GPS NAVIGATION SYSTEM
GPS-3V1
INSTRUCTION MANUAL
InVion
Model: GPS-3V106-IUS
Language : US
Page : 1 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Congratulations on choosing your new Invion product. We have
every expectation that you will be completely satised with your new
purchase.
To always guarantee optimal function and performance of your product, we
would ask the following:
Before using the product for the rst time, carefully read the operating
•
instructions and adhere to the safety precautions!
All activities at and with this product may only be carried out as described
•
in these operating instructions.
Please be sure to include the operating instructions in case you pass
•
along this product to someone else.
Packaging:
This product is delivered in protective packaging to prevent transportation
damage. Packaging materials are raw materials and can therefore be
recycled. Please recycle these materials.
InVion
Model: GPS-3V106-IUS
2
Language : US
Page : 2 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Content
I. Brief introduction of Hardware ..................................................5
II. Navigation Manual .....................................................................7
1. Introduction ......................................................................................7
Features .............................................................................................7
Guided Tour
Technical Support
2. Getting Started .................................................................................8
End User License Agreement
Driver Warning
Initial Conguration Wizard ................................................................8
Menus ................................................................................................9
Main Map
GPS Not Found
Map Views
Point on the Map
Screen Buttons
Cycling Through Screens
3. Search for a Location ....................................................................17
Enter Address
Recent Locations
My Favorites
POI (Points of Interest)
Route Manager
Map Manager
Extras ...............................................................................................36
4. Settings ...........................................................................................39
Prompts ...........................................................................................39
Time Zone Settings
Language Settings
GPS Settings
Demo Button
.......................................................................................7
..............................................................................7
............................................................8
...................................................................................8
.........................................................................................14
...............................................................................15
.......................................................................................15
..............................................................................16
................................................................................16
.................................................................17
..................................................................................17
.............................................................................22
....................................................................................23
....................................................................26
................................................................................29
...................................................................................34
..........................................................................40
...........................................................................40
...................................................................................40
....................................................................................41
InVion
Model: GPS-3V106-IUS
3
Language : US
Page : 3 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
5. Installation ......................................................................................42
PC Requirements
Installing the Console
Console Toolbar
Map Screen Interface
Installing a Map
Load Map
Remove Map
Import Favorite Location
Export Favorite Location
III. MP3/Movie Player ...............................................................................48
IV. Specications ....................................................................................50
V. Legal .....................................................................................................51
1. Notices, Disclaimers, and Terms of Use .....................................51
2. Copyright Notice ............................................................................52
3. Safety advice ..................................................................................53
4. Caution ...........................................................................................54
5. FCC compliance .............................................................................55
VI. Claims & Warranties ..........................................................................56
.........................................................................................44
............................................................................42
......................................................................42
...............................................................................42
......................................................................43
................................................................................44
...................................................................................44
..................................................................44
..................................................................46
InVion
Model: GPS-3V106-IUS
4
Language : US
Page : 4 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
I. Brief introduction of Hardware
Standard Package
Before getting started with your GPS, check to see that your Invion
package includes the following items. If you are missing any parts, please
contact your Invion dealer immediately.
● GPS Unit ● SD Card
● Owner’s Manual ● Card Reader (optional)
● DVD-ROM (optional) ● Accessories (see
Specications, page 50)
1211
10
9
8
POWER
1.
Press and hold to turn the unit
On and Off.
MP3
2.
Press to switch to MP3 mode.
MENU
3.
In Navigation mode, press to
display the Destination menu.
MAP
4.
Press the MAP button to return
to the Navigation mode when
in any other mode. When in
the Navigation mode, press the
MAP button to display the Map
Screen.
1
2
3
4
5
6
7
+/-
5.
Use to zoom in on or zoom out
of the map.
SPEAKER
6.
DC IN
7.
SD CARD SLOT *
8.
RESET
9.
CHARGE INDICATOR
10.
BULIT-IN GPS ANTENNA
11.
TOUCH SCREEN
12.
TOUCH PEN
13.
ADJUSTMENT BUTTON
14.
Press to display the setup menu,
which can be used to adjust the
brightness, volume, and FM
frequency.
HEADPHONE JACK
15.
13
14
15
InVion
Model: GPS-3V106-IUS
5
Language : US
Page : 5 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
ABOUT THE TOUCH SCREEN
•
Do not touch the TOUCH SCREEN until the unit starts up completely.
Otherwise, the touch screen may not function correctly.
The navigation device is mainly operated by touching the buttons on the
•
touch screen.
If nothing happens when you touch the buttons on the touch screen,
•
remove your hand or the touch pen from the screen and touch the button
again.
•
Do not touch any buttons that are grayed out.
When cleaning the touch screen, use a soft cloth.
•
* SD CARD SLOT: Insert a SD/MMC card containing the navigation software,
or songs to load them on the GPS device.
For loading MP3 and Movies to the SD card, we recommend using a
•
separate SD card reader / writer.
CONNECTION
Connect to Car Power
Connect the mini plug of the car adapter into the DC IN jack on the side
•
of the device.
Connect the other plug of the car adapter into the car cigarette socket.
•
SIRF III Chipset
operates behind athermic windshield
InVion
Model: GPS-3V106-IUS
6
Language : US
Page : 6 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
II. Navigation manual
1. Introduction
Welcome to the world of mobile navigation! With Invion, you can steer into
a new era of mobile navigation. Simple operation, clear maps in
mode as well as numerous innovative features and functions have made
Invion the essential guide for every traveler – whether in the car, on foot or
by bike.
2D or 3D
Features
Invion provides the following features for easy navigation:
Route calculation within seconds
•
High quality 2D/3D maps with display of street names
•
QuickNav button for travel to a predetermined address
•
Address input via a full-size keyboard optimized for nger input
•
Storing of any location one click away
•
Cross border navigation without switching maps
•
Address retrieval from History, Favorites, or Points of Interest (POI)
•
Planning and optimizing of multi-stop trips
•
Car navigation with fastest or shortest route
•
Pedestrian navigation in parks and town centers
•
Fast installation, no activation
•
Short tutorial for an easy start
•
Day and night views and turn-by-turn information
•
Guided Tour
When you rst start the navigation system, a message box appears
prompting you to open the Guided Tour program. The Guided Tour is an
excellent way of becoming familiar with the different navigation features
available. You can also start the Guided Tour any time, by tapping the
Tutorial button from the Extras menu.
Technical Support
If you have other questions about the software, please contact your
supplier.
7
InVion
Model: GPS-3V106-IUS
Language : US
Page : 7 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
2. Getting Started
End User License Agreement
When you start the device for the rst time, the End User License Agreement
screen appears. Please review the license information and tap the Agree
button. The End User License Agreement screen appears for each map
change where the user has not agreed to the license information.
Driver Warning
When you start, the Driver Warning Message screen appears.
Figure 1- Driver Warning Agreement
Please take a moment to review the information provided before tapping the
Agree button. Select the “Do not display this warning again” checkbox to
skip this message when starting.
Initial Conguration Wizard
This wizard lets you easily congure the system settings before using the
device by providing a step-by-step setup process to select an option for:
Language Settings – Lets you set text and voice language preferences.
•
GPS Settings – Lets you set GPS congurations.
•
Units of Measure – Lets you specify the system measurement units.
•
Prompts – Lets you specify the general navigation prompts that you want
•
to appear and how direction notications are displayed (for example, Text
or Symbol).
