User Manual
DEALER: This manual MUST be given to the user of the product.
USER:
BEFORE using this product, read this manual and save for
future reference.
Invacare® Matrx® Flo-tech
Model Number FT
1 General
1.1 Symbols
Signal words are used in this manual and apply to hazards or unsafe practices which could result in
personal injury or property damage. See the information below for definitions of the signal words.
WARNING
1.2 Overview
Important Information
The best way to avoid problems related to pressure sores is to understand their causes and your role in
a skin management program. Your therapist and physician should be consulted if you have questions
regarding individual limitations and needs.
All cushions should be selected carefully. Working with your therapist and physician is the best way to
assure that a cushion choice matches your individual needs. As the needs of the individual become more
complex, cushion evaluation becomes more important.
Invacare Matrx Flo-tech
The Invacare Matrx Flo-tech cushion uses a
combination of molded foam and dual layer fluid
sacs to provide the highest level of skin protection
for users with high risk of skin breakdown.
Fluid Sac
The fluid sac utilizes a unique dual-layer fluid
design in the ishcial/sacral areas to help prevent
bottoming out.
Inner Liner and Outer Cover
The inner liner is moisture resistant to protect
the foam. The outer cover is water resistant and
breathable. Regular cleaning and inspection of the
covers is recommended. Refer to Care and
Maintenance on page 3.
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result in property
damage or minor injury or both.
Gives useful tips, recommendations and information for efficient, trouble-free use.
Outer
Cover
Inner
Liner
Fluid
Sac
Foam Base
Part No 1171791 1 Invacare® Matrx® Flo-tech
2 Safety
Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact
carrier/dealer for further instruction.
2.1 Intended Use
The Invacare Matrx Flo-tech cushion is designed to provide the highest level of skin protection for users
with high risk of skin breakdown.
2.2 General Warnings
WARNING
2.3 Weight Limitation and Model Numbers
DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT
FIRST COMPLETELY READING AND UNDERSTANDING THESE INSTRUCTIONS AND
ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER’S MANUALS, SERVICE
MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH THIS PRODUCT OR OPTIONAL
EQUIPMENT. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS OR
INSTRUCTIONS, CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL
PERSONNEL BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE, INJURY OR
DAMAGE MAY OCCUR.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare
accessories. Accessories designed by other manufacturers have not been tested by Invacare and
are not recommended for use with Invacare products.
INSTALLATION WARNING
After any adjustments, repair or service and before use, make sure that all attaching component
parts are secure.
Ensure the seat cushion is properly secured to the wheelchair before using. Otherwise injury or
damage may occur.
Installing a cushion on a wheelchair may affect the center of gravity of the wheelchair and may
cause the wheelchair to become unstable, potentially resulting in injury.
WARNING
Skin condition should be checked very frequently after the installation of any new seating system.
Your therapist and physician should be consulted if you have any questions regarding individual
limitations and needs.
Working with your therapist, physician, and equipment supplier is the best way to assure that a
seating choice matches your individual needs.
As the needs of the individual become more complex, the seating evaluation becomes more
important.
The cushion is designed to be used only at room temperature. If it is left at lower temperatures,
always allow it to warm to room temperature before using. Sitting on extremely cold or hot
surfaces can cause skin damage.
Avoid sharp objects or exposure to excessive heat or open flame.
Refer to the chart for the weight limitation and stock model numbers.
Configured model numbers are: FT
Grey = size not available
Invacare® Matrx® Flo-tech 2 Part No 1171791
WIDTH DEPTH WEIGHT
14 IN
(36 CM)
14 in (36 cm) FT1414 FT1416
15 in (38 cm)
16 in (41 cm) FT1616 FT1617 FT1618 FT1619 FT1620 FT1621
17 in (43 cm) FT1716 FT1717 FT1718 FT1719 FT1720 FT1721
18 in (46 cm) FT1816 FT1817 FT1818 FT1819 FT1820 FT1821
19 in (48 cm) FT1916 FT1917 FT1918 FT1919 FT1920 FT1921
20 in (51 cm) FT2016 FT2017 FT2018
20 in (51 cm) FT2020 FT2022 500 lbs
21 in (53 cm)
22 in (56 cm) FT2218 FT2220 FT2222
23 in (58 cm)
24 in (61 cm) FT2420 FT2422
16 IN
(41 CM)
FT1516 FT1517 FT1518 FT1519 FT1520 FT1521
17 IN
(43 CM)
18 IN
(46 CM)
FT2118 FT2120 FT2122
19 IN
(48 CM)
20 IN
(51 CM)
FT2320 FT2322
21 IN
(53 CM)
22 IN
(56 CM)
(136 kg)
(227 kg)
3 Usage
Avoid the use of additional covers or padding between the user and the cushion, as this could
reduce its effectiveness.
