IPSI HUP80-32S, HUP80-36-1, HUP80-36-1S, HUP80-36-3, HUP80-36-3S Datasheet

HUP80.qxd 23/6/03 2:19 pm Page 1

AC/DC External Desktop

80 Watts		XPiQ inc.
HUP80 Series		Intelligent Design Quality Product
•		Meets EN61000-3-2
		•
		Built-in EMI Filter
		•
		100% Burn-in
		•
		Input Surge Current Protection
		•
		CE Mark
		•
		Approved to UL, CSA and TUV
		Safety Standards
		•
		Wide Input Voltage 90-264 VAC

Specification

All specifications typical at nominal line, full load and 25°C

Input

Input Voltage	•	90-264 VAC
Input Frequency	•	47 to 63 Hz
Input Current	•	1.9A maximum

Output

Output Voltage:	•	See Tables
Output Current	•	See Tables
Output Power Range	•	0 to 80 Watts
Ripple and Noise	•	1% peak to peak max.
Overvoltage	•	Provided on output #1 only set at
Protection		112-132% of its nominal voltage
Overcurrent	•	All outputs protected to short
Protection:		circuit conditions
Temperature	•	All outputs ±0.04%/°C
coefficient:		maximum
Transient Response	•	Maximum excursion of 4% or better
		on all models. Recovers to 1% of final
		value within 500 µs after a 25% step
		load change

Environmental

Operating	•	0 °C to +70 °C, derate linearly from
Temperature		100% load at +40 °C to 50% load
		at +70 °C
Storage	•	-40 °C to +85 °C
Temperature
MTBF	•	100,000 hours minimum at full load
		at 25 °C ambient

EMC & Safety

EMI Requirement	•	Meets conducted and radiated
		limits of
		a) FCC Part 15 Class B
		b) CISPR 22 Class B
Safety Requirements	•	Approved to:
		a) UL 1950
		b) CSA C22.2 No. 234 per cUL
		c) EN60950

General
Efficiency	•	83% typical
Hold-up time	•	12 msec minimum
Line Regulation	•	±1% maximum at full load
Inrush Current	•	15A max. at 115 VAC or
		30A max. at 230 VAC cold start
Withstand Voltage	•	3000 VAC from input to output
		1500 VAC from input to ground
		500 VAC from output to ground
Insulation Resistance	•	100 Mohm minimum from
		output to ground

•			PH: 508	429.9883	•
			FAX: 800	226.2100
71 www.XPiQ.com			Email: [e-mail]
			Holliston, MA 01746 USA