QuickNav Settings – Lets you specify an address or point of interest that
•
the device navigates to when you tap the QuickNav button on the Main
Map screen.
Tap the Next button to move from screen to screen. Tap the Done button
•
on the QuickNav screen to save your conguration choices and exit the
wizard. The top menu appears.
InVion
Model: GPS-3V106-IUS
8
Language : US
Page : 8 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Menus
Destinations - Provides the central navigation features, such as Addresses,
Recent Locations, My Favorites, and POI (Points of Interest).
Options – Provides 2D/3D and Day/Night map view options, and the
following submenus:
Route Manager – Displays features relating to route information,
•
avoiding roads, and setting up the QuckNav route.
Map Manager – Displays features relating to selecting maps and
•
specifying map settings.
Extras – Displays add-on features.
•
Settings – Provides setting options to congure the navigation system.
You can press the Menu
button from the Main Map screen to display
the top menu, as shown below.
Top Menu
The Address button lets you navigate to an address, as described in Enter Address
(see “Enter Address” on page 17).
The Recent Locations button lets you navigate to a previously visited destination,
as described in Recent Locations (on page 22).
The My Favorites button lets you navigate to a favorite location, as described in My
Favorites (on page 23).
Figure 2 - Destinations Menu
The Points of Interest button lets you navigate to thousands of interesting places.
For more information, see POI (Points of Interest) (on page 26).
The Cancel Route button stops the current navigation.
InVion
Model: GPS-3V106-IUS
9
Language : US
Page : 9 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
The Map button lets you return to the Main Map screen.
The Next button lets you move between the Destinations and
Options menus.
Options Menu
The Day/Night Mode toggle button lets you display
the map view for either day or night driving. For a display
of day and night maps, see Map Views (on page 15).
The 2D/3D Mode toggle button lets you display the map
view in 2-dimensional or 3-dimensional views for either
day or night driving. For a display of 2D and 3D maps,
see Map Views (on page 15).
The Route Manager button displays a menu that lets you select from the following
route buttons: Show Route, Turn-by-Turn, Route Playback, Avoid Road, and
QuickNav. For more information, see Route Manager (on page 29).
Map Manager button displays a menu that lets you select from the following
The
map buttons: Select Map, Pedestrian Mode, Free Map Browsing, Units of Measure,
and Map Settings. For more information, see Map Manager (on page 34).
The Extras button displays a menu that lets you select additional features. For more
information, see Extras (on page 36).
InVion
Model: GPS-3V106-IUS
Figure 3 - Options Menu
10
Language : US
Page : 10 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Route Manager Menu
The Turn-by-Turn button lets you display the complete, step-by-step directions to
your destination. For more information, see Turn-by-Turn List (on page 29).
The Route Summary button lets you display your complete route on the Map
screen. This button is disabled when no route exists.
The
Route Playback button lets you record your route and play it back later. For
more information, see
The Avoid Roads button lets you avoid a road type, such as toll roads or selected
streets, as described in Avoid Roads (on page 30).
The QuickNav Settings button lets you specify an address or place to which you
can navigate with a single tap on the QuickNav button. For more information, see
QuickNav (see “Quick Navigation” on page 33).
Route Playback (on page 32).
Figure 4 – Route Manager Menu
InVion
Model: GPS-3V106-IUS
11
Language : US
Page : 11 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Map Manager Menu
The Select Map button lets you choose among different maps on your memory
card. For more information, see Select Map (on page 34).
The Units of Measure button lets you specify the system measurement units. For
more information, see Units of Measure (on page 35).
The Map Settings button lets you specify map orientation, font, and zoom features.
For more information, see Map Settings (on page 35).
Figure 5 – Map Manager Menu
The Pedestrian Mode/Driving Mode button lets you toggle between traveling as a
pedestrian or in a vehicle. When in Pedestrian Mode, you are not limited by vehicle
constraints, such as one way streets. Note that you can only generate a route up to
ten miles and Voice prompts are not available.
The Free Map Browsing button lets you browse the map unconnected to the current
location. In this mode, the GPS system is not used. Your current position is not
detected and the navigation system does not keep track of your driving progress.
Extras
The Multi-Stop Planner button lets you designate several stops on a route, as
described in Multistop Planner (on page 36).
The Tutorial button opens the Guided Tour program. The Guided Tour is an excellent
way of becoming familiar with the different navigation features available.
InVion
Model: GPS-3V106-IUS
Figure 6 - Extras Menu
12
Language : US
Page : 12 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Settings Menu
Settings button, at the bottom of the Options menu, lets you
The
congure your settings options.
The Prompts button lets you specify the types of voice or visual prompts that you
want to use. For more information, see Prompts (on page 39).
The Language button lets you select the language for announcing travel prompts,
street names, and driving directions. For more information, see Language Settings
(on page 40).
Figure 7 - Settings Menu
The GPS Signal button lets you congure the GPS settings. For more information,
see GPS Settings (on page 40).
The Help button opens a text le providing technical support information.
The Start Demo button lets the device display a simulated route. Many of the
navigation features are disabled when the Demo is running. You can end the Demo
by tapping the Stop Demo button.
The About button opens an information box, displaying the software version and
copyright information.
InVion
Model: GPS-3V106-IUS
13
Language : US
Page : 13 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Main Map
You can use the icons displayed on this screen to plan and view your
route.
Directions Bar
Current Location
Zoom Out
Compass
Quick Nav
Volume GPS Status
Figure 8 - Map Screen
Current location in Vehicle Mode.
Current location in Pedestrian Mode.
Last known location when GPS signal is unreliable.
Generated route
Travel direction
The red GPS receiver means that a reliable GPS signal is not yet located.
The green GPS receiver means that a reliable GPS signal is located and
that you are ready to navigate.
These icons display your power source, electricity or battery. The battery
appears as green, yellow, or red depending on whether the battery is
recharged or weak.
GPS bar is a toggle button that displays the remaining travel distance and
The
travel time, estimated time of arrival, street name and address number, and speed
and altitude.
When you have calculated a route, the
your next turn. Click this bar for a complete list of turn-by-turn directions.
Directions bar displays information about
GPS-Gener ated
Information
Zoom In
Power Indicator
Menu Button
InVion
Model: GPS-3V106-IUS
14
Language : US
Page : 14 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
GPS Not Found
When you rst start navigating you will hear the message “Signal too low”.
This message means that your navigation device hasn’t yet located a
reliable GPS signal. Check that your device is connected to the cigarette
lighter and has a clear view of the sky.
The “GPS not found” message means that there is not GPS antenna or
the antenna is not properly installed. For more information about GPS, see
GPS Settings (on page 40).
Please check that:
The GPS antenna is extended or ipped up.
•
The GPS antenna has a clear view of the sky for uninterrupted GPS
•
reception. The navigation system cannot calculate the route if there is no
GPS reception (for example, in a tunnel).
The navigation device is charged or connected to the cigarette lighter.
•
Map Views
From the Options menu, you can determine whether you want to see a twodimensional or three-dimensional map in daylight or nighttime conditions.
InVion
Model: GPS-3V106-IUS
15
Language : US
Page : 15 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Point on the Map
You can navigate to any point by tapping its location directly on the Main
Map screen in both 2D and 3D map view. This feature is especially helpful
when you want to navigate to a specic point on the map, but you don’t have
the street address. When you tap on the map, the context menu appears
with the following options:
Figure 13 - Point on the Map Options
Go There – This button lets you calculate a route from the map point.
Add to My Favorites – This button lets you save a point on the map as
a favorite destination. This is helpful if you see a location that you want to
return you later.
