involight LEDBAR508R User Manual

1

LEDBAR508R

User Manual

Please read this manual carefully before use!

2

Thank you for purchasing this product. To optimize the performance of this
product,prior to use,please read these operating instructions carefully to
familiarise yourself with the basic operation of this unit.Please keep the manual
in safe price for future reference.

This unit has been tested at our factory before being shipped to you, there is
no assembly required.

Once after received this product , please take and put carefully. And check
cautiously that whether the product was damaged or not during the
transportation.

Checking Parts

Please check if the following parts are included:
1 x Laser bar
1 x Power cable
1 x User manual

Danger Laser Radiation!
Avoid direct eye exposure!
Laser radiation can cause eye damage or skin damage
All protective measures for a safe operation of this laser must be applied.

Installation

1. Please check the voltage whether is the same with the one showed on the
equipment or not.

2. This laser light is 3B, it must ask for the technical person and set the light
safety when installation. And let the light beam at the suitable angle.

3. When install this equipment please make sure there's no flammable
surfaces (decorated things, etc) within at least 2.5M and maintain minimum
distance of 0.5M from the equipment to the walls.

4. Please make sure that there's no other equipment or decorating materials
obstructed the exhaust fan and the vent-pipe.

5. Products should be install immobility.

6. In case of safety, it's very important that to connect the earth with line.

3

Attention

1.Please do not open the bottom cover yourself without permission.Operate it
accord the user manual. Call the technician when the machine breaks down.

2.Please do not see the laser beam directly to avoid any damage.

3.Before connect or disconnect the power, please adjust the luminance of the
laser diode to the least to avoid any damage to the laser diode.

4.This unit should be keep dry, do not use in the rain and dusty environment. It
can be use in the outdoor with the water-proof cover protector.

5. Set the light immobility and try to avoid strong shake or hit.

6.Prevent dust into the equipment to avoid problems.

7.Please keep that there's no other equipment or decorating materials
obstructed the exhaust fan and the vent-pipe when the equipment was
working.

8.Before connect power, check the plug is immobility or not, power line should
be connect well.

9.Please do not open or close the equipment frequently that's to avoid any
affect to the life span of the laser diode, and try the best to avoid the long time
working.

10.Due to the characteristic of the laser diode, after four hours working, it
should be close at least 25 minutes until the laser diode cooling then work
again.

11.Don't touch the light or draw the power line when your hand was wet. And
do not pull the electronic power line.

12.Maintain the distance at least 3M above from the equipment to the object.

13.This equipment does not have any parts can repair for the users, please do
not open the equipment.

14.When the laser diode became dim or damaged please contact the dealer
timely.

15.When you want to re-transfer the products,you'd better use the original
package to shockproof.

Display Function Instruction

No.

Menu
Up/Down

Default

Function
1

Addr

1-512

1

Set address/Control mode/Slave
mode

2
Chnd

22CH

22CH

7CH

7CH

3

Slnd
HoSt

Master

SLAV

Slave

4

LoSt
AUTO

Auto

BLAC

Black-out