8*8W RGBW 4in1 LED Moving Head Beam Light
User Manual
Please read this manual carefully before use!
1
Thank you for purchasing this product. To optimize the performance of this product,prior to
Verify that the voltage matches the rated voltage.
When the voltage is 110V , Do not connect more than 10 lightings in total to AC mains power
When the voltage is 220V , Do not connect more than 20 lightings in total to AC mains power
Before using the fixture, check that all power distribution equipment and cables are in perfect
Always ground (earth) the fixture electrically .
Avoiding hit the Light when you are move or install the light .
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher
The Maximum surface temperature is 50°C
use,please read these operating instructions carefully to familiarise yourself with the basic
operation of this unit.Please keep the manual in safe price for future reference.
This unit has been tested at our factory before being shipped to you, there is no assembly
required.
Once after received this product , please take and put carefully. And check cautiously that
whether the product was damaged or not during the transportation.
Checking Parts
Please check if the following parts are included:
1 x LED light
1 x User manual
1 x Power cable
1 x DMX cable
1 x Safety robe
2 x Quick lock handle
Safety Instructions
important
Every person involved with the installation , operation and maintenance of this device has to be
qualified and follow the instructions of this manual . Manufacturer will not with responsibility for
those operation not according to this Instruction
in one interconnected daisy chain
in one interconnected daisy chain
condition and rated for the current requirements of all connected devices.
than this .
2
Installation Instruction
The minimum distance between light-output and the illuminated surface must be more than
When suspending the fixture above ground level, verify that the structure can hold at least 10
d001
001-512
A001
38CH
10CH
001-512
Au01-22
Au01
Effect 1
Au02
Effect 2
Au022
Effect 22
Sond
Sound active
SP01
01-08
Speed adjustment
rPoF
OFF
Motor’s positive rotation
ON
Motor’s negative rotation
...
...
M000
0-255
Motor’s deflection angle
E
A B C D
A．Function button （MENU）
B．UP button（UP）
C．DOWN button（DOWN）
D. Enter button（ENTER）
E．LED display
0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at least 0.5
meters away from the fixture .
times the weight of all installed devices.
Display Function Instruction
Instructions: press A ( MENU button) to show 5 different functions, the front 2 digital means the
current function (see following chart). The last 2 digital means address, speed . Press B(UP
button) or C (DOWN button) to change the data, press D (Enter button) to confirm.
Operation Menu:
3
DMX512 38 Channels Description
Channel Value Function
1 0-255 Pan
2 0-255 Pan speed
3
0-10 5-38 channel work
11-22 Built-in effect1
21-31 Built-in effect 2
32-42 Built-in effect3
43-53 Built-in effect4
54-64 Built-in effect5
65-75 Built-in effect6
76-86 Built-in effect7
87-97 Built-in effect8
98-108 Built-in effect9
109-119 Built-in effect10
120-130 Built-in effect11
131-141 Built-in effect12
142-152 Built-in effect13
153-163 Built-in effect14
164-174 Built-in effect15
175-185 Built-in effect16
186-196 Built-in effect17
197-207 Built-in effect18
208-218 Built-in effect19
219-229 Built-in effect20
230-240 Built-in effect21
241-250 Built-in effect22
251-255 Sound active effect
4 0-255 Built-in effect speed adjustment
5 0-255 Dimmer
6 6-255 Strobe from slow to fast
7 0-255 Red dimmer
8 0-255 Green dimmer
9 0-255 Blue dimmer
10 0-255 White dimmer
11 0-255 Red dimmer
12 0-255 Green dimmer
13 0-255 Blue dimmer
14 0-255 White dimmer
...... 0-255 Red dimmer
35 0-255 Red dimmer
36 0-255 Green dimmer
37 0-255 Blue dimmer
38 0-255 White dimmer
4
DMX512 10 Channels Description
Channel Value Function
1 0-255 Pan
2 0-255 Pan speed
3 0-255 Built-in effect
4 0-255 Built-in effect speed adjustment
5 0-255 Dimmer
6 6-255 Strobe from slow to fast
7 0-255 Red dimmer
8 0-255 Green dimmer
9 0-255 Blue dimmer
10 0-255 White dimmer
Notes:Setting master-slave:Set master machine at Au01,Au02,Au03...Au22 and slave machine
at d001/A001. Just one light could be settled to be master.
Maintenance
Maintenance should be performed every 15-day period, by using a sponge which is dipped with
alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
Always disconnect from the mains when the device is not in use or before cleaning it.
Warning
Power must be disconnected before maintenance or repair. Do not look at the light source
directly
To prevent or reduce the risk of electrical shock or fire.do not expose this unit to high
temperature/rain or moisture.
Note
Don't separate machine from light source and repair them by yourself , otherwise no good repair
service will be supplied.
Technical Specifications
1. Power supply: 100~240VAC ，50~60Hz
2. Rated power: 90W
3. Lamp spec: 8*8W RGBW 4in1 LED
4. Control signal: DMX512 signal
5. Control mode: Sound Active/ Auto-play/DMX512/Master-Slave
6. Channel:10/38
7. Protection rate: IP20
8. Max operating temperature: 40°
5
Declaration
This product is made of high-brightness transistor. We will provide 1 year warranty
under the condition that user has operated the light normally and lifetime service. We
won't provide warranty if the damage is caused by artificial or force majeure event. Cost
of fittings should be charged by user if product need maintenance after 1 year .Please
cut this warranty card and shipped it along with the product to our factory when applying
for warranty.
Product
：
Purchasing date
：
Code of invoice
：
Warranty date: From To
User’s name
：
Add
：
Company： Tel：
This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
We cannot be made liable for damages caused by incorrect installations and unskilled operation!
Warranty Card
Loading...