Set as Origin –This button lets you designate the selected point as the
starting point and not the destination, which lets you calculate a route from
a point other than your current location.
Screen Buttons
The following buttons appear on many of the navigation screens.
When you tap the Next button for a selected address, group, or place,
the software automatically opens the next screen in the sequence.
When you tap the Back button, the software returns you to the previous
screen.
When you tap the Go button, the software calculates the route to your
selected destination.
The Actions button provides a list of command options available for
the selected address or place.
The Save, OK, or Done buttons conrm your value preferences and
returns you to the menu or map.
InVion
Model: GPS-3V106-IUS
16
Language : US
Page : 16 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Cycling Through Screens
Every navigation function, such as Address, POI, or My Favorites consists
of a sequence of screens. You can cycle through the screen sequences by
either:
Selecting an item from the list and tapping it.
•
Selecting an item from the list and tapping the Next button.
•
The sequence ends with the Show on Map screen, where the destination is
displayed and the Go button is available for you to calculate a route.
Note: You must rst select an item for Actions, Next and Back buttons
to be enabled.
3. Search for a Location
Enter Address
When you tap the Address button, the Address screen appears as shown
below.
Note: For United States maps, an additional States address screen
appears.
InVion
Model: GPS-3V106-IUS
Figure 14 - Display the Address Screen
17
Language : US
Page : 17 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
You can use the keyboard to enter the characters of the address name.
The characters appear in the
Address eld. The software automatically
searches the Address list for the rst occurrence of the entered characters.
After you have selected a city, the software displays the next address eld,
such as street and address number.
You can also tap the Next button to move through the sequence of address
screens.
The following command keys are available to enhance your search
process:
If the automatic search feature does not nd the specied search entry,
use the Find button to conduct a sub-search, particularly useful when the
address name consists of two or more words.
The Scroll buttons let you move up or down the list of address items,
such as town or street names.
The Hide/Display Keyboard toggle button lets you extend or shorten
the address list by hiding or displaying the keyboard.
Note: When the number of address search results t on a single screen,
the keyboard is automatically hidden, displaying the address list only.
If the search results do not display the desired address, display the
keyboard and enter additional search characters.
The Select key lets you display lowercase, numeric, and special
characters This button also displays different alphabet characters (for
example, Greek). The operating system installed on the device must be
able to support these characters.
The Erase key lets you delete the last character in an address eld.
You can change your address search method by tapping the Mode button
to select from a variety of address formats, as described in Address Modes
(see “Address Modes” on page 19).
18
InVion
Language : US
Page : 18 (of 51 Pages)
Model: GPS-3V106-IUS
Version : 2.3
Date : 2007.01.10
Note: If the entered characters are not found at the beginning of the name
in the Address list, the Smart Search System automatically searches
for the entered characters throughout the entire list, for example, in the
middle or the end of the name.
The software lets you search for city and street names without having
special characters, such as umlauts or accent marks, which are used in
many European languages.
Address Modes
You can dene the information used to locate an address by tapping the
Mode
button. The software provides a variety of options for
entering an address.
City-Street This sequence provides the following address screens:
Street-City This sequence provides the following address screens:
Cross Streets This sequence provides the following address screens:
Zip Code This sequence provides the following address screens:
City, Street, Address Number
For every city, you also have the option of selecting the
City Center.
If you don’t know address number, you can select the
Street Midpoint.
City-Street is the default format.
City, Street, Address Number
This mode lets you enter a street name without having to rst
designate a town. It is useful when you’re looking for an address in
a metropolitan area where there are many cities and towns.
City, Street 1, Street 2
You can locate a road junction by entering the names of two
intersecting streets.
Zip Code, Street, Address Number
You can locate a street address by entering the post code, without
entering a town name. It is useful when you have no information
about the town.
InVion
Model: GPS-3V106-IUS
19
Language : US
Page : 19 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
In Other Maps You can select another map of a country that you can travel to by
vehicle.
This feature is available only when you have the following maps
installed:
Map of the country where you are currently located.
•
Map of the country where you want to travel.
•
The map of the major roads for that continent that connect
•
one map to another (for example, the major roads of USA)
For example, if you are in Boston and you want to travel to Montreal,
select the map of Canada and designate Montreal St. Catherine
Street as your destination. The navigation device automatically
displays the map of the US when traveling on local roads of that
country, a map of Major Roads of the US when traveling on a US
highway, and the map of Canada when traveling on local roads of
that country.
Address Actions
When you have specied an address, tap the Actions button to select from
the following Address commands:
Set as Origin
Lets you designate the selected location as the route origin. You would use
this command when calculating a route from a point other than your current
location.
Show on Map
Lets you see the selected address on the map.
Add to My Favorites
Lets you add an address to your list of favorite locations, as shown in the
gure below. For more information, see My Favorites on page 23.
InVion
Model: GPS-3V106-IUS
20
Language : US
Page : 20 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Figure 15 - Add Address to My Favorites
Go to your Destination
After you have specied the address, tap the Next button. The navigation
system shows your destination on the Show on Map screen before
calculating a route. Check that the destination address is correct at the top
of the screen. If you want to change the destination, tap the Back button
and change your address entries.
Figure 16 - Calculate your Destination
This option selects the route that takes the least amount of time.
Quick is the default value.
This option selects the route that is the shorter distance. Remember,
the shorter route may not always be the quickest, as you are able to
travel faster on some roads than on others.
InVion
Model: GPS-3V106-IUS
21
Language : US
Page : 21 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
When you have specied the address, you can instruct the navigation
system how to calculate your route by tapping either the Quick or Short
button.
When you are ready, tap the
button to create a route to your
selected destination.
Note: Route generation excludes any detours, stops or delays along the
route.
Recent Locations
The Recent Locations screen lets you select an existing destination
from a list of destinations that you have previously traveled to. this
software automatically stores the last 64 destinations in memory. As
each new route is added to the top of the list, the older destinations
at the bottom are erased.
To navigate to a recent destination, tap the Recent Locations button.
From the Recent Locations screen, select a location and tap the
Show or Next button. A map appears showing the specied location.
Go button to calculate the route.
Tap the
Figure 17 - Calculate your Destination
From this screen, you can tap the Actions button to select from the following
command options.
Set as Origin Lets you designate the selected location as the route origin. You
Delete Item Lets you delete a recent location.
Clear List Lets you clear all locations in the Recent Locations screen.
Information This button displays the location’s address information.
would use this command when calculating a route from a point
other than your current location.
InVion
Model: GPS-3V106-IUS
22
Language : US
Page : 22 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
My Favorites
A Favorite is a destination that you have stored for easy retrieval.
To access a favorite destination, open the
tap the
My Favorites button. The My Favorites screen displays your
favorites groups. When you tap on a selected group, the navigation
system automatically displays its stored locations. Tap the selected
location to show your destination on a map. Tap the GO button to
calculate your route.
Figure 18 - Travel to a Favorite Location
Note: The My Favorites folder is the default folder where all favorites are
stored if not assigned to a group.
The Show Map screen also lets you set your route type, Faster or Shorter. For
more information, see Go to your Destination (on page 21).
Favorite Groups
You can tap the Actions button from the My Favorites screen to add, edit, or
delete groups, as described below.
Destinations menu and
Add Group
When you tap this button, the
Enter the group name and select an icon to identify the group, as
shown below.
The icon identies all destinations located in that group, as
displayed on the map.
