Specifications and Main Features
- Model Options:
- DP460: Base model
- DP461: Model With Alarm Option
- DP462: Model with Multi-Input Option
- Sensor Compatibility: Accepts National Bureau of standards NBS thermocouple types J,K,T,E, S,R and B; 3 wire platinum resistance temperature detector RTD sensors alpha = .00385 or .00392 .
- Display: Single Channel, 4 digit instrument.
- Maximum resolution and accuracy (0.1° and 1° accuracy) auto range display is provided.
- Calibration: Only when switching from thermocouple to RTD or RTD to thermocouple.
- Power Supply:
-115VAC 10%, 50-60Hz or 230VAC 10%, 50-60Hz (jumper selectable).
- Input Range:
- Thermocouple Inputs:
- Type K: -270 to 1260C / -454 to 2300F
- Type J: -210 to 1200 C / -346 to 2192 F
- Types S,R,B: Up to 1769 C / 3216 F
- RTD (PT100) Inpu:
- -200 to 850.8 C / -328 to 1563 F.
- Accuracy:
- Thermocouple: +/- 1 Degree Plus 0.03% RDG For J,K,T,E.
- RTD: RDG Plus 1 Degree Plus 0.08% RDG.
- Noise Rejection:
- NMRR: >=60db @ 50/60Hz
- CMRR: >=120db @ 50/60Hz
- Environmental:
- Parameters: Operation temperature Range: 5 to 45 °C Relative humidity 10% to 80% RH non-condensing
- Storage Temperature: -40 to 65 °C
- Dimensions:
- Bezel: 96 mm W x 48 mm H
- Case: 92 mm W x 40 mm H x 136 mm D
- Installed Weight: Maximum 454 kg / 1 lb
Frequently Asked Questions
Q: Which sensors can be used with DP460 Series Indicator?
A: DP460 Series Indicator can be used with thermocouples J, K, T, E, S, R, or B, and also with 3 wire RTD sensors with alpha = .00385 or .00392.
Q: How do I change from a thermocouple to an RTD input?
A: A change in position of an internal jump jack on the circuit board will help you change from sounding thermocouples to Rtd inputs.
Q: DP460 Series Indicator requires what?
A: 115VAC +10%, 50-60Hz or 230VAC +10%, 50-60Hz are jumper selectable maximum power requirements for the DP460 Series Indicator.
Q: How often should the indicator be calibrated?
A: The indicator can be calibrated once when a year or after changing from thermocouple to RTD types and vice versa.
Q: What is the measurement accuracies for thermocouple and RTD inputs?
A: For thermocouple inputs, e.g. J, K, T, E the accuracy is ±1° and an additional 0.03% RDG. As for RTD inputs, PT100 the accuracy remains at ±1° and an additional 0.08% RDG.
Q: Does The DP460 Series Indicator read in Fahrenheit or Celsius or both?
A: The display is able to toggle between Carnot’s two temperature scales.
User Manual
Loading...