Invacare Tilt-in-Space Wheelchair User Manual

Invacare

Solara

Limited Tilt-in-Space Wheelchair

Invacare

Solara

Limited Wheelchair

04-034_0991 4/2/04 9:18 PM Page 1

Invacare Corporation

www.invacare.com

USA

One Invacare Way Elyria,Ohio 44035-41 90 (800) 333-6900

Canada

570 Matheson Blvd.E., Unit 8 Mississauga,Ontario L4Z 4G4 Canada (800) 668-5324

Invacare,Infinity and Solara are registered trademark and Yes,you can., the blue medallion design, Personal Back and Quick Set and Solara are trademarks of Invacare Corporation. Specifications are subject to change without notification. Accessories and seating products shown in the photographs are not necessarily included in the base price of wheelchair. Refer to current price list located at www.invacare.com

‘‘Invacare says ‘Yes, you can,™’ and I couldn’t have said it better myself.’’

Specifications

Frame style Tilt Seat widths 12"–14" Seat depths 15"–18" Back height 20" or 24" Back angle adjustment 90˚ to 120˚ in 10˚ increments Tubing diameter 1" Tilt range 0˚ to 45˚ Weight capacity 200 lb. Weight of chair 43 lb. Limited warranty Lifetime on frames and

crossbraces

Front and rear transport tie down brackets are mounted where caregivers can reach.**

he Solara®Limited pediatric tilt-in-space wheelchair provides consumers with one of the most prescribed weight shifting tilts when funding options are limited. Based on the revolutionary Solara, the Solara Limited pediatric wheelchair provides a durable,rigid base along with an

appropriate number of the most important options requir ed to meet the consumers’ needs.

The Solara Limited Base Chair Includes

• Rigid,rear wheel weight shift tilt-in-space frame with 45˚

of posterior tilt and up to 10˚ of anterior tilt

• 200 lb.weight capacity

• Seat widths (12"-14")*

• Seat depths (15"-18")

• Transport tie down option**

• Cantilever ,non-locking bolt on arms

• Fixed back height (20" or 24")

• Three frame finishes (Wet Black,Red or Midnight Blue)

• 12" composite wheels

• 70˚ and 90˚ center pivot front rigging

• Flip-up composite footplates

• Attendant operated wheel locks

• Permanent axles

• Anti-tippers

• Adjustable angle back

• 17" or 18.25" front seat to floor height (factory set at 17")

*Growable to 18" wide with additional parts.

• Recliner back

• Larger seat widths and depths (20",21" and 22")

• Conventional and cantilever adjustable height arms

• Flush or drop mounted seat pans

• 6" x 2" semi-pneumatic casters

• Pneumatic tires

• Flat-free inserts

• Elevating or articulating legrests

• Adjustable angle Flip-up footplates

• Heel and toe loops

• Legrest accessories

• Invacare seating and positioning products

• Rigidizers and drop base

• Rigidizing handle bars

• Push button seat positioning strap

Other A vailable Options Include

Solara Limited shown in red with 70˚ swingaway front rigging, flip-up composite footplates, 6" x 2" semi-pneumatic casters, 12" composite wheels with pneumatic tires, conventional adjustable height full length arms, adjustable angle rigidizing handle bar, and transport tie down brackets .

**The Solara®wheelchair was crash tested with an Invacare Personal Back™10 and Infinity®seat cushion and conforms with the requirements of ANSI/RESNA WC/19 v ol.1 –

Section 19.5.3 (Frontal Impact T est). Invacare has not performed testing with any other seating system. See Solara sell sheet (form no.04-036) for ANSI/RESNA WC/19 sec.6.2 Presale Literature Notification.Invacare recommends that wheelchair users NOT be transported in vehicles of any kind while in wheelchairs. As of this date,the Department of Transportation has not approved any tie down systems for transportation of a user while in a wheelchair in a moving vehicle of any type.

Transport locking pins should be used to lock gear rack when chair is transported by bus or van.**

04-034_0991 4/2/04 9:19 PM Page 2