involight LEDBAR FX103 User Manual

LED 2in1 Blinder Bar

User Manual

Thanks for choosing our goods please read this manual carefully before

your operating and keep this manual for future needs

1

Thank you for purchasing LED 2in1 Blinder Bar, every unit has been thoroughly

tested and has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your fixture for any damage

and be sure all accessories necessary to operate the unit has arrived intact. In

the case damage has been found or parts are missing, please contact the

manufacturer or your dealer for further instructions. You now own a professional

lighting unit that offers endless possibilities.

For your own safety and that of others, please read this instruction manual

carefully before installing the unit.

Anyone involved in installing, operating or servicing the LED 2in1 Blinder

Bar must: • Be a qualified, authorized professional

•Strictly follow the instructions in this user
manual.

Please take the time to read this manual carefully and thoroughly before

installing and operating the luminaire. You should have a good knowledge of its

operating conditions and all pertinent product information.

After you have become familiar with this manual, we recommend that you keep

a copy for future use. All the information found in this manual

2

is subject to change without notice. We reserve the right to modify and upgrade

its range of products, with no obligation to integrate these changes into products

already sold.

Warning

● To prevent or reduce the risk of electrical shock or fire,do not expose the unit

to rain or moisture.

● Do not open the unit within five minutes after switching off.

● Please consider that damages caused by manual modifications to the device

are not subject to warranty.

Installation

The unit should be mounted via its screw holes on the bracket.Always ensure

that the unit is firmly fixed to avoid vibration and slipping while operating.And

make sure that the structure to which you are attaching the unit is secure and is

able to support a weight of 10 times of the unit’s weight. Also always use a

safety cable that can hold 12 times of the weight of the unit when installing the

fixture.

The equipment must be fixed by professionals. And it must be fixed at a place

where is out of the touch of people and has no one pass by or under it.

3

Specifications and Features:

• LEDs: 10pcs 3W CREE LEDs, 60pcs 5050SMD RGB LEDs

• Power Consumption:50W

• DMX Channels: 190 DMX Channels

• Refresh Rate: 500Hz

• Power: 6V 13.3A

• 4 DMX Channels Mode: 9CH,15CH,42CH,190CH

• Control Protocol: Art-net, Kling-net, DMX

• Support RDM

• Front cover color: White and black

• Each LED can pixel control, can create fabulous image effects.

• XLR Connectors: 3pin&5pin XLR Connector

• Powercon in/out, Ethernet in/out

• Work mode: Auto, Sound, DMX, Artnet

• With handle and safe

• Power input:110~240V,50/60Hz

• Power Consumption:50W

• Size: 78x8x11cm

• Net Weight: 3.2KG

4