English English
This Quick User Guide helps you get started with IRIScanTM Mouse Executive 2.
The descriptions in this documentation are based on the Windows® 7 and Mac® OS X
Mountain Lion Operating Systems. Please read this guide before operating this scanner
and its software. All information is subject to change without prior notice.
Should you experience issues when using the IRIScanTM Mouse, consult the Frequently
Asked questions or contact Technical Support at www.irislink.com/support.
Table of Contents
1. Introduction
2. Hardware Overview
3. Installing the IRIScanTM Mouse application
3.1 Installation on Windows
3.2 Installation on Mac OS
4. Using the IRIScanTM Mouse
Step 1: Scan documents
Step 2: Edit the scanned documents
Step 3: Save and share the scanned documents
1
English English
1. Left button
2. Wheel
3. Right button
4. Scan button
5. Scan surface indicators
6. Laser sensors
7. Scan surface
Remove the film before scanning
8. Mouse label
1. Introduction
The IRIScanTM Mouse is a mouse and scanner combined. With the scan function, you can
scan documents by sliding the mouse over them.
The scan results can be saved in several ways. You can drag-and-drop them to file
folders and applications. Save them directly as Doc, PDF and XML files. Share them via
Mail, Facebook©, Twitter© and Flickr©. And send them to apps such as CardirisTM,
Dropbox©, Evernote© and Google© Translate.
2. Hardware Overview
3
English English
3. Installing the IRIScanTM Mouse application
Important Notes:
Make sure you have the required administration rights on your computer to do the
installation.
Make sure to install CardirisTM before you install the actual IRIScanTM Mouse application, as
explained below. Otherwise IRIScanTM Mouse will not be able to send scanned documents
to CardirisTM.
3.1 Installation on Windows
Installation from CD-ROM:
1. Insert the IRIScan
TM
Mouse disc in the CD-ROM drive of the computer.
The installation menu is displayed automatically.
In case the menu does not start automatically, run setup.exe from the disc.
2. Click Cardiris
TM
Pro 5. Then follow the on-screen instructions.
3. Return to the installation menu and click IRIScan
follow the on-screen instructions.
4. Click Finish to complete the installation.
5. Unplug your regular mouse. Plug in the IRIScan
2.0 or higher). The driver is installed automatically within a few seconds.
TM
Mouse Executive 2. Again
TM
Mouse in a free USB port (USB
5
Loading...