involight LEDRING800 User Manual

DMX LED Hexo moon 360*10 RGB manual

A. SPECIFICATION:

1. Size:555×555×180mm

2. Weight:6.3kg

3. Power consumption:45W

4. Power input:AC110~240V/60~50HZ

5. LEDs:360PCS(120R,120G,120B)10mm

6. Beam angle:30 degree(20/40 degree optional)

7. Built-in programs,auto running,DMX mode,M/S,sound-active mode,static color

8. Selectable 2,3,4,7,14,26 channels

9. LED display for easier operation

10. Very good effects for the center use

11. Inner box:61*61*23.5cm

12. Master carton:63*63*50cm

13. 2 pcs/ctn

B.OPERATION:

After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto running

mode, DMX mode, Slave mode, sound-activited mode.

“SETUP” is to set the relative specification for current mode.
“UP” is to add the value of current specification.
“DOWN” is to decrease the value of current specification.

Built-in programs-- running one of 22built-in programs

Auto run—running built-in programs one after another in continuous loop.

DMX mode--controlled by DMX controller

Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode

Sound active mode-- running by sound - activated

Static color mode: you can set 255*255*255 static colors.

1. built-in programs mode

Press mode until it shows Prxx, you can select 22 different built-in Programs. press“SETUP”and “UP”
“DOWN” buttons to select the programs (from Pr01 to Pr22) and select the desired program values.

When it shows Pr01, press “SETUP” to choose the seven static color.

When it is Pr02 to Pr22, press “SETUP” and “UP” “DOWN” buttons, you can set the values for

flash(FS00-FS99), fading time(Fd00-Fd99), running speed(SP00-SPFL).

When it is Pr21and Pr22, you can set the background color and chasing color for this effect, switch it from 1-

-r (background color)to 2- -r(chasing color) by “SETUP”, adjust different colors by “UP” “DOWN”.