IPSI HUP45-00, HUP45-02, HUP45-10, HUP45-10-1, HUP45-11 Datasheet

141-142HUP45 24/5/02 11:49 am Page 1

				AC/DC Desktop
	XPiQ inc.			45 Watts
				HUP45 Series
	Intelligent Design Quality Product
		•		Built-in EMI Filter
				•
				100% Burn-in
				•
				Input Surge Current Protection
				•
				CE Mark
				•
				Approved to UL, CSA and TUV
				Safety Standards
				•
				Short Circuit Protection

Specification

All specifications typical at nominal line, full load and 25°C

Input

Input Voltage	•	90-264 VAC
Input Frequency	•	47 to 63 Hz
Input Current	•	1.2A maximum

Output

Output Voltage:	•	See Tables
Output Current	•	See Tables
Output Power Range	•	0 to 50 Watts
Ripple and Noise	•	1% peak to peak max.
Overcurrent	•	All outputs protected to short
Protection:		circuit conditions
Temperature	•	All outputs ±0.04%/°C
coefficient:		maximum
Transient Response	•	Maximum excursion of 4% or
		better on all models. Recovers
		to 1% of final value within
		500µs after a 25% step load
		change

General

Efficiency	•	83% typical
Hold-up time	•	16msec minimum

Line Regulation	•	±0.5% maximum at full load
Inrush Current	•	15A at 115			VAC or
		30A at 230			VAC at 25°C
		cold start
Withstand Voltage	•	3000		VAC from input to output
		1500		VAC from input to ground
		500	VAC from output to ground
Insulation Resistance	•	100	Mohm minimum from
		output to ground

Environmental

Operating	•	0°C to +70°C*
Temperature
Storage	•	-40°C to +85°C
Temperature
MTBF	•	100,000 hours minimum at full load
		at 25°C ambient
EMI Requirement	•	Meets conducted and radiated
		limits of
		a) FCC part 15 Level B
		b) CISPR 22 Class B
Safety Requirements	•	Approved to:
		a) UL 1950
		b) CSA C22.2 No. 234 per cUL
		c) EN60950

* Derate linearly from 100% load at 40°C to 50% load at 70°C

•	PH: 508	429.9883	•
	FAX: 800	226.2100
141 www.XP-iQ.com	Email: [e-mail]
	Holliston, MA 01746 USA