InVion
Model: GPS-3V106-IUS
Favorites Group screen appears.
Figure 19 - Create Favorites Group
23
Language : US
Page : 23 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Edit Group When you tap this button, the Favorites Group screen appears
Delete Group
with the name and selected image of the highlighted group. You
can change the name and icon.
When you tap this button, the selected group and its associated
entries are removed. The
My Favorites group cannot be deleted.
Favorite Alerts
Alerts let you know that you are within a certain distance of a favorite
location.
You can tap the Alerts button to set the distances for the 1st and 2nd Alerts.
When you travel closer than the designated distance, the alert will sound,
as shown below.
Figure 20 - Setting Your Favorite Alerts
Notes:
Favorite Alert settings affect all Favorites Groups.
The 2nd Alert must be set to go off at closer distance than the 1st Alert.
Alerts can be set for a group but not for individual locations. Of course,
you can always create a group that has just one location.
You can disable the alerts for all groups by selecting the 1st Alert setting to
Off.
You can disable the alerts for a particular group by clearing the checkbox
next to the selected group. Activate that disabled alert by selecting the
checkbox next to the group.
24
InVion
Language : US
Page : 24 (of 51 Pages)
Model: GPS-3V106-IUS
Version : 2.3
Date : 2007.01.10
Figure 21 - Disabled Favorite Alerts
Add Favorite Locations
MY FAVORITES or any selected group that you have created to display
Tap
its locations. You can save a location to your favorites groups from the
Address, Recent Locations, or POI screens. For more information, see
Add to My Favorites (on page 16).
Favorites Actions
From this screen, you can tap the Actions button to display the following
commands.
Set as Origin Lets you designate the selected location as the route origin. You
Show Map Lets you see the selected address on the map.
Edit Favorite
Location
Delete
Favorite
Location
Information This button displays additional address information, such as
would use this command when calculating a route from a point
other than your current location.
Lets you change the name, comment, or group location for the
selected location.
Tap the button to remove the selected location.
address details, phone number, and other comments about the
favorite location that you have entered.
InVion
Model: GPS-3V106-IUS
25
Language : US
Page : 25 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
POI (Points of Interest)
The POI list is a collection of hundreds of interesting or useful places
organized by easy-to-nd categories. For example, you can use the
software to guide you to a shopping center, hotel, restaurant, or gas
station.
From the top menu, tap the Points of Interest button. The POI screen
appears. You can nd a category by tapping the Hide/Display Keyboard
button and entering text in the POI Category eld. The Smart Search
System automatically displays the POI categories that match the characters
entered.
If you didn’t nd the category through the initial search you can also use
Find button to do a sub-search, particularly useful when the
the
category name consists of two or more words. You can always browse the
POI Category list by using the
When selecting a category, the software automatically displays the category
entries and the distance each entry is from your current position. Select your
entry and tap or click the
on the map and then tap the Go button to calculate your route. From the
Show on Map screen, you can designate a route type, Quick or Short. For
more information about calculating a route, see
(on page 21).
Browse buttons.
Next button to display your selected destination
Go to your Destination
Notes: From the Item Entries Actions screen, click the Sort by ABC
button to display the category entries in alphabetical order.
InVion
Model: GPS-3V106-IUS
Figure 22 – Points of Interest
26
Language : US
Page : 26 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Subcategories
Many categories have subcategories to provide for an even greater list of
choices. For example, Gas Station, may have many subcategories each
representing a particular brand name. The same is also true for hotels.
Restaurants have subcategories that represent different types of food, such
as Indian, Italian, and French.
Figure 23 - POI Subcategories
Search Near a Location
You can tap the Near button to determine the location area, where you want
to search for a specic place, such as a gas station, hotel, or restaurant.
The available options are listed below.
Current
Location
Destination Lets you search near a specied destination. For example, you
Other Address Lets you search near another address. For example, you have
Search Radius Enter the location distance to search for a designated place. For
Lets you search near your current location. This is the default
value.
know your general destination, but not very much about interesting
locations in the area. You can use this feature to locate the tourist
attractions close to your destination. Note that this button is
enabled only when a destination is entered.
set a destination, but on the way you want to stop at another
location. You can use this feature to search near that location for
restaurants, lodging, historical sites, or other locations.
example, if you enter 5 ml, this feature
mile radius.
When you select a large search radius, you risk the chance of
nding too many locations, which makes it harder to nd the place
that you are searching for. It is best to start with a small search
radius size, and then increase the radius size if necessary.
Note: if you don’t specify a search radius, the software searches
the whole map and displays the locations according to the distance
from you.
only searches within a ve
InVion
Model: GPS-3V106-IUS
27
Language : US
Page : 27 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Show or Hide Symbol on Map
You can select or clear the checkmarks next to a POI entry to show or hide
the POI symbol on the Main Map screen.
POI Actions
When you have selected a POI location, tap the
Actions button to display
the commands listed below.
Set as Origin Lets you designate the selected location as the route origin. You
Show on Map Lets you see the selected address on the map.
Add to My
Favorites
Delete
Favorite
Location
Sort By ABC
or Distance
Information
would use this command when calculating a route from a point
other than your current location.
Lets you change the name, comment, or group location for the
selected location.
Lets you add an address to your list of favorite locations, as shown
in the gure below. For more information, see My Favorites on
page 23 .
Lets you sort the entries of the selected category alphabetically or
by distance from your current location.
Note: the software initially displays the entries by distance.
This button displays the location’s address information.
InVion
Model: GPS-3V106-IUS
28
Language : US
Page : 28 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Route Manager
From the Options menu, tap the Route Manager button to display the route
navigation features, as described in the sections below.
Turn-by-Turn List
When you display the Turn-by-Turn screen by tapping the Directions bar
on the Main Map screen, the Turn-by-Turn list changes as you navigate
the route.
After you have entered a destination and calculated a route, the Directions
bar appears on the Main Map screen, displaying the following information:
The next turn direction
•
The distance to the next turn
•
The street name of the next turn
•
When you tap the Directions bar, the navigation device displays a complete
set of turn-by-turn directions from your current point to your selected
destination. You can also tap the
button to display the direction list.
Use the Scroll buttons to move up or down the directions list.
Figure 24 - Turn-by-Turn Display
The following options are available:
The Route Summary button displays your entire route on the Main
Map screen, plus the travel distance and the Estimated Travel Time
Remaining (ETR).
The Show Turn button displays the next turn on the Main Map screen,
including the street name, the distance to it, and the turn direction.
The Avoid button lets you avoid the selected turn in the directions list.
The software recalculates the route automatically. Note that when you
exclude a turn, the recalculated route may take longer.
29
InVion
Model: GPS-3V106-IUS
Language : US
Page : 29 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Route Summary or Cancel Route
The Route Summary button lets you display an overview of your
complete route on the Map Manager screen, the total driving distance
to your destination, the estimated travel time, and the complete
destination address.
The Cancel Route button, in the Destinations menu, stops the current
navigation and clears the route. This feature is active only after a
destination has been set.
Avoid Roads
You can specify that certain roads be permanently excluded from your route
calculations. Use this feature when you want to avoid congested roads, toll
roads, or unsafe streets.
From the Route Manager menu, tap the Avoid Roads button. The Avoid
Roads screen appears, displaying the Toll Roads, Ferries, and My Roads
to Avoid.
Figure 25 – Avoid Roads
You can avoid or allow the road categories by tapping the or
button to include or exclude all items located in the group.
