Iomega CDU24X10QI User Manual

Quick Install

Plus

Easy Instructions for

Creating CDs

USB 2.0

TM

2

Install Drive

IMPORTANT:

USB 2.0 is a very new technology. Since most computers will not have native
support for USB 2.0, you must install a USB 2.0 adapter card for your
Iomega

®

CD-RW USB drive to run at USB 2.0 speeds. If you do not have a
USB 2.0 card installed, the Iomega CD-RW USB drive will still work connected
to a standard USB connection at standard USB speeds.

PC Users—After installing a USB 2.0 adapter card, make sure there are no
exclamation marks under Universal Serial Bus Controllers in the device
manager.
To find out:

1. Right click

My Computer and select Properties.

2. Select the Device Manager tab.

3. Scroll down until you find the Universal Serial Bus Controllers. Click the
plus sign next to it and make sure there are no yellow exclamation
marks.

4. If there is a yellow exclamation mark or if

Universal Serial Bus

Controllers does not appear in Device Manager after installing the USB

2.0 card, contact the card’s manufacturer for help.

Mac Users—USB 2.0 support depends on the USB 2.0 adapter card you
use. Consult the card’s manufacturer for more information.

Install Drive

3

Unpack your Iomega®CD-RW USB drive, start your
computer, wait for the operating system to load,
then insert the Solutions CD.

The Solutions CD menu should open automatically when you insert the CD.
If it does not, double-click the Solutions CD icon in My Computer, then
double-click the Start icon. Mac

®

users double-click the Solutions CD icon

on the desktop, then double-click the Start icon.

1

4

Install Software

2

Install the Iomega®HotBurn®Software.

Click the Iomega HotBurn button. Select Click to Install to start the
HotBurn software installation. The HotBurn software contains the system
software necessary to use your CD-RW drive.
For more detailed installation instructions or troubleshooting information
select the

User’s Manual and print the pages you need.

Follow the instructions on the screen to install the software, then shut

down your computer before connecting the CD-RW drive.

5

Install Drive

OPTIONAL: Connect the included audio cable to
the back of the drive.

NOTE: The headphone jack is located on the front of the drive. Plug in

headphones only while listening to audio CDs.

3