Page 1
9. Maintenance and Cleaning
The following points have to be considered during the inspection:
1. All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded. 2. There must not be any deformations on the housing, color lenses,
fixations and installation spots (ceiling, suspension, trussing). 3. Mechanically moved parts
must not show any traces of wearing and must not rotate with unbalances. 4. The electric
power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakness of the lights
due to accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the
circuit contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never
use alcohol or solvents. There are no serviceable parts inside the device. Please refer to the
instructions under “Installation instructions”. Should you need any spare parts, please order
genuine parts from your local dealer
.11.
MH MATRIX25 moving head
25pcs 12W CREE RGBW 4-in-1
User Manual
KEEP THIS MANUAL FOR FUTURE NEEDS
Page 2
1. Unpacking
Thank you for choosing LED matrix moving head. For your own safety, please read this
manual before installing the device. This manual covers the important information on installation
and applications. Please install and operate the fixture with following instructions. Meanwhile,
please keep this manual well for future needs.
LED Matrix moving head is made of a new type of high temperature strength of engineering
plastics and cast aluminum casing with nice outlook. The fixture is designed and manufactured
strictly following CE standards, complying with international standard DMX512 protocol. It’s
available independently controlled and linkable with each other for operation. And it is applicable
for large-scale live performances, theater, studio, nightclubs and discos.
4-IN-1 LEDs(RGBW) which features high brightness and stability. Please carefully unpack it
when you receive the fixture and check whether it is damaged during the transportation. And
please check whether the following items are included inside the box:
Moving Head---------
One
Signal Cable
----One
Hanging Bracket-----
Two
Power Cable----
One
Safety Cable---------
one
User Manual----
One
8. Key Features
Voltage: AC90-260V,50-60Hz
Power: 400W
Led source: 25pcs 12W CREE RGBW 4-in-1 LEDs
Channel: 19/29/117 three channels modes
Control: DMX/Master-slave/Auto/Sound activated
Pan: Unlimited+16bit fine
Tilt: Unlimited+16bit fine
Beam angle: 7°
Dimmer: 0-100% linear dimming
Strobe: 0-25 Hz
Function
1. Each LED controllable individually to bring more options designing.
2. Super fast unlimited Pan/Tilt movement to bring more dynamic effect.
3. Super low noise with as many as 117 channels to bring an unprecedented experience.
4. The excellent beam wash and effect light for big event and high level club, bar, etc.
.1. .10.
Page 3
117 Channels mode
CH
Function
value
Details
1 Pan movement
0-255
0~540 degree
Unlimited Pan
0-55 Tilt non movement
2 56-155
Pan unlimited clockwise rotate slow to fast
movement
156-255
Pan unlimited reversely rotate slow to fast
3 Pan fine
0-255 16 bit Pan fine adjustment
4 Tilt
0-255
0~270 degree
Unlimited Tilt
0-55 Pan non movement
5 56-155
Tilt unlimited clockwise rotate slow to fast
movement
156-255
Tilt unlimited reversely rotate slow to fast
6 Tilt fine
0-255 16 bit Tilt fine adjustment
7 Pan/Tilt speed
0-255
From fast to slow
8 Dimmer
0-255 Linear dimmer from dark to bright
0-3
No function
9 Strobe
4-95
Strobe with the same step from slow to fast
96-176
Random strobe
177-255
Thunder strobe
10 R1 dimmer
0-255 LED 1 Red dimmer from dark
to bright
11 G1 dimmer
0-255 LED 1 Green dimmer from dark to bright
12 B1 dimmer
0-255 LED 1 Blue dimmer from dark to bright
13 W1 dimmer
0-255 LED 2 white dimmer from dark to brigh
…… ……
……
……
…… ……
……
……
106
R25 dimmer
0-255 LED 25 Red dimmer from dark to bright
107
G25 dimmer
0-255 LED 25 Green dimmer from dark to bright
108
B25 dimmer
0-255
LED 25 Blue dimmer from dark
to bright
109
W25 dimmer
0-255 LED 25 white dimmer from dark to bright
Effect show of
0-89 Effect show of numbers from 0 to 9
110
numbers and
90-233
Effect show of punctuations
punctuations
234-235
Running water effect
111
Effect show of
0-234 Effect show of letters from A to Z
letters
234-235
Running water effect
112
Effect show of
0-234 Effect show of static gobos
static gobos
234-235
Running water effect
113
Color of letters
0-255 Color choice for the letters
114
Dynamic gobos
0-234 Effect show of dynamic gobos
show
234-235
Running water effect
115
Speed of effects
0-255
From fast to slow
0-49
No function
50-74
Numbers and punctuations show(Against CH
12)
116
Macro Function
75-99 Letters show(Operate against CH 13)
100-124
Static gobos show(Operate against CH 14)
125-149
Dynamic gobos show(Operate against CH 16)
150-199
Auto Run
200-255
Sound activated
117
Reset
0-250
No function
251-255
Reset within 3 seconds
2. Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure
a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not
switch it on immediately. The arising condensation could damage the device. Leave the device
switched off until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the
case, replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does
not necessarily mean that the device is defective, it should decrease gradually. Please don't
project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall
for smooth air flow, so there should be no shelter for fans and ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by
the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
.9. .2.