Ferries and Toll Roads are avoided or allowed as an entire group. You
cannot allow or avoid specic toll roads or ferry routes.
My Roads to Avoid is a default folder that lets you store roads to avoid. You
can display the items in this folder and allow or avoid specic roads.
30
InVion
Language : US
Page : 30 (of 51 Pages)
Model: GPS-3V106-IUS
Version : 2.3
Date : 2007.01.10
Avoid Road Groups
From the Avoid Roads screen, tap the Actions button. The Actions screen
lets you add a group as shown below.
Figure 26 – Creating Avoid Road Groups
When you tap the Actions button, you can select from the following
commands:
Add Group Create a new a group of roads to avoid. For example, you can
Edit Group Select a group and tap this button to change the group name.
Delete Group Select a group and tap this button to remove the group from the
create a group called “Country Roads” where you designate the
roads in that area to be avoided.
When you tap the
screen appears. Enter the group name and tap
When you tap the Edit Group button, the Avoid Roads Group
screen appears displaying the group name. Change the group
name and tap
Roads screen.
Avoid Roads screen. The road entries in this group are also
removed.
Add Group button, the Avoid Roads Group
Save.
Save. The new name is displayed on the Avoid
InVion
Model: GPS-3V106-IUS
31
Language : US
Page : 31 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Avoid Road Locations
When you tap Default or an Avoid Roads group, the navigation device
displays the group screen, which lets you select roads to avoid. From this
screen, you can use the Allow or Avoid buttons to include or exclude a
selected road when calculating a route.
Figure 27 - Adding a Road to Avoid
Notes: You cannot specify a particular toll road.
You can tap the Actions button from this screen to select from the following
commands:
Add Road Lets you select a road. An address screen appears for you to
Edit Road Lets you rename the road and select a different group. When you
Delete Road Select a road and tap this button to remove the road from your
Show on Map Lets you show the map with the displayed destination for you to
Information This button displays the location’s address information.
specify a town and street. When you have completed updating
your road information, tap Save.
have made your changes, tap Save.
group. The system no longer avoids the removed road.
review before creating a route.
Route Playback
This feature lets you record your route as you’re driving and then to
play it back on the Main Map screen.
To record a route, tap the Record button in the Route Playback screen.
The navigation device shows the
the selected destination. To stop recording, return to the
screen and tap the
Stop button.
Main Map screen and navigates you to
Route Playback
32
InVion
Language : US
Page : 32 (of 51 Pages)
Model: GPS-3V106-IUS
Version : 2.3
Date : 2007.01.10
To playback your recording, select the data le, and tap the Play button.
The navigation device plays the recorded route on the Main Map screen. To
stop the playback, return to the
Route Playback screen and tap the Stop
button.
Route Playback Actions
You can tap the Actions button to display the following commands:
Delete
Recording
Clear All
Recordings
Playback
Speed
This button lets you remove a selected recording.
This button removes all recordings.
Use the arrow keys to adjust the playback speed. The range is
from 100% to 300%.
Quick Navigation
You can dene the QuickNav location by selecting either the To Predened
Address or To Nearest POI Category in the QuickNav Settings screen.
When the location is selected, you can navigate to your address by tapping
QuickNav button displayed on the Main Map screen.
the
For example, if you have selected “Gas Stations” as the QuickNav
destination, when you click the QuickNav button from the Main Map screen,
a route is automatically created to the closest gas station.
Figure 28 - Setting the QuickNav Location
InVion
Model: GPS-3V106-IUS
33
Language : US
Page : 33 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Map Manager
From the Options menu, tap the Map Manager button to display the map’s
navigation features, as described in the sections below.
Select Map
This feature lets you change the currently selected map to another map
saved on your SD memory card.
You can tap the Select Map button to display the maps saved on your
SD memory card. The Select Map screen displays map details and version
numbers. The map currently used appears at the top of the list.
Figure 29 - Select a Map
You can choose from the following Select Map commands:
Refresh Lets you refresh the screen when a new memory card is inserted
into the device.
Delete Lets you permanently remove a selected map.
Note: You cannot delete the current map.
Select Lets you designate a selected map as the current map.
InVion
Model: GPS-3V106-IUS
34
Language : US
Page : 34 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Pedestrian Mode
The Pedestrian Mode button lets you toggle between traveling as a
pedestrian or in a vehicle. When in Pedestrian Mode, you can generate
a route up to ten miles and you are not limited by vehicle constraints,
such as one way streets. When creating a pedestrian route, the
software avoids motorways or other roads where pedestrians would
not travel. Voice prompts are deactivated in this mode.
Free Map Browsing
This feature lets you browse the map without the GPS receiver
returning you to your current location. Tap the Free Map Browsing
button to disconnect from the GPS receiver.
When you are ready to reconnect to the GPS receiver, go to the
Settings menu and tap the button.
From the
Units of Measure
You can tap the Units of Measure button to specify the measurement
system you would want to use.
You can select:
Miles/Yards
•
Miles, 10th of a Mile
•
Kilometers/Meters
•
Map Settings
GPS signal screen, tap the button.
You can tap the Map Settings button to customize your map display.
InVion
Model: GPS-3V106-IUS
35
Language : US
Page : 35 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
The following map settings are:
Map
Orientation
Use Automatic
Zoom
Use Larger
Print
Day/Night
Mode Auto
Switch
Forward is up – This option orients the map so that your forward
direction is always at the top.
North is up – This option orients the map so that North is always
at the top.
When this option is selected, the zoom is speed dependent. The
map zooms out at higher speeds, displaying a larger map area,
and zooms in at slower speeds, displaying a smaller map area. If
you manually change the zoom, the Automatic Zoom returns to a
system dened zoom level after several seconds of inactivity.
This option increases the size of street names to make the map
easier to read.
When this option is selected, the display automatically switches
between day and night view according to the GPS time and date
information provided. If this option is selected, but you manually
switch the day /night view, it will remain in that mode until the next
time the display automatically switches the day /night view.
Extras
From the Options menu, tap the Extras button, to display the add-ons as
described in the sections below.
Multistop Planner
The Multistop Planner lets you plan a route with up to twelve stops.
When you tap the Go button, the route is calculated in stages, from
the departure point to the rst stop. When you reach the rst stop, the
route recalculates to the second stop, and so on.
InVion
Model: GPS-3V106-IUS
Figure 30- Travel to Multiple Routes
36
Language : US
Page : 36 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
The Show on Map screen provides you with the following route types: Faster
and Shorter. You can select Shorter (the default value) to calculate a route
with the shorter physical distance between your current location and the
selected designation. When you tap the GO button, the navigation system
automatically calculates the faster route.
Dening Route Groups
A Route Group represents a group of stops.
From the Multistop Planner screen, select the Actions button and tap Add
Group. From the Add Group screen, enter the Group name and tap Save.
The Actions screen also lets you edit or delete a selected group.
Figure 31 - Dening the Route Group
Setting Stops Along the Route
You can set up stops by selecting the Route Group and tapping the Next
button. From the Stops screen, tap the Actions button to add, rename, or
delete a destination.
Add a stop by Address, POI, My Favorites, or Recent Locations. Select
one of these options, specify a location, and tap the OK button. The Add
Stop screen appears. You can change the location name, enter a comment,
or designate a different group. When you’re done, tap Save.
InVion
Model: GPS-3V106-IUS
Figure 32 - Specifying a Stop
37
Language : US
Page : 37 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
When in the Stops screen, you can use the following commands:
Use the Up or Down buttons to change the order of your
itinerary.
