Invacare Silhouette 3002801 User Manual

Silhouette® Lateral Lock-out Kit

Assembly, Installation and Operating Instructions

Kit Part No. 3002801

SAVE THESE INSTRUCTIONS

NOTE: Check all parts for shipping damage before us­ing. In case of damage, do not use. Contact the dealer
for further instructions.

SAFETY SUMMARY

The following reccommendations are made for safe
installation and use of the Silhouette Lateral Lock­out Kit:

GENERAL WARNINGS

DO NOT install this equipment without first
reading and understanding this instruc­tion sheet. If you are unable to under­stand these Warnings, Cautions and In­structions, contact a healthcare profes­sional, dealer or technical personnel if
applicable before attempting to install
this equipment - otherwise, injury or dam­age may occur.

Your therapist and physician should be
consulted if you have any questions re­garding individual limitations and needs.

DESCRIPTION

The lateral lock-out kit is used in environments where it is
not desirable to be able to quickly remove the lateral pads.

INSTALLING/REMOVING LATERAL
LOCK-OUT KIT (FIGURE 1)

Installing

1. Place the lateral pad in the mounting bracket and ad­just if necessary. Refer to the Silhouette Owner's
Manual part number 1080355 for installation/adjustment
instructions.

2. Take the O-ring and push it over the quick-release but­ton on the lateral mounting bracket so that the O-ring
fits entirely in the groove between the bracket and the
button.

Removing

1. To restore the quick-release functionality to the Silhou­ette® lateral, remove the O-ring with tweezers or a
paperclip.

Lateral Mounting

Quick-Release Button

Bracket

O-ring

FIGURE 1 - INSTALLING/REMOVING LATERAL LOCK-OUT KIT

Invacare Corporation www.invacare.com

USA Canada

One Invacare Way 5970 Chedworth Way Invacare is a registered trademark of Invacare Corporation.
Elyria, Ohio USA Mississauga, Ontario ©
44036-2125 L5R 3T9, Canada
800-333-6900 800-668-5324 Form No. 99-112 Part No. 0900103 Rev (2) 11/99

1999 Invacare Corporation