go to Start > All Programs to see these installed
programs.
Offline notes – Receiver not connected
Charge the device by plugging it into a USB port directly on the computer.
You will see the battery indicator on the upper right of the LCD screen.
When the pen is brought in proximity to the unit you will see a pen icon
appear indicating that it is ready to receive the notes.
Place the receiver at the middle top of a legal pad or similar. You would
then take your notes in neat and well-spaced handwriting. When you fill up the page you hold down the button on
the receiver until the number increments from 0 to 1. Continue taking notes pressing the button to increment to the
next page until done. Page 0 is the first page; Page 1 is the second, etc.
Note the clear files and Launch
Choose File name prefix, the orientation of
Connect the Receiver and you should see the My Script Ink Retriever window appear.
If not go to; Start > All Programs > Iris > MyScript Ink Retriever as pictured above
You would choose the Storage folder in the Retrieval tab would set the orientation that you used in the Pegasus Tab.
Click on Download Ink to offload the files from the Receiver.
automatically check boxes.
the receiver and then click Download Ink.
For Vist a/Windows 7 the r eceive r
must be used a nd se t to middle
top.
Start the IRISnotes Executive and it should find the notes automatically and import them in. Click Yes to All to bring
them into the software.
You will see this window with the various notes available for selection and folders to the left. Double click on a note
and then click on the Conversion settings button to set your options.
Loading...