Shows the stop destination on the map and lets you select
a route type, Quick or Short. Tap Go to calculate the stop
destination.
Select the Show button to view the selected stop destination
on the map.
Stops Actions
You can tap the Actions button for the following command options:
Set as Origin Lets you designate the selected address as the route origin. You
Add Stop Lets you add a location by specifying an address from recent
Rename Stop Lets you change the stop information, such as name, comments,
Delete Stop Lets you remove a selected stop.
Optimize
Route
Information
would use this command when calculating a route from a point
other than your current location. Note: You are still connected to
the GPS signal.
locations, favorite locations, or pre-dened POIs, such as gas,
food, or lodging.
or route group.
Your trip itinerary is created by the sequence of stops entered.
This may not be the most efcient route. When you click Optimize
Stops, the software changes the order of stops to create the most
efcient route.
This button displays the location’s address information.
InVion
Model: GPS-3V106-IUS
38
Language : US
Page : 38 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
4. Settings
Prompts
From the Settings menu, tap the Prompts button. The Prompts
screen appears.
You can select the types of voice and visual notications that you
would like to use while navigating.
Voice Prompts
Speed
Warning
Route
Recalculation
Unreliable
GPS Signal
GPS Not
Found
Drive
Carefully
Visual Prompts
Text Directions are displayed as text.
Symbols Directions are displayed as symbols.
None Directions are not displayed.
Warns you when your car exceeds the speed limit. This prompt is
not active by default.
Activated when the software recalculates a new route. This prompt
is not active by default.
Warns that the GPS signal is too low and unreliable for navigation.
This prompt is automatically active by default.
Alerts you if the GPS signal is lost, or if the power has been
removed from the GPS receiver.
Reminder at the start of each journey. This prompt is automatically
active by default.
InVion
Model: GPS-3V106-IUS
39
Language : US
Page : 39 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Time Zone Settings
This screen lets you select your time zone.
You can select the Daylight Savings checkbox for the Time Settings to
automatically adjust for daylight savings.
Language Settings
Lets you select the language for text and voice travel messages and
driving directions.
GPS Settings
The software uses the GPS receiver to pinpoint your location. GPS
signals are automatically acquired and your vehicle’s location and
position are constantly updated unless you are working in the Free
Browse Map mode or you tap the GPS Off button. The GPS receiver
may take a few minutes to nd its initial location. For best results,
ensure that the GPS receiver has a clear view of the sky.
The following GPS information is displayed:
Longitude - The angular distance east or west on the earth’s surface.
•
Latitude - The location of a place north or south of the earth’s surface.
•
Speed - The rate of movement, as expressed by kilometers or miles
•
per hour.
Altitude - The height above sea level.
•
InVion
Model: GPS-3V106-IUS
40
Language : US
Page : 40 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
The GPS On and GPS Off buttons let you connect or
disconnect from the GPS receiver. If you are working in Free Browse
Map mode, the navigation device automatically disconnects from the GPS
receiver.
Tap the GPS Settings button to display the following Connection elds:
Delete Lets you permanently remove a selected map.
Note: Most Bluetooth receivers use COM 6 or COM 8. Most serial
receivers use COM 1.
Baud Rate This eld lets you specify the transmission rate of data.
Protocol This eld displays the GPS protocol. The default value is NMEA.
Note: Most receivers use NMEA 4800.
Connect to
GPS
This button lets you locate the GPS receiver by the values you
have entered in the COM, Baud, and Protocol elds.
Demo Button
Tapping the Start Demo button displays a simulated route. Many of
the navigation features are disabled when the Demo is running. You
can end the Demo by tapping the Stop Demo button.
InVion
Model: GPS-3V106-IUS
41
Language : US
Page : 41 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
5. Installation
PC Requirements
To install and use the Console, your PC must meet the following minimum
system requirements:
CPU: AMD/Intel® Processor (300 MHz or faster)
•
Operating System: Windows® 2000/XP
•
Memory: 128 MB RAM
•
Free space on hard drive for installation: minimum 500 MB
•
CD-ROM: 4x drive
•
Support ActiveSync 3.8 and higher.
•
Installing Active Sync
Before updating your GPS software, you will have to install Microsoft Active
Sync on your PC.
Steps to install Microsoft Active Sync
First you need to install Microsoft Active Sync on your PC. This is needed
1.
to permit the communication between your Navigation GPS device and
your PC. You can download it for free from the Microsoft website:
http://www.microsoft.com/windowsmobile/activesync/default.mspx
After the download, follow the instructions on the Microsoft website.
2.
Note: Active Sync requires Windows XP.
Installing the Console
To install the Console:
Insert the DVD-ROM into the PC’s CD-ROM drive. The Console
1.
Installation Wizard prompts you to select the language used for the
installation process. When you have selected a language, click OK.
Please read the Welcome message and click Next.
2.
The wizard is ready to install the Console. Click Next.
3.
The Installation Status box displays the progress of the installation
4.
process.
When the installation is complete, click the Finish button to close the
5.
wizard.
Note: You can uninstall the Console by opening the Microsoft® Windows Programs
menu, selecting DestinatorApps>Uninstall Console.
InVion
Model: GPS-3V106-IUS
42
Language : US
Page : 42 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Console Toolbar
The following options are available from the Console Toolbar:
Figure 33 – Console Toolbar
Install
Software
Install/
Remove Maps
Favorites
Importer
Favorites
Exporter
Lets you install new software to your device.
Lets you install or remove a map. For more information, see
Installing a Map (on page 44).
Lets you download a list of your favorite locations from your PC
to the selected My Favorites group on your device. For more
information, see Import Favorite Location (on page 45).
Lets you download a category of favorite locations from your
device to a selected folder on your PC. For more information, see
Export Favorite Location on page 47.
Installing the software on your GPS device
You can use the accessories provided with your GPS device along with the
DVD-ROM to install new software on your GPS navigation device.
Note: The GPS device comes with a SD card that is pre-loaded with
software.
Do not attempt to install new software unless you have a
technical background and you are sure of what you are doing. For
further information and technical support please visit our website at
www.supportplususa.com.
To install software onto your GPS device you must have Active Sync already
installed on your PC:
1.
Open the Console.
Connect the GPS device to your PC via the USB cable provided.
2.
3.
When the PC asks you to locate the driver for the new hardware, insert
the DVD-ROM into your PC.
From the Target Device window in the Console, click on Change.
4.
5.
Select Storage Card as the target device and then click on OK.
Click on the Install Software button on the Console.
6.
InVion
Model: GPS-3V106-IUS
43
Language : US
Page : 43 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Map Screen Interface
Figure 34 – Console
Standard Maps Maps available for installation.
My Maps Maps that have been customized from a standard map.
Installed Maps Standard and customized maps that are already loaded on
your device.
Installing a Map
To install a map:
1.
From the
Remove Maps button. The Target Device dialog box appears.
Select either Storage Card or Removable Disk. The amount of memory
2.
available for the selected target device appears on the Target Device
Memory Balance pane.
3.
The installed map appears in the
Standard Maps pane, select a map and click the Install/
Installed Maps pane.
InVion
Model: GPS-3V106-IUS
44
Language : US
Page : 44 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Load Map
On the Console, you can refresh your maps by clicking Tools>Refresh
New Map Data. Select the map that you wish to load by clicking on the map
image or select it from the list. A checkmark represents a selected map.
From the Target Device pane, click the Change button to specify where
to install the map. You can choose from Storage Card, or Removable Disk.
