involight MH MATRIX25 User Manual

9. Maintenance and Cleaning

The following points have to be considered during the inspection:

1. All screws for installing the devices or parts of the device have to be tightly connected and

must not be corroded. 2. There must not be any deformations on the housing, color lenses,

fixations and installation spots (ceiling, suspension, trussing). 3. Mechanically moved parts

must not show any traces of wearing and must not rotate with unbalances. 4. The electric

power supply cables must not show any damage, material fatigue or sediments.

Further instructions depending on the installation spot and usage have to be adhered by a

skilled installer and any safety problems have to be removed.

In order to make the lights in good condition and extend the life time, we suggest a regular

cleaning to the lights.

1) Clean the inside and outside lens each week to avoid the weakness of the lights

due to accumulation of dust.

2) Clean the fan each week.

3) A detailed electric check by approved electrical engineer each three month, make sure that the

circuit contacts are in good condition, prevent the poor contact of circuit from overheating.

We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never

use alcohol or solvents. There are no serviceable parts inside the device. Please refer to the

instructions under “Installation instructions”. Should you need any spare parts, please order

genuine parts from your local dealer

.11.

MH MATRIX25 moving head

25pcs 12W CREE RGBW 4-in-1

User Manual

KEEP THIS MANUAL FOR FUTURE NEEDS

1. Unpacking

Thank you for choosing LED matrix moving head. For your own safety, please read this

manual before installing the device. This manual covers the important information on installation

and applications. Please install and operate the fixture with following instructions. Meanwhile,

please keep this manual well for future needs.

LED Matrix moving head is made of a new type of high temperature strength of engineering

plastics and cast aluminum casing with nice outlook. The fixture is designed and manufactured

strictly following CE standards, complying with international standard DMX512 protocol. It’s

available independently controlled and linkable with each other for operation. And it is applicable

for large-scale live performances, theater, studio, nightclubs and discos.

4-IN-1 LEDs(RGBW) which features high brightness and stability. Please carefully unpack it

when you receive the fixture and check whether it is damaged during the transportation. And

please check whether the following items are included inside the box:

Moving Head---------

One

Signal Cable

----One

Hanging Bracket-----

Two

Power Cable----

One

Safety Cable---------

one

User Manual----

One

8. Key Features

Voltage: AC90-260V,50-60Hz

Power: 400W

Led source: 25pcs 12W CREE RGBW 4-in-1 LEDs

Channel: 19/29/117 three channels modes

Control: DMX/Master-slave/Auto/Sound activated

Pan: Unlimited+16bit fine

Tilt: Unlimited+16bit fine

Beam angle: 7°

Dimmer: 0-100% linear dimming

Strobe: 0-25 Hz

Function

1. Each LED controllable individually to bring more options designing.

2. Super fast unlimited Pan/Tilt movement to bring more dynamic effect.

3. Super lo w noise with as many as 117 channels to bring an un precedented experience.

4. The excellent beam wash and effect light for big event and high level club, bar, etc.

.1. .10.