3.1 Installing the Invacare Matrx Flo-tech
1. Position the cushion so the material identification tags (not shown) face the rear.
2. Align the hook and loop strips (not shown) on the bottom of the cushion with those on the
wheelchair seat.
3. Position the cushion onto the wheelchair as far back as possible.
4. Press down to ensure the hook and loop strips are firmly engaged.
LIMIT*
300 lbs
4 Care and Maintenance
4.1 Cleaning
CAUTION
Outer Cover
The cover can be wiped clean with a damp towel.The cover can be removed for laundering. Unzip the
cover and carefully remove the foam with inner liner. Machine wash in warm water and hang dry. Dry
completely before reinstalling the outer cover .
Inner Liner
The inner liner should not be removed from the foam.
4.2 Inspection
Visually inspect parts including upholstery materials, foams (if accessible), and plastics, for deformation,
corrosion, breakage, wear or compression.
Part No 1171791 3 Invacare® Matrx® Flo-tech
DO NOT use cleaning agents containing phenols or alcohols. Otherwise product damage may
occur.
WARNING
DO NOT continue to use this product if problems are discovered. Corrective maintenance can
be performed at or arranged through your equipment supplier.
5 After Use
5.1 Reuse
WARNING: Risk of Injury
Always have a dealer inspect the product for damage before transferring the product to a different
user. If any damage is found, DO NOT use the product. Otherwise injury may occur.
6 Warranty
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS
MANUFACTURED AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of our products.
This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.
Invacare/Motion Concepts warrants this product to be free from defects in materials and workmanship for three years of use by original purchaser.
This warranty does not apply to punctures, tears or burns, nor to the removable cushion cover or inner liner. If within such warranty period any
such product shall be proven to be defective, such product shall be repaired or replaced, at Invacare's/Motion Concepts’ option, with refurbished or
new parts. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product.
Product repairs shall not extend this warranty - coverage for repaired product shall end when this limited warranty terminates. Invacare's/Motion
Concepts’ sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement.
For warranty service, please contact the dealer from whom you purchased your Invacare/Motion Concepts product. In the event you do not
receive satisfactory warranty service, please write directly to Invacare/Motion Concepts at the address on the back cover. Provide dealer's name,
address, model number, the date of purchase, indicate nature of the defect and, if the product is serialized, indicate the serial number.
Invacare Corporation/Motion Concepts will issue a return authorization. The defective unit or parts must be returned for warranty inspection using
the serial number, when applicable, as identification within thirty (30) days of return authorization date. DO NOT return products to our factory
without our prior consent. C.O.D. shipments will be refused; please prepay shipping charges.
LIMITATIONS AND EXCLUSIONS: THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE
TO ADHERE TO THE ENCLOSED INSTRUCTIONS. IN ADDITION, THE FOREGOING WARRANTY SHALL NOT APPLY TO SERIAL
NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED; PRODUCTS SUBJECTED TO NEGLIGENCE,
ACCIDENT, IMPROPER OPERATION, MAINTENANCE OR STORAGE; OR PRODUCTS MODIFIED WITHOUT INVACARE'S/MOTION
CONCEPTS’ EXPRESS WRITTEN CONSENT INCLUDING, BUT NOT LIMITED TO: MODIFICATION THROUGH THE USE OF
UNAUTHORIZED PARTS OR ATTACHMENTS: PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT
WITHOUT THE SPECIFIC CONSENT OF INVACARE/MOTION CONCEPTS; PRODUCTS DAMAGED BY CIRCUMSTANCES BEYOND
INVACARE'S/MOTION CONCEPTS’ CONTROL; PRODUCTS REPAIRED BY ANYONE OTHER THAN AN INVACARE/MOTION
CONCEPTS DEALER, SUCH EVALUATION SHALL BE SOLELY DETERMINED BY INVACARE/MOTION CONCEPTS.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, IF ANY, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE REMEDY FOR
VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT
PURSUANT TO THE TERMS CONTAINED HEREIN. INVACARE/MOTION CONCEPTS SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.
Invacare
USA
One Invacare Way
Elyria, Ohio USA
44036-2125
440-329-6000
www.invacare.com
Canada
570 Matheson Blvd. E Unit 8
Mississauga Ontario
L4Z 4G4 Canada
800-668-5324
800-333-6900
Motion Concepts
USA
700 Ensminger Rd. Suite 112
Tonawanda, NY 14150
888-433-6818
www.motionconcepts.com
Canada
84 Citation Dr.
Concord, Ontario L4K 3C1
905-695-0134
866-748-7943
© 2011 Invacare Corporation. All rights reserved. Republication, duplication or
modification in whole or in part is prohibited without prior written permission from
Invacare. Trademarks are identified by ™ and ®. All trademarks are owned by or
licensed to Invacare Corporation or its subsidiaries unless otherwise noted.
Part No 1171791 Rev A - 02/11
Loading...