Page 1
Page 2
DMX LED PAR64 18*4-in -1 Manual
Our DMX LED PAR64 18*4 in 1 advantage is obvious, its operation is much easier, moreover, it can
make very even color mixing, bright, and dynamic light scenery effects. It is widely applied to
entertainment halls, clubs and stages etc.
Specification:
1. Weight: 3.0kgs
2. Size: 31×23×23cm
3. LEDS:18*4-in-1 LEDs(RGBW or RGBA)
4. Each LED is 8W, each chip is 2W
5. Beam angle: 40degree (25degree optional)
6. Wattage: 120W
7. Power input: AC 240V, 50Hz
8. Polished housing, short(black,white optional)
9. Double brackets&color frame available upon request.
10. DMX mode, M/S, auto run, built-in programs, sound active mode
11. LED display for easier operation
12. Thermal protection
13. Ultra brightness and perfect color mixing
14. Unique cooling system
15. Inner box: 37×25.5×25.5cm
16. Master carton: 39×27.5×54cm
17. 2 pcs/ctn
Operation:
1.Built-in Program
A.Press MODE button ,enter built-i n program menu.
B.Press UP or DOWN button ,select the effect program Pr.01~Pr.11.When LED display show Pr.01,press SETUP button enter
edit the static color,press UP or DOWN button ,can select 14 kinds of static colors built-in program (1.-r ；2.-rg；3.-g；4.-gb；
5.-b；6.-rb；7.rgb；8.-w;9.-FL;10.rw;11.gw;12.bw;13.yw;14.uw)，Press SETUP again ,through UP or DOWN button adjust the
brightness ,press SETUP button can setup the flash“FSxx”,through UP or DOWN button ,adjust the speed of the flash
FS00~FS99。
When LED display show Pr.02- Pr.11,the first time press SETUP button ,will be show “SP.XX”.Now through UP or DOWN setup
the running speed SP01~SP100(FL).The second time press SETUP button ,will be show “FSxx”,now can through UP or DOWN
Page 3
button setup the speed of flash FS00~FS99。
2.Auto run mode
Press MODE button ,enter auto run mode menu “AUTO”,The light will be auto run 10kinds of built-in program
Pr.02~Pr.11.The user can setup the built-in program Pr.02~Pr.11 like running speed ,flash speed ,flash speed ,the setting
program will be auto run in order.
3.DMX mode
A.Press MODE button ,enter DMX mode menu “d.×××”
B.Press UP or DOWN button ,setup DMX address d.001—d.512
C.Press SETUP button ,enter setup DMX mode menu X-ch
D.Press UP or DOWN button ,setup DMX mode :4-ch，5-ch，8-ch
E.On mode 8-ch ,Can setup device number ID.xx.On this mode ,use 8 channels there are 66 pieces light will be work on the
same DMX address ,and can control all the light also each light .
F.Press UP or DOWN button ,setup ID value ID.01—ID.66
DMX mode 1：4-ch
CHANNEL VALUE FUNCTION
CH1 0-255 RED
CH2 0-255 GREEN
CH3 0-255
BLUE
CH4 0-255 Cool white
DMX mode 2：5-ch
CHANNEL VALUE FUNCTION
CH1 0-255 MASTER DIMMER
CH2 0-255 RED
CH3 0-255
CH4 0-255
CH5 0-255
GREEN
BLUE
Cool white
DMX mode3：8-ch（8 channes）
CHANNEL VALUE FUNCTION
CH1 0-255 Master dimming
Red color dimming 0-255 Red color dimming 0-255
43 kinds of static
Move each 5 to
change another
color
43 kinds of static color
CH2
color can be chosen
（It is
available when the
7ch is 0-24）
Speed adjustion
（ control the
program speed of
CH6 （ 23-252 ）
selected）
0-255 0—255 slow—fast
Page 4
When CH7 is
between 253-255,it
can ajust the sound
0-255 Adjust sound sensitivity
sensitivity
CH3
CH4
0-255
0-255
Green color dimming 0-255
Blue color dimming 0-255
CH5 0-255 Cool white color dimming 0-255
0-9 NO FUNCTION
CH6
10-255 STROBE （slow—fast）
0-22 in CH2 can choose 43 kinds of static color
23-45 Pro02 （gradual change1）
46-68 Pro03 （gradual change2）
69-91 Pro04 （jumping change1）
92-114 Pro05 （jumping change2）
115-137 Pr06（fantasy change1）
CH7
138-160 Pr07（fantasy change2）
161-183 Pr08（red color gradual change）
184-206 Pr09（green color gradual change）
207-229 Pr10（blue color gradual change）
CH8
230-252 Pr11（ cool white color gradual change）
253-255 Sound active mode
VALUE ID ADDRESS
0-9 ID1-ID66
10-19 ID1
20-29 ID2
30-39 ID3
40-49 ID4
50-59 ID5
60-69 ID6
70-79 ID7
80-89 ID8
90-99 ID9
100-109 ID10
110-119 ID11
120-129 ID12
130-139 ID13
140-149 ID14
150-159 ID15
160-169 ID16
170-179 ID17
180-195 ID18
Page 5
190-199 ID19
200-209 ID20
210 ID21
211 ID22
。
。
。
。
。
。
251 ID62
252 ID63
253 ID64
254 ID65
255 ID66
On mode 3，When CH7 on 0-22, CH2 can choose the static color of buil t-in program, but the function of red color dimming will be
temporary failure；CH3,CH4 will be temporary failure.CH7 on 23-252 ,CH2 adjust the speed of built-in program of the CH7, but the
function of red color dimming will be temporary failure；CH3,CH4 will be temporary failure; When CH7 on 253-255, can open the
function of sound active, the CH2 can adjust the sensitivity of sound active, but the function of red color dimming will be temporary
failure；CH3,CH4,CH5will be temporary failure。The CH7 not as 0,on CH2,CH3,CH4,CH5 the function of red color /blue color
/green color/cool white dimming will be temporary failure .
4.M/s mode
Press MODE button ,enter slave mode “SLAV”
The effect program of the master light on Built-in program ,auto run or sound active mode is the same with the slave light.
5.Sound active mode
A.Press MODE button ,enter sound active mode “SU.××”。
B.Press UP or DOWN button ,setup the value sensitivity of sound active SU.00~SU.31
Notice:
A.If no any touch the button within 20 seconds ,the LED display will be close ,if touch any button at this time ,the LED display will be
recover the orginal status.All the button will be recover the function ,
B.This light have the excess temperature self defencive function .When the brightness is obvious reduce ,please check if the fan work
in normal ,after clear the trouble clear ,please power supply ,the light will be release defend,and work in normal .
Loading...