Page 4
3. Fixture instruction
29 channels mode:
CH
Function
value
Details
1 Pan movement
0-255
0~540 degree
Unlimited Pan
0-55
Tilt non movement
2
56-155 Pan unlimited clockwise rotate slow to fast
movement
156-255
Pan unlimited reversely rotate slow to fast
3 Pan fine
0-255
16 bit Pan fine adjustment
4 Tilt
0-255
0~270 degree
Unlimited Tilt
0-55
Pan non movement
5
56-155 Tilt unlimited clockwise rotate slow to fast
movement
156-255 Tilt unlimited reversely rotate slow to fast
6 Tilt fine
0-255
16 bit Tilt fine adjustment
7 Pan/Tilt speed
0-255
From fast to slow
8 Dimmer
0-255 Linear dimmer from dark to bright
0-3
No function
9 Strobe
4-95 Strobe with the same step from slow to fast
96-176
Random strobe
177-255
Thunder strobe
10
R1 dimmer
0-255 Area 1 Red dimmer from dark
to bright
11
G1 dimmer
0-255 Area 1 Green dimmer from dark to bright
12
B1 dimmer
0-255 Area 1 Blue dimmer from dark to bright
13
W1 dimmer
0-255 Area 1 white dimmer from dark to brigh
14
R2 dimmer
0-255 Area 2 Red dimmer from dark
to bright
15
G2 dimmer
0-255 Area 2 Green dimmer from dark to bright
16
B3 dimmer
0-255 Area 2 Blue dimmer from dark to bright
17
W4 dimmer
0-255 Area 2 white dimmer from dark to brigh
18
R3 dimmer
0-255 Area 3 Red dimmer from dark
to bright
19
G3 dimmer
0-255 Area 3 Green dimmer from dark to bright
20
B3 dimmer
0-255 Area 3 Blue dimmer from dark to bright
21
W3 dimmer
0-255 Area 3 white dimmer from dark to brigh
Effect show of
0-89 Effect show of numbers from 0 to 9
22
numbers and
90-233 Effect show of punctuations
punctuations
234-235
Running water effect
23
Effect show of
0-234 Effect show of letters from A to Z
letters
234-235
Running water effect
24
Effect show of
0-234 Effect show of static gobos
static gobos
234-235
Running water effect
25
Color of letters
0-255
Color choice for the letters
26
Dynamic gobos
0-234 Effect show of dynamic gobos
show
234-235
Running water effect
27
Speed of effects
0-255
From fast to slow
0-49
No function
50-74
Numbers and punctuations show(Against CH 12)
75-99 Letters show(Operate against CH 13)
28 Macro Function
100-124 Static gobos show(Operate against CH 14)
125-149 Dynamic gobos show(Operate against CH 16)
150-199
Auto Run
200-255
Sound activated
29 Reset
0-250
No function
251-255
Reset within 3 seconds
.3. .8.