After you have selected your target device and have conrmed that there’s
sufcient memory, click the Install/Remove Maps button. Your selected
maps are installed and appear in the Installed Maps pane.
Remove Map
In the Target Device pane, click the Change button and select the location
from where to remove the map. You can choose from Storage Card, or
Removable Disk. This updates the Installed Map pane.
The Installed Map pane displays a list of all the loaded maps available.
Select the check box by the map you want to remove. Click the Install/
Remove Maps button to remove the selected map.
Import Favorite Location
The Favorites Importer lets you import content created and provided
externally as a new Favorites category on the device.
You can download a list of favorite locations from your PC to your device.
The list must be contained in comma-separated values (.csv) les. As part
of the download procedure, you convert the .csv les to .dat les for storage
on your device by using the Conversion Utility, as shown below.
InVion
Model: GPS-3V106-IUS
45
Language : US
Page : 45 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Figure 35 – Favorites Importer Conversion Utility
Note: The Favorites Importing le structure must be in .csv format.
The .csv le contains the following elds:
Fav. Place 1 Comment 1 39.21370 38.78903 8033 Munich 173
Fav. Place 2 Comment 2
Fav. Place e Comment 3
Note: The Longitude and Latitude are numerical values. All the others are string
values.
24.79360 37.08604 75010 Paris 3013
44.97889 23.82718 8044 Zurich 123
To import a .csv le:
On the Console, click on a standard map. This enables the Installing
4.
Map and Favorites Importer features.
Click the Favorites Importer button. The Converter dialog box is
5.
displayed.
Select the .csv le, specify a category name, and click the Convert
6.
button. The Report Area displays a message stating that the content of
the le has been converted and that the le is ready for download.
Download the le to your device by clicking the Download button.
7.
46
InVion
Model: GPS-3V106-IUS
Language : US
Page : 46 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Export Favorite Location
You can export a list of favorite locations from your device to your PC. The
list will be stored in Comma-Separated Values (.csv) les. As a part of the
export procedure, you convert the .dat les to .csv format for storage on
your PC by using the Conversion Utility.
Figure 36 – Favorite Export Conversion Utility
To export a .dat le:
Click the Favorites Exporter button. The Converter dialogue is
8.
displayed.
9.
Click the
category name, and click the Convert button. The Report Area displays
a message stating that the content of the le has been converted and
that the le is ready to Upload.
Upload the le to your PC by clicking the Upload button.
10.
Browse button and then select the .dat le. Specify a
InVion
Model: GPS-3V106-IUS
47
Language : US
Page : 47 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
III. MP3/Movie Player
For Loading Music and Movies using the SD card and card reader
Insert the card reader into your PC’s USB port and insert the SD card
1.
into the card reader.
Open the SD card in “My Computer” and make sure that there are two
2.
folders named MP3 and MP4. If they do not exist create them.
Add your music les to the MP3 folder and add your movie les to the
3.
MP4 folder in the SD card.
Wait ten seconds after the le transfer is nished before removing the
4.
SD card from the reader, and then safely remove the card reader.
5. Insert the SD or MMC memory card to the card slot.
6. Tap
The folder list will be displayed.
7. Tap SDMMC DISK folder to open the folder. The le list will be
displayed.
on the Top Menu to change to Media player mode.
48
InVion
Model: GPS-3V106-IUS
Language : US
Page : 48 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
8. Select a folder and double tap to open it.
9. Select and double tap a le to start the playback.
The following buttons appear on the Entertainment screens.
Tap to display the entertainment interface.
Tap to scroll up the folder list or le list.
Tap to scroll down the folder list or le list.
Tap to return to the folder list.
Tap to play the mpeg4 le (*.avi) in full screen mode.
Tap to return to the le list.
Tap to play the les in the SD/MMC card in a random order.
Tap to play a le or all the les repeatedly.
Tap to return to the Top Menu.
Tap to play the previous track.
Tap to pause the playback.
Tap to play the next track.
Tap to stop the playback.
Tap to decrease the volume.
Tap to increase the volume.
InVion
Model: GPS-3V106-IUS
49
Language : US
Page : 49 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
IV. Specications
CPU: Arm 400Mhz
•
Operate System: Windows CE.Net 4.2
•
GPS : SIRF 3 High Sensitivity Receiver(20 channel)
•
N-Flash: 32M (Optional)
•
SDRAM: 64M
•
SCREEN: 3.5’ 4:3 320*240(RGB)
•
MP3 Player: Via SD/MMC card
•
Fm Transmitter: Build-in(Optional)
•
Working Temperature: -15°C --- +60°C
•
SIZE: 120*73*26(MM)
•
WEIGHT: 180g
•
Accessories:
5V DC Car Adapter
•
100—240V AC Adapter
•
Windshield Mount
•
Mounting bracket
•
Headset
•
USB Cable
•
Touch pen
•
Protective pouch
•
Printing: G/B, User Manual and Outer Carton
•
InVion
Model: GPS-3V106-IUS
50
Language : US
Page : 50 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
V. Legal
1. Notices, Disclaimers, and Terms of Use
1. Limited Product Warranty Destinator Technologies, warrants to the Client that the Products shall substantially conform
to Destinator Technologies’ specication for a period of one (1) year from the date of the original purchase by the end
user (the “Warranty Period”). As Destinator Technologies’ sole obligation and Client’s exclusive remedy for any breach
of warranty, Destinator Technologies agrees, at its sole option, to (i) use reasonable efforts to repair the Product with
new or refurbished replacement parts; (ii) replace the Product with a new or refurbished unit; or (iii) refund the purchase
price, provided Client returns the defective Products to Destinator Technologies with proof of purchase and Destinator
Technologies’ authorization.
Destinator Technologies’ warranty hereunder does not apply in case of any damage caused by accident, abuse, misuse,
misapplication, or alteration of any kind performed by anyone other than Destinator Technologies. The Products are not
designed or licensed for use in mission-critical applications, or in hazardous environments, requiring fail-safe controls,
including without limitation operation of nuclear facilities, aircraft navigation or communication systems, air trafc control,
or life support or weapons systems. Without limiting the generality of the foregoing, Destinator Technologies specically
disclaims any express or implied warranty or condition of tness for such purposes. Destinator Technologies’ warranty
does not, in any event, apply to physical damage to the surface of the Product or replacement. Destinator Technologies
shall have no obligation with respect to any data stored in the Product.
Except as expressly stated in this section, Destinator Technologies makes no warranties or includes any conditions
with respect to the products, express or implied, including, but not limited to, the implied warranties or conditions of
merchantability, tness for a particular purpose and no infringement.
2. Liability Limitation. In no event shall Destinator Technologies, be liable to Client, (and Client hereby waives any indirect,
special, incidental, or consequential damages in connection with) the transactions contemplated by this agreement,
whether or not such damages were foreseen, or their likelihood disclosed. Destinator Technologies shall not be liable to
Client or any third party claiming through Client, for any damages of any kind in excess of the amounts paid by Client
under the terms of this agreement with respect to the products giving rise to such damages. Some jurisdictions do not
allow the exclusion of or limitation on implied conditions, warranties or damages, thus some of the foregoing may not
apply to Client.
3. Intellectual Property Rights. Hardware and Software are proprietary to Destinator Technologies or its suppliers and are
subject to copyright and other intellectual property laws. Client’s only rights with respect to any Destinator Technologies
software included with the Products shall be provided, under the terms of Destinator Technologies’ software license.
The title to all Destinator Technologies Software remains with Destinator Technologies. Client agrees that Destinator
Technologies retains ownership of all rights, title and interest in all intellectual property, works of authorship, trade
secrets and like’s in all aspects of the Product(s). Client and its afliates and subcontractors agree not to reverse
engineer any aspect of the Software and/or Products supplied under this agreement and further agree to pay assessed
damages should such action take place.
4. Copyright and Copies. The Software (including any copy thereof) is owned by Destinator Technologies or its suppliers
and is protected by United States, Canada, European, Brazilian and Australian copyright and patent laws and
international treaty provisions. The Software copy is licensed to you the client, not sold to you, and you (the client) are
not an owner of any copy thereof. You may make one copy of the software for backup or archival purposes. You may
not otherwise copy the software, except as authorized by applicable law, nor the written materials accompanying the
Software. Destinator Technologies hereby reserves all rights not explicitly granted in this license agreement.
Copyright © 2006, Destinator Technologies
© 2006 Destinator is a registered trademark of Destinator Technologies Inc. Unauthorized duplication
is a violation of all applicable laws.
Other names and brands mentioned herein may be the property of their respective owners. Patents
pending.
Map data: © 1993 – 2006 NAVTEQ. All rights reserved.
Please note, that the 1993-2006 is due to changes depending on which map
release is used, if Q3 2005 is used, then it must be 1993-2005, if Q1 2006 is
used, then it must be 1993-2006
InVion
Model: GPS-3V106-IUS
51
Language : US
Page : 51 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
2. Copyright Notice
All rights reserved, except as expressly provided herein. No part of this
manual may be reproduced, copied, transmitted, disseminated, downloaded
or stored in any storage medium for any purpose without the express written
consent of SupportPlus. SupportPlus hereby grants permission to print one
copy of this manual and any revision hereto, provided that such printed
copy of this manual must contain the complete text of this copyright notice
and provided further that any unauthorized commercial distribution of this
manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. SupportPlus
reserves the right to change or improve its product and to make changes in
the content without obligation to notify any person or organization of such
changes or improvements.
SupporPlus and Invion are registered trademarks and may not be used
without express permission.
SiRF, SiRFstar and the SiRF logo are registered trademarks of SiRF
Technology, Inc. SiRFstarIII and SiRF Powered are trademarks of SiRF
Technology, Inc.
Windows® is a registered trademark of the Microsoft Corporation in the
United States and/or other countries.
InVion
Model: GPS-3V106-IUS
52
Language : US
Page : 52 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
3. Safety advice
Failure to avoid the following potentially hazardous situation could result in
an accident or collision resulting in death or serious injury.
When installing the until in a vehicle, place the unit securely so that it does
not interfere with vehicle operating controls or obstruct the driver’s view of
the road.
Do not mount where the driver’s eld of vision is blocked.
•
Do not place unsecured on the vehicle dash.
•
Do not mount in front of an airbag eld of deployment.
•
When navigating, carefully compare information displayed on the unit to
all available navigation sources, including information from street signs,
visual sightings, and maps. For safety, always resolve any discrepancies or
questions before continuing navigation.
Always operate the vehicle in a safe manner. Do not become focused on
the unit while driving, and always be fully aware of all driving conditions.
Minimize the amount of time spent viewing the screen of the unit while driving
and use the voice commands when possible. Do not input destinations,
change settings, or access any functions that require prolonged use of the
unit’s controls while driving. Pull over and come to a complete stop before
attempting any such operations.
Do not expose the unit to excessive heat or throw the device into re.
•
Old appliances do not belong in the household waste. Dispose of old
•
appliances correctly. Your local administration can give you information
about collection locations and opening times.
Packaging materials are raw materials and can be used again. Separate
the packaging, and in the interest of the environment dispose of it properly.
Further information is available from your local administration.
53
InVion
Model: GPS-3V106-IUS
Language : US
Page : 53 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
4. Caution
Failure to avoid the following potentially hazardous situations may result in
injury or damages.
This unit is designed to provide you with route suggestions. It does not reect
road closures or road conditions, trafc conditions, weather conditions, or
other factors that may affect safety or timing while driving.
Use the unit only as a navigational aid. Do not attempt to use the unit for any
purpose requiring precise measurement of direction, distance, location or
topography. This product should not be used to determine ground proximity
for aircraft navigation.
The Global Positioning System (GPS) is operated by the United States
government, which is solely responsible for its accuracy and maintenance.
The government’s system is subject to changes which could affect the
accuracy and performance of the unit. Although the unit is a precision
navigation device, any navigation device can be misused or misinterpreted
and therefore, become unsafe.
Important Information
Map Data Information: On virtually all data sources contain inaccurate or
incomplete data to some degree. This is particularly true outside the United
States, where complete and accurate digital data is either not available or
prohibitively expensive.
Notice to drivers in California and Minnesota: State law prohibits drivers
in California and Minnesota from using suction mounts on their windshields
while operating motor vehicles. SupportPlus takes no responsibilities for any
nes, penalties or damages that may be incurred as a result of disregarding
this notice. (See California Vehicle Code Section 26708(a); Minnesota
Statues 2005, Section 169.71.)
InVion
Model: GPS-3V106-IUS
54
Language : US
Page : 54 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
5. FCC compliance
The unit complies with Part 15 of the FCC interference limits for Class
B digital devices for HOME OR OFFICE USE. The limits are designated
to provide more reasonable protection against harmful interference in a
residential installation and are more stringent than “outdoor” requirements.
Operation of this device is subject to the following conditions:
This device may not cause harmful interference.
1.
This device must accept any interference received, including interference
2.
that may cause undesired operation
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with these instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
you are encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver
•
Connect the equipment into an outlet on a circuit different from that to
•
which the receiver is connected.
Consult an experienced radio/TV technician for help
•
Notice: This device has no user-serviceable parts. Repairs should only be
made by an authorized service center.
Unauthorized repairs or modications could result in permanent damage
to the equipment and void your warranty and your authority to operate this
device.
Do not attempt to open the casing to change or modify the unit in any way.
InVion
Model: GPS-3V106-IUS
55
Language : US
Page : 55 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
VI. Claims & Warranties
In case of possible product defects, please contact our Service team by our
Website or E-mail. For this reason we recommend you save your purchase
receipt. To register your product, go to the SupportPlusUSA website and
click on “Register Your GPS Now”.
Service:
For technical questions, information about our products, and for spare part
orders, our Service team is available as follows:
Website: www.supportplususa.com
E-mail: info@supportplususa.com
Important note: Please do not send your device to our address without
having been requested to do so by our Service team. The costs and the
risk of loss for unsolicited mailings will be borne by the sender. We reserve
the right to refuse the acceptance of unsolicited mailings or to return the
corresponding merchandise to the sender carriage forward, that is, at the
sender’s expense.
Warranty: If for any reason the registered product does not function as it
should due to factory defects, it can be returned within 1 year from the date
of purchase.
This warranty does not cover failures due to abuse, misuse, accident, or
unauthorized alterations or repairs.
In no event will SupportPlus be liable for any incidental, special, indirect, or
consequential damages resulting from the use, misuse, or inability to use
this product.
Note: Warranty is only valid if unit is registered within 30 days of purchase.
56
InVion
Model: GPS-3V106-IUS
Language : US
Page : 56 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
VRS 2.3
InVion
Model: GPS-3V106-IUS
Language : US
Page : 57 (of 51 Pages)
Version : 2.3
Date : 2007.01.10
Loading...