Page 5
7. DMX channels
CH
Function
value
Details
1
Pan movement
0-255
0~540 degree
Unlimited Pan
0-55
Tilt non movement
2
56-155 Pan unlimited clockwise rotate slow to fast
movement
156-255
Pan unlimited reversely rotate slow to fast
3
Tilt
0-255
0~270 degree
Unlimited Tilt
0-55
Pan non movement
4
56-155 Tilt unlimited clockwise rotate slow to fast
movement
156-255
Tilt unlimited reversely rotate slow to fast
5
Pan/Tilt speed
0-255
From fast to slow
6
Dimmer
0-255
Linear dimmer from dark to bright
0-3
No function
7
Strobe
4-95 Strobe with the same step from slow to fast
96-176
Random strobe
177-255
Thunder strobe
8
R dimmer
0-255 Red dimmer from dark to bright
9
G dimmer
0-255
Green dimmer from dark to bright
10 B dimmer
0-255
Blue dimmer from dark to bright
11 W dimmer
0-255
white dimmer from dark to brigh
Effect show of
0-89 Effect show of numbers from 0 to 9
12 numbers and
90-233
Effect show of punctuations
punctuations
234-235
Running water effect
13 Effect show of
0-234
Effect show of letters from A to Z
letters
234-235
Running water effect
14 Effect show of
0-234
Effect show of static gobos
static gobos
234-235
Running water effect
15 Color of letters
0-255
Color choice for the letters
16
Dynamic gobos
0-234
Effect show of dynamic gobos
show
234-235
Running water effect
17 Speed of effects
0-255
From fast to slow
0-49
No function
50-74 Numbers and punctuations show(Against CH 12)
75-99
Letters show(Operate against CH 13)
18 Macro Function
100-124
Static gobos show(Operate against CH 14)
125-149
Dynamic gobos show(Operate against CH 16)
150-199
Auto Run
200-255
Sound activated
19 Reset
0-250
No function
251-255
Reset within 3 seconds
4. Operation Instructions
-The moving head is for wash effect for on-site decoration purpose.
-Don’t turn on the fixture if it’s been through severe temperature difference like after transportation
because it might damage the light due to the environment changes. So make sure to operate the
fixture until it is in normal temperature.
-This light should be keep away from strong shaking during any transportation or movement.
-Don’t pull up the light by only the head, or it might cause damages to the mechanical parts.
-Don’t expose the fixture in overheat, moisture or environment with too much dust when installing it.
And don’t lay any power cables on the floor. Or it might cause electronic shock to the people.
-Make sure the installation place is in good safety condition before installing the fixture.
-Make sure to put the safety chain and check whether the screws are screwed properly when installing
the fixture.
-Make sure the lens are in good condition. It’s recommended to replace the units if there are any
damages or severe scratch.
-Make sure the fixture is operated by qualified personnel who knows the fixture before using.
-Keep the original packages if any second shipment is needed.
-Don’t try to change the fixtures without any instruction by the manufacturer or the appointed
repairing agencies.
-It is not in warranty range if there are any malfunctions from not following the user manual to operate
or any illegal operation, like shock short circuit, electronic shock, lamp broke, etc.
5. Mounting and Installation
Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or
in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a minimum
point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an appropriate
safety cable.
.7. .4.
Page 6
Never stand directly below the device when mounting, removing, or servicing the fixture from a
periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power cord to
the appropriate wall outlet.
Clamp Mounting: The LED Matrix moving head provides a unique mounting bracket assembly that
integrates the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in
one unit (see the illustration below). When mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega bracket using a M10 screw fitted through the center
hole of the “omega bracket”. As an added safety measure be sure to attached at least one properly
rated safety cable to the fixture using on of the safety cable rigging point integrated in the base
assembly
Regardless of the rigging option you choose for our Matrix moving head , always be sure to secure
your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the
hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety
cable and never secure a safety cable to a carrying handle.
.5.
6. Menu Operations
Button instruction:
MENU UP DOWN ENTER
Operate instruction details
.